Acetone → 4-[(4-(Hydroxydiphenylmethyl)-1-piperidinyl]-1-hydroxybutyl]-alpha,alpha-dimethylbenzeneacetic acid hydrochloride hydrate

Participants

Reaction Conditions

Reaction Steps

Place ethyl 4-[4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]-1-oxobutyl]-α,α-dimethylbenzeneacetate (56.12 g, 0.1064 mol) in a 1-L three necked round-bottom flask and fit the flask with a mechanical stirrer, a Claisen head, a thermometer and a reflux condenser with a nitrogen bubbler on top. Add methanol (300 mL) and turn the stirrer on. Dilute the slurry with water (60 mL) and heat to reflux using a heating mantle controlled by a Therm-O-Watch. When the mixture reaches about 35° C., treat with 50% sodium hydroxide (34.05 g, 0.4256 mol) and rinse in with water (42 mL). Stir at reflux for 2 hours, 15 minutes, cool over 1 hour to 35° C. and then treat with sodium borohydride (2.02 g, 0.0534 mol). Stir for 7.5 hours and allow to stand at room temperature without stirring for 1.75 days. Warm the mixture to 35° C. and quench with acetone (15.5 mL, 0.21 mol) and stir for 2 hours. Add water (60 mL) and adjust the pH to 2.5 with 32% hydrochloric acid (65.22 g). Cool to 40° C. and rinse the pH probe with water (25 mL). Hold the temperature at 33° C. for 10 minutes, add a few seed crystals and add water over about 4 hours (192 mL) at 35° C. Cool the slurry to −12° C. over about 45 minutes and isolate the solid by filtration (586.2 g). Wash with water (2×100 mL) and then with ethyl acetate (100 mL, prechilled to about −10° C.). Vacuum dry overnight (1 mmHg, 50° C.) to give 4-[4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]-1-hydroxybutyl]-α,α-dimethylbenzeneacetic acid hydrochloride hydrate (Form IV); mp 115–116° C. (dec).

Provenance & Evidence