Ammonium Hydroxide → 6-Aminohexanoic Acid

Participants

Reaction Conditions

Reaction Steps

A 100 cc stainless steel (Parr reactor) stirred batch autoclave was used for the hydrogenation of 5-cyanovaleric acid (5CVA) in the presence of 5% Ru/TiO2 catalyst. 10.0 g of 5CVA mixture (92.8% 5CVA, 3.1 % 3CVA, and 3.4% 4-cyanovaleric acid (4CVA)), 1.0 g of 1-methyl-2-pyrrolidinone (NMP, internal standard), 40.0 g of ammonium hydroxide solution, and 1.0 g of 5% Ru/TiO2 were added in the reactor cup. The reactor was then assembled by securing the cup to the head, pressure tested with 100 psig (0.69 MPa) of nitrogen, and purged with nitrogen, followed by hydrogen. The reactor was then pressurized to 250 psig (1.8 MPa) with hydrogen and heated up to the reaction temperature (110° C.), under constant stirring. The pressure in the reactor was then brought up to the desired level (900 psig (6.3 MPa)) and maintained at that level throughout the entire duration of the run (4 hr). During the course of the reaction, samples (0.2 cc) were withdrawn periodically from the reactor through a sample port, connected to a dip leg inside the reactor, and analyzed by Hewlett-Packard 6890 gas chromatograph after derivatizing the sample with a mixture of bis-trimethylsilyl trifluoro acetamide (BSTFA) and trimethylchlorosilane. The conversion of 5CVA and selectivities and yields of 6-aminocaproic acid (6ACA) and caprolactam (CL) as a function of reaction time have been presented in Table 1.

Provenance & Evidence