Sodium Hydroxide → HCID 69256238, compound

Participants

Reaction Conditions

Reaction Steps

A 22 L, five neck round bottom flask, was equipped with an overhead stirrer, reflux condenser, thermocouple temperature read out, and heating mantle. The following reaction was run under a dry nitrogen atmosphere. Reagent acetone (13000 mL) and 4-[(4-chloro-2-hydroxy-benzoyl)amino]butanoic acid (500.0 g, 1.94 mol) were charged to the reactor and stirring was started. The reaction slurry was heated to 50° C. until a hazy brown solution was obtained. The warm solution was pumped through a warm pressure filter dressed with Whatman #1 paper into a clean 22 L reactor. The clear yellow filtrate was heated to 50° C. while stirring. Sodium hydroxide solution (50% aqueous; 155 g, 1.94 mol) was charged to the reactor while maintaining vigorous agitation. After the base addition was complete, the reactor was heated to reflux (60° C.) for 2.5 hours and then allowed to cool slowly to ambient temperature. The product was isolated by vacuum filtration through a sintered glass funnel and dried in a vacuum oven at 50° C. for 24 hours to give 527.3 g of sodium 4-[(2-hydroxybenzoyl)amino]butanoate as an off-white solid. The yield was 97.2%.

Provenance & Evidence