反应详情

温度

90 °C

Add 6-bromo-4-[2-(6-methyl-pyridin-2-yl)-5,6-dihydro-4H-pyrrolo[1,2-b]pyrazol-3-yl]-quinoline (22.7 g, 45 mmol) to a mixture of sodium acetate (19 g, 230 mmol) and the palladium catalyst [1,1′-bis(diphenylphosphino)ferrocene]dichloropalladium(II), complex with dichloromethane (1:1) (850 mg, 1.04 mmol) in 130 mL methanol. Place the mixture under 50 psi carbon monoxide atmosphere and stir while warming to 90° C. over 1 hour and with constant charging with additional carbon monoxide. Allow the mixture to cool over 8 hours, recharge again with carbon monoxide and heat to 90° C. The pressure may rise to about 75 PSI. The reaction is complete in about an hour when the pressure is stable and tic (1:1 toluene/acetone) shows no remaining bromide. Partition the mixture between methylene chloride (600 mL) and water (1 L). Extract the aqueous portion with an additional portion of methylene chloride (400 mL.) Filter the organic solution through a 300 mL silica plug and wash with 500 mL methylene chloride, 1200 mL ethyl acetate and 1500 mL acetone. Discard, the acetone portion. Combine appropriate fractions and concentrate to yield 18.8 g (87.4%) of the desired subtitled intermediate as a pink powder.

1. temperatureAllow the mixture to cool over 8 hours
2. waitThe reaction is complete in about an hour
3. customPartition the mixture between methylene chloride (600 mL) and water (1 L)
4. extractionExtract the aqueous portion with an additional portion of methylene chloride (400 mL.)
5. filtrationFilter the organic solution through a 300 mL silica plug
6. washwash with 500 mL methylene chloride, 1200 mL ethyl acetate and 1500 mL acetone
7. concentrationCombine appropriate fractions and concentrate