HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.2
  1. Home
  2. /Compound

Vinylidene fluoride

HCID 6369
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
24937-79-9
Standard SMILES
C=C(F)F
InChIKey
BQCIDUSAKPWEOX-UHFFFAOYSA-N
Molecular formula
C2H2F2
Average molar mass
64.03 g/mol
Monoisotopic mass
64.01245639

Overview

1,1-Difluoroethylene (or vinylidene fluoride) is a colorless gas which is flammable in the ranges of 5.5 to 21%. It is toxic by inhalation and contact. It is slightly soluble in water and soluble in alcohol and ether. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket.

Names & identifiers

Preferred name
Vinylidene fluoride
IUPAC
1,1-difluoroethene
English name
Polyvinylidene fluoride
Molecular formula
C2H2F2
Molecular weight
64.0340864

Names & synonyms

Vinylidene fluoride1,1-Difluoroethylene1,1-DIFLUOROETHENE75-38-7Vinylidene difluorideEthene, 1,1-difluoro-Ethylene, 1,1-difluoro-Genetron 1132aHalocarbon 1132ANCI-C60208NCI-C60204Difluoro-1,1-ethylene
Show more names
PVDFPOLY(VINYLIDENE FLUORIDE)poly(1,1-difluoroethylene)PVF2polyvinylidene difluoridePolyvinylideneFluoride(Pvdf)vinylidene fluoride homopolymerPoly(vinylidene fluoride) average Mw ~180,000 by GPC, average Mn ~71,000, beads or pelletsMW~530000MW~534000
UN19593C1IX2905BDTXSID3021439R1132aRefChem:6353DTXCID401439200-867-7Dalvor

Database identifiers

CAS
24937-79-9、75-38-7
PubChem CID
6369
DTXSID
DTXSID3021439
ChEMBL
CHEMBL116020

Properties

Computed structural properties

XLogP
1.3
Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
2
Rotatable bonds
0
Heavy atoms
4
Formal charge
0
Complexity
27

Experimental & physicochemical properties

Chemical ClassesFlammable agents - 4th degree
PFAS · 3 items

PFAS -> PFAS identified in REACH Regulation EC No. 1272/2008

PFAS -> Other/unspecified

PFAS -> Other/unspecified

PolymersPlastics & Rubber -> Vinyl Halides
SpringerMaterials PropertiesCoriolis coupling
LogP · 3 items

log Kow = 1.24

1.24

1.24

Odor · 2 items

Nearly odorless

Faint, ethereal

Density · 6 items

0.617 at 75 °F (liquid) (NTP, 1992) - Less dense than water; will float

0.617 g/cc at 24 °C (liquid)

Critical density = 417 kg/cu m; Heat of formation = -345.2 kJ/mol at 25 °C; Heat of polymerization = -474.21 kJ/mol at 25 °C; explosive limits = 5.8-20.3 vol % in air

Relative density (water = 1): 0.6

0.617 at 75 °F

2.21(relative gas density)

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 3.3% (12 of 362) of reports.

Danger

H220 (96.1%): Extremely flammable gas [Danger Flammable gases]

P203, P210, P222, P280, P318, P337, P377, P381, P403, P405, P410+P403, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 362 reports by companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Hazard information

Regulatory Information · 4 items

Chemical: Ethene, 1,1-difluoro-

Ethene, 1,1-difluoro- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Ethene, 1,1-difluoro- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: 1,1-difluoroethylene (EC: 200-867-7)

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelFlammable Gas
Fire Hazards · 3 items

Excerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:

· EXTREMELY FLAMMABLE.

Extremely flammable. Gives off irritating or toxic fumes (or gases) in a fire. Gas/air mixtures are explosive. Explosive.

Fire PotentialFlammable, dangerous fire risk
Health Hazards · 2 items

Excerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 3 items

In 10.3 L closed containers with oxygen replenishment and carbon dioxide removal, and stocked with 3 rats, the rates of Vinylidene fluoride metab was 1% that of vinyl chloride.

Metabolism proceeded very slowly and was saturable at exposure concentrations of about 260 mg/cu m (100 ppm). The maximal metabolic rate was 1% that of vinyl chloride and less than 20% that of vinyl fluoride. Exposure of rats to vinylidene fluoride has been reported to result in some increase in the urinary excretion of fluoride.

Like other halogenated C1 and C2 compounds that are biotransformed to reactive metabolites, vinylidene fluoride causes changes in rat intermediary metabolism which lead to increased exhalation of acetone.

Absorption, Distribution and Excretion · 4 items

Inhalation comparatively studied. Metabolic elimination was saturable, dose-dependent process. Elimination determined by zero-order law at atmospheric concn above point of saturation, and otherwise by normal first-order kinetics.

... Concentrations of vinylidene fluoride were measured in blood of /B6C3F1/ mice during 6 hr exposures to nominal concentrations of 250, 3750 or 15,000 ppm vinylidene fluoride. A physiological model developed to simulate blood levels of /this cmpd/ in rats was adapted for mice by incorporating physiologically realistic parameters for mice where appropriate ( alveolar ventilation, cardiac output, blood flow to organs, and organ volumes) and by assuming that chemical specific parameters such as tissue/blood partition coefficients determined for rats could also be applied to mice. Measured steady state levels of vinylidene fluoride in blood of mice increased with increasing exposure concn. For both the 15,000 and 3750 ppm vinylidene fluoride exposures, the experimentally determined data fell within the 95% confidence interval predicted by the physiological model. For the 250 ppm vinylidene fluoride exposure, the experimentally determined values /for this cmpd/ in blood were lower than what was predicted by the model. Model predictions indicated that for mice, as observed for rats, levels of vinylidene fluoride would rise very rapidly, reaching steady state within minutes of exposure, and that at the end of exposure, blood levels will decline rapidly. At the two lowest concn, ... no vinylidene fluoride /could be detected/ in blood taken 15 min or longer after cessation of exposure, suggesting that the post exposure levels were at or below the limit of detection which was 4 ug/vinylidene fluoride/ml blood. For the 15,000 ppm exposure vinylidene fluoride could be detected in blood up to 15 min post exposure.

Related reactions

39 records
New reaction record
HRID 257706 reaction equation
HRID 257706As reactant
HRID 300165 reaction equation
HRID 300165As reactant
HRID 345976 reaction equation
HRID 345976As reactant
HRID 400623 reaction equation
HRID 400623As reactant
HRID 600757 reaction equation
HRID 600757As reactant
HRID 654208 reaction equation
HRID 654208As reactant
HRID 660362 reaction equation
HRID 660362As reactant
HRID 677452 reaction equation
HRID 677452As reactant
PreviousPage 1 of 5

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
ChEBI
CHEBI:82550
UNII
3C1IX2905B
EC Number
200-867-7
Nikkaji
J2.327.625I、J350F
Viscosity
7.7574 pascal-seconds (liquid) at boiling point
Color/Form · 2 items

Colorless gas

Colorless gas [Note: Shipped as a liquefied compressed gas].

Solubility · 6 items

0.018 g/100 g at 77 °F and 760 mmHg (NTP, 1992)

Slightly sol in water; sol in alcohol and ether

Water solubility = 6.3 cu cm/100 g at 25 °C and 10 kPa

Water solubility = 0.018 g/100 g at 25 °C and 760 mm Hg

Water solubility = 165 ppm at 25 °C

In water, 164.9 mg/L at 25 °C

Flash Point · 2 items

Flammable gas

NA (Gas)

Boiling Point · 5 items

-123 °F at 760 mmHg (NTP, 1992)

-85.7 °C

-83 °C

-123 °F

-122 °F

Physicochemical properties

Melting point
166 · 166-170°C
Tg
-38 · -38
Density
1.78 g/mL · 1.78 g/mL at 25 °C
vapor pressure
15 mm · 15 mm Hg ( 32 °C)
refractive index
20 · n20/D 1.42
storage temp.
Sealed in dry,Room Temperature
solubility
some polar solvents such as organic esters and amines: soluble
form
powder
color
White
Water Solubility
Soluble in organic esters, dimethylacetamide and amines. Insoluble in water.
Thermal Conductivity
0.126 W/ · 0.126 W/(m·K)
Stability
Stable. Incompatible with strong oxidizing agents, silica.
Cosmetics Ingredients Functions
BINDINGSKIN CONDITIONING
InChI
InChI=1S/C2H2F2/c1-2(3)4/h1H2
InChIKey
BQCIDUSAKPWEOX-UHFFFAOYSA-N
SMILES
C(F)(F)=C
Surface tension
30.3 mN/m · 30.3mN/m at 20°C
Indirect Additives used in Food Contact Substances
POLYVINYLIDENE FLUORIDE
FDA 21 CFR
177.152 · 177.1520; 177.2510; 177.2910
EPA Substance Registry System
1 · Ethene, 1,1-difluoro-, homopolymer (24937-79-9)
UNSPSC Code
41105339 · 41105339
NACRES
25 · NA.25
Symbol(GHS)
7 · GHS07
Signal word
Warning
Hazard statements
315 · H315-H319-H335
Precautionary statements
261 · P261-P305+P351+P338
PPE
95 · Eyeshields, Gloves, type N95 (US)
Hazard Codes
C,T
Safety Statements
22 · 22-24/25
WGK Germany
3 · 3
TSCA
TSCA listed
HS Code
3904698081 · 3904698081
Storage Class
11 · 11 - Combustible Solids
Hazardous Substances Data
24937 · 24937-79-9(Hazardous Substances Data)

· Vapors may cause dizziness or asphyxiation without warning, especially when in closed or confined areas.

Hazards Summary · 1 item

A central nervous system depressant and a hepatotoxin in animal studies; [ACGIH] Possible frostbite from contact with liquid; [NIOSH] Inhalation of high concentrations may cause CNS effects; [ICSC] 1,1-Difluoroethylene (UN1959) has warning of explosive polymerization; [ERG 2016]

DOT ID and Guide · 2 items

1959 116P

1959 116P

Reactive GroupHalogenated Organic Compounds
UN ClassificationUN Hazard Class: 2.1
Special Reports · 1 item

European Chemicals Bureau; IUCLID Dataset, 1,1-difluoroethylene (75-38-7) (2000 CD-ROM edition) contains information on use, toxicology, and environmental effects of this chemical as supplied to the European Union by industry.[Available from, as of October 2, 2009: http://ecb.jrc.ec.europa.eu/iuclid-datasheet/75387.pdf]

TSCA Requirements · 1 item

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Vinylidene fluoride is included on this list. Effective date 10/4/82; Sunset date: 10/4/92.

Reactivity AlertsHighly Flammable

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:

Shut off supply; if not possible and no risk to surroundings, let the fire burn itself out. In other cases extinguish with powder, carbon dioxide. In case of fire: keep cylinder cool by spraying with water. Combat fire from a sheltered position.

First Aid Measures · 3 items

Fresh air, rest.

ON FROSTBITE: rinse with plenty of water, do NOT remove clothes. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 3 items

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

General First Aid:

(General first aid procedures)

Safe StorageFireproof. Separated from incompatible materials. See Chemical Dangers. Store only if stabilized.
Firefighting Hazards · 3 items

Heating may cause violent combustion or explosion.

The gas is heavier than air and may travel along the ground; distant ignition possible, and may accumulate in low ceiling spaces causing deficiency of oxygen. As a result of flow, agitation, etc., electrostatic charges can be generated.

Vapours are uninhibited and may form polymers in the vents or flame arresters causing blockage.

Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 2 items

This chemical is a flammable gas. Poisonous gases are produced in fire including hydrogen fluoride, fluorine, and fluorides. Extinguish with CO2 or dry chemical to allow access to valves to shut off supply if necessary. Do not extinguish the fire unless the flow of gas can be stopped and any remaining gas is out of the line. Specially trained personnel may use fog lines to cool exposures and let the fire burn itself out. Vapors are heavier than air and will collect in low areas. Vapors may travel long distances to ignition sources and flashback. Vapors in confined areas may explode when exposed to fire. Containers may explode in fire. Storage containers and parts of containers may rocket great distances, in many directions. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors or shows any signs of deforming), withdraw immediately to a secure position. If cylinders are exposed to excessive heat from fire or flame contact, withdraw immediately to a secure location.

Stop flow of gas.

Storage Conditions · 1 item

Store gas cylinders in a cool, dry place and use the safety precautions necessary with all compressed gases. High concentrations cause a deficiency of oxygen with the risk of unconsciousness or death. Check oxygen content is at least 19% before entering storage or spill area. Store in tightly closed containers in a cool, well-ventilated area away from heat. Sources of ignition, such as smoking and open flames, are prohibited where this chemical is used, handled, or stored in a manner that could create a potential fire or explosion hazard. Use only nonsparking tools and equipment, expecially when opening and closing containers of this chemical ... A regulated, marked area should be established there this chemical is handled, used, or stored ...

Cleanup MethodsEvacuate danger area! Consult an expert! Ventilation. NEVER direct water jet on liquid.
Nonfire Spill ResponseExcerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Toxicology

Target Organscentral nervous system
Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 32(SRC), determined from a structure estimation method(2), indicates that 1,1-difluoroethene is expected to have very high mobility in soil(SRC). Volatilization of 1,1-difluoroethene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.4 atm-cu m/mole(SRC), based upon its vapor pressure, 3X10+4 mm Hg(3), and water solubility, 169 mg/L(4). 1,1-Difluoroethene is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Highly chlorinated/fluorinated compounds are not expected to biodegrade rapidly(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 32(SRC), determined from a structure estimation method(2), indicates that 1,1-difluoroethene is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 0.4 atm-cu m/mole(SRC), derived from its vapor pressure, 3X10+4 mm Hg(4), and water solubility, 169 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2.3 hours and 3.2 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow of 1.24(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important environmental fate process since this compound lacks functional groups that hydrolyze under environmental conditions(3). Highly chlorinated/fluorinated compounds are not expected to biodegrade rapidly(9).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1,1-difluoroethene, which has a vapor pressure of 3X10+4 mm Hg at 25 °C(2), is expected to exist solely as a gas in the ambient atmosphere. Gas-phase 1,1-difluoroethene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 8 days(SRC), calculated from its rate constant of 2.1X10-12 cu cm/molecule-sec at 25 °C(3). Gas-phase 1,1-difluoroethene is also degraded in the atmosphere by reaction with ozone(SRC); the half-life for this reaction in air is estimated to be 57 days(SRC), calculated from its rate constant of 2.0X10-19 cu cm/molecule-sec at 25 °C(4). 1,1-Difluoroethene does not contain chromophores that absorb at wavelengths >290 nm(5) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Exposure Routes · 2 items

The substance can be absorbed into the body by inhalation.

inhalation, skin and/or eye contact (liquid)

Signs and Symptoms · 2 items

ON CONTACT WITH LIQUID: FROSTBITE.

dizziness, headache, nausea; liquid: frostbite

Ongoing Test Status · 1 item

The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical.[Available from: http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=75-38-7]

Effluent Concentrations1,1-Difluoroethene has been detected in stack emissions from waste incinerators (concentrations or collection sites not reported)(1).
Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc of 1,1-difluoroethene can be estimated to be 32(SRC). According to a classification scheme(2), this estimated Koc value suggests that 1,1-difluoroethene is expected to have very high mobility in soil.

TSCA Test Submissions · 1 item

Acute inhalation toxicity was evaluated in groups of male and female Charles River CD rats (5/sex/concn level) exposed to 1,1-difluoroethylene at a concentration of 800,000 ppm (80% v/v) in a glass inhalation exposure chamber for 6 hrs. All animals exhibited signs of deep, rapid, labored breathing and lethargy after termination of one hour of exposure. 7 of the 10 animals died after 4 1/2 hrs of exposure. After 6 hrs of exposure, only 3 females had survived. One hour after termination of exposure, the survivors appeared normal and exhibited no other signs of toxicity during the 14 day observation period. Gross necropsy of the animals which died during exposure revealed dark red areas in all lobes of the lungs. The liver of all 7 deceased animals showed pale areas, and one male rat had pale kidneys. All other tissues appeared normal. The three surviving female rats also showed dark red areas in all lobes of the lungs.

Human Toxicity Excerpts/SIGNS AND SYMPTOMS/ Vinylidene fluoride is considered toxic by inhalation ... Irritating to skin and pulmonary tract ... Contact with the liquid can cause frostbite.
Artificial Pollution Sources1,1-Difluoroethene's production and use as a monomer in the synthesis of poly(vinylidene fluoride)(1) may result in its release to the environment through various waste streams(SRC).
Environmental BiodegradationHighly chlorinated/fluorinated compounds are not expected to biodegrade rapidly(1).

Regulatory information

TSCA Requirements · 1 item

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Vinylidene fluoride is included on this list. Effective date 10/4/82; Sunset date: 10/4/92.

DHS Chemicals of Interest (COI) · 4 items

Vinylidene fluoride

1

10000

Flammable chemical that can be released at a facility.

Safety data

PPE
Eyeshields, Gloves, type N95 (US)
wgk
3
tsca
TSCA listed
hs_code
3904698081
Signal word
Warning
Symbol(GHS)
GHS07
hazard_code
C,T
safety_code
22-24/25
Storage Class
11 - Combustible Solids
Hazard statements
H315-H319-H335
Precautionary statements
P261-P305+P351+P338
Hazardous Substances Data
24937-79-9(Hazardous Substances Data)

A physiological model was developed to describe the uptake of vinylidene fluoride in male F344/N rats exposed /to the cmpd/ for 6 hr at a concentrations ranging from 27 to 16,000 ppm in a nose only exposure system. The steady state concn of vinylidene fluoride in blood increased linearly with increases in the exposure concn. ... Rise to steady state concentrations was rapid, occurring within 15 min. Rapid decreases following the end of exposures were also noted. Vinylidene fluoride had very limited solubility in tissues with varying lipid and aqueous content. Predictions based on the model developed indicate that while the total amount of /cmpd/ metabolized increased with increasing exposure concn, this increase was not linearly related to exposure concn. Even though the blood levels of vinylidene fluoride increased linearly with increasing concn, the amount of vinylidene fluoride metabolized per 6 hr exposure approached a maximum at about 2000 ppm.

Defluorination and cytochrome p450 loss induced by fluoroethenes and fluorochloroethenes were studied in vitro. Hepatic microsomes were isolated from male Sprague-Dawley rats, some of which had been pretreated with sodium phenobarbital or beta-naphthoflavone. These were incubated with 1,1-difluoroethene, 2-chloro-1,1-difluoroethene, trifluoroethene or trifluorochloroethene. The effects of structure on fluoride release and cytochrome p450 and heme loss were investigated. Near maximal release of fluoride occurred in microsomes from phenobarbital treated rats. The greatest release occurred with 2-chloro-1,1-difluoroethene, followed by trifluorochloroethene, trifluoroethene and 1,1-difluoroethene in that order. The amounts of fluoride released were 2.4 to 4 times that released from untreated microsomes. beta-Naphthoflavone caused a slight inhibition of fluoride release from all compounds, relative to microsomes from untreated rats. Trifluoroethene caused the greatest loss of cytochrome and heme from microsomes, followed by 2-chloro-1,1-difluoroethene, trifluoroethene, and 1,1-difluoroethene in that order. /Results indicate/ that fluoroethenes and chloroethenes are cytochrome p450 substrates that effectively inactivate cytochrome p450 isozymes. The ability to undergo these reactions, however, depends on the degree and nature of their halogen substituents.

Uses & manufacturing

Uses · 4 items

Used in the production of polyvinylidene fluoride polymers and elastomers; [HSDB]

Plastic Composites Manufacturing [Category: Industry]

Manufacture of polymers and copolymers; chemical intermediate

Used for the mfg of poly(vinylidene fluoride) and for copolymerization with many fluorinated monomers. One commercially significant use is the mfg of high performance fluoroelastomers that include copolymers of 1,1-difluorothene with hexafluoropropylene (HFP) or chlorotrifluoroethylene (CTFE) and terpolymers with HFP and tetrafluoroethylene

ImpuritiesOxygen, 0.05 mol% max; other impurities, 0.2 mol% max and moisture, 0.01 mol% max...other impurities present are vinyl fluoride, difluoromethane, 1,1-difluoroethane, 1,1-difluoro-1-chloroethane and 1,1,1-trifluoroethane
U.S. Production · 4 items

2023: 25,000,000 - <40,000,000 lb

Ethene, 1,1-difluoro- is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#5267]

Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: Ethene, 1,1-difluoro-. Aggregated National Production Volume: 10 to <50 million pounds.

Consumption PatternsConsumption of poly(vinylidene fluoride) /the polymer made from 1,1- difluoroethene/ has grown from zero in 1960 to about 6200 metric tons in 1991
Industry UsesMonomers
Methods of Manufacturing · 2 items

Currently, three basic methods are used for the commercial production: (1) dechlorination of 1,2-dichloro-1,1-difluoroethane in the gas phase and on a metal catalyst, (2) dechlorination of 1-chloro-1,1-difluoroethane, and (3) dehydrofluorination of 1,1,1-trifluoroethane.

Thermal elimination of HCl from 1-chloro-1,1-difluoroethane is the principal industrial route...dehydrohalogenation of 1-bromo-1,1-difluoroethane or 1,1,1-trifluoroethane, or dehalogenation of 1,2-dichloro-1,1-difluoroethane are alternative routes; it can also be continuously prepared by the pyrolysis of trifluoromethane in the presence of a catalyst and either methane or ethylene.

Formulations/Preparations · 3 items

GRADE: 99% min purity

Genetron 1132A

The commercial product is typically 99.75 mol% min pure

General Manufacturing Information · 3 items

All Other Basic Organic Chemical Manufacturing

Ethene, 1,1-difluoro-: ACTIVE

Applications: insulation for high-temp wire, tank linings, chemical tanks and tubing, protective paints and coatings with exceptional resistance (30 yr) to weathering and uv; value and impeller parts; shrinkage tubing to encapsulate resistors, diodes and soldered joints; sealant. /Polyvinylidene fluoride/

Applications · 4 items

UsesPoly(vinylidene fluoride) is resistant to most acids and alkalies but it is attacked by fuming sulfuric acid. It is soluble in dimethylacetamide but is insoluble in less polar solvents. Copolymers have been produced with ethylene, tetrafluoroethylene, chlorotrifluoroethylene and hexafluoroethylene. The latter is an elastomer called Viton or Fluorel. The homopolymer is used as a chemical resistant coating for steel, for tank linings, hose, and pump impellors. The elastomeric copolymer with hexafluoroethylene when cured with hexamethylenediamine is used as a seal, gasket, 0-ring, tubing, coating and lining.

UsesPoly(vinylidene fluoride) is useful in coatings, film, filter cloth, instrument linings, filtration membranes, pump parts, linings and valves. It is also employed as a material for transducers in devices such as headphones, microphones and sonic detectors. It is also essential for piezoelectric and electrostrictive applications. In addition, it is useful for monofilament fishing lines replacing nylon monofilament. It acts as a standard binder used in the production of composite electrodes for lithium ion batteries. It serves as a high grade insulator for wires, nanomaterials and pressure sensors. It is utilized to make filters which are used to prepare samples for high performance liquid chromatography and other advanced analytical techniques.

UsesCoatings, film, filter cloth, instrument linings, filtration membranes, pump parts and linings and valves.

General DescriptionPoly(vinylidene fluoride) PVDF is a semi crystalline non-centrosymmetric polymer which exhibits piezo-, pyro- and ferroelectric properties. It is a linear polymer that shows permanent electric dipoles perpendicular to the direction of the molecular chain. These dipoles result from the difference in electronegativity between the atoms of hydrogen and fluorine with respect to carbon. Depending on the processing conditions, PVDF exhibits several different crystalline phases (α,β,γ,δ). The β phase of PVDF is the phase that exhibits the best ferroelectric and piezoelectric properties.

Upstream & downstream products

Upstream raw materials

Pentadecafluorooctanoic acid

Downstream products

polytetrafluoroethylene fluoroethylene polymer electret

Additional notes

DefinitionChEBI: A polymer composed of repeating 1,1-difluoroethyl units.