StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.1
  1. Startseite
  2. /Verbindung

2,4,4-Trimethyl-2-pentene

HCID 7869
Neue Reaktion
Drucken

Daten werden ergänzt – lade die Seite später neu, um den aktuellen Stand zu sehen

GrundinformationenNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
107-40-4
Standard-SMILES
CC(C)=CC(C)(C)C
InChIKey
LAAVYEUJEMRIGF-UHFFFAOYSA-N
Summenformel
C8H16
Durchschnittliche Molmasse
112,21 g/mol
Monoisotopische Masse
112,12520051

Namen und Bezeichner

Bevorzugter Name
2,4,4-Trimethyl-2-pentene
IUPAC
2,4,4-trimethylpent-2-ene
Englischer Name
2,4,4-Trimethyl-2-pentene
Summenformel
C8H16
Molmasse
112.21

Namen und Synonyme

2,4,4-TRIMETHYL-2-PENTENE107-40-42-Pentene, 2,4,4-trimethyl-2,2,4-Trimethyl-3-pentenebeta-Diisobutylene2,4,4-Trimethylpentene-2DTXSID9026766548R0DU21IDTXCID206766RefChem:1059567203-488-52,4,4-Trimethylpent-2-ene
Weitere Namen anzeigen
MFCD00008902Propene, 1-tert-butyl-2-methyl-HSDB 5377UNII-548R0DU21IEINECS 203-488-5AI3-16047.BETA.-DIISOBUTYLENESCHEMBL648959

Datenbank-Bezeichner

CAS
107-40-4
PubChem CID
7869
DTXSID
DTXSID9026766
ChEMBL
CHEMBL3187575
UNII
548R0DU21I
EC Number
203-488-5
Nikkaji
J3.613G

Eigenschaften

Berechnete StruktureigenschaftenWird ergänzt

XLogP
3,6
Polarare Oberfläche (TPSA)
0 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
0
Frei drehbare Bindungen
1
Schwere Atome
8
Formalladung
0
Komplexität
87,1

Experimentelle und physikochemische Eigenschaften

Chemical ClassesOther Classes -> Aliphatics, Unsaturated
SpringerMaterials PropertiesBoiling point
Density · 2 Einträge

0.7218 @ 20 °C/4 °C

Relative density (water = 1): 0.72

Viscosity2.7903 Pa.s @ 166.84 K
Color/FormColorless liquid
Solubility · 2 Einträge

Insoluble in water; soluble in ethyl ether, benzene, chloroform.

Solubility in water: none

Flash Point · 3 Einträge

1.7 °C

35 °F (2 °C) (OPEN CUP)

1.7 °C o.c.

Boiling Point · 2 Einträge

104.9 °C

104 °C

Melting Point · 2 Einträge

-106.3 °C

-106 °C

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 6 Einträge

Danger

H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P273, P280, P301+P316, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P331, P332+P317, P337+P317, P362+P364, P370+P378, P391, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 215 reports by companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

H225: Highly Flammable liquid and vapor [Danger Flammable liquids]

Gefahrenhinweise

Regulatory Information · 2 Einträge

Chemical: 2-Pentene, 2,4,4-trimethyl-

2-Pentene, 2,4,4-trimethyl-: Does not have an individual approval but may be used under an appropriate group standard

Fire HazardsHighly flammable. Vapour/air mixtures are explosive.
Fire PotentialFLAMMABLE, DANGEROUS FIRE RISK.
Hazards SummaryA skin irritant; May cause CNS effects; [ICSC] An irritant; [MSDSonline]
UN ClassificationUN Hazard Class: 3; UN Pack Group: II
Chemical DangersReacts with oxidants.
Physical DangersThe vapour is heavier than air and may travel along the ground; distant ignition possible.
NFPA Hazard Classification

Chemie und Industrie

Verwendung und Herstellung

Uses · 5 Einträge

Used for organic synthesis; A constituent of gasoline; [HSDB]

Petroleum Production and Refining [Category: Industry]

Organic synthesis

CHEM INT FOR ISOOCTANE FUEL (FORMER USE)

Constituent of gasoline

U.S. Production(1982) 2.4X10+10 G (EST CONSUMPTION, DIB MIXT)
Methods of ManufacturingEXTRACTION OF ISOBUTYLENE WITH SULFURIC ACID FOLLOWED BY HEATING OF EXTRACT TO RELEASE ISOMERIC DIISOBUTYLENES (DIB MIXT); BY-PRODUCT IN THE MFR OF METHYL TERT-BUTYL ETHER & BUTADIENE
Formulations/PreparationsGrade: 95%.
General Manufacturing Information · 6 Einträge

2-Pentene, 2,4,4-trimethyl-: ACTIVE

A group of isomers of the formula C8-H16, of which 2,4,4-trimethylpentene-1 & 2,4,4-trimethylpentene-2 are the most important since they are formed in appreciable amt when isobutene (isobutylene) is polymerized. /Diisobutylene/

ACETYLATED DIISOBUTYLENE WAS PREPARED BY HEATING 30 G DIISOBUTYLENE (CONTAINING 80% 2,4,4-TRIMETHYL-1-PENTENE & 20% 2,4,4-TRIMETHYL-2-PENTENE), 41 G AC2O, & 6 G CATION EXCHANGER KU-23 @ APPROX 60 °C FOR APPROX 5 HR. ACETYLATED DIISOBUTYLENE MAY BE USED IN PERFUMERY.

Alkylation, intermediates, antioxidants, surfactants, lube additives, plasticizers, & rubber chemicals. /Diisobutylene - including 2,4,4-trimethyl-2-pentene isomer/

CHEM INT FOR OCTYLPHENOL, EG, FOR SURFACTANTS-AS DIB MIXT

For more General Manufacturing Information (Complete) data for 2,4,4-TRIMETHYL-2-PENTENE (8 total), please visit the HSDB record page.

Zugehörige Reaktionen

3
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 903400
HRID 903400als Eduktuspto-grants-1980_10
Reaktionsgleichung von HRID 1449372
HRID 1449372als Eduktuspto-grants-1980_02
Reaktionsgleichung von HRID 1680910
HRID 1680910als Eduktuspto-grants-1981_06

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
Vapor Density · 2 Einträge

3.8 (AIR= 1)

Relative vapor density (air = 1): 3.9

Vapor Pressure · 3 Einträge

35.9 [mmHg]

35.9 mm Hg @ 25 °C

Vapor pressure, kPa at 38 °C: 11.02

Surface Tension3.3078X10-2 @ 166.8 K

Physikochemische Eigenschaften

Schmelzpunkt
-106.3 °C · -106.3 °C
Siedepunkt
104.9 °C · 104.9 °C
Dichte
0.7218 g/cm3 · 0.7218 g/cm3
· 3 Einträge

2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury.

3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions.

0 - Materials that in themselves are normally stable, even under fire conditions.

Hazard Classes and Categories · 2 Einträge

Flam. Liq. 2 (100%)

Flammable liquids - Category 2

Shipment Methods and Regulations · 2 Einträge

No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./

The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article.

Skin, Eye, and Respiratory IrritationsIRRITANT & /CNS DEPRESSANT/ IN HIGH CONCN.
Critical Temperature and PressureCritical temperature: 555 K; critical pressure: 2.68X10+6 Pa

Sicherheit und Schutzausrüstung

Fire FightingUse powder, AFFF, foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
First Aid Measures · 4 Einträge

Fresh air, rest. Artificial respiration may be needed. Refer for medical attention.

First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Do NOT induce vomiting.

Safe StorageFireproof. Separated from oxidants. Cool.
Fire Fighting ProceduresWATER MAY BE INEFFECTIVE.
Disposal Methods · 1 Eintrag

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Spillage Disposal · 1 Eintrag

Evacuate danger area! Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.

Preventive Measures · 1 Eintrag

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

Eye PreventionWear safety spectacles.
Fire PreventionNO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Do NOT use compressed air for filling, discharging, or handling. Use non-sparking handtools.
Inhalation RiskNo indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20 °C.
Skin PreventionProtective gloves.
Exposure PreventionPREVENT GENERATION OF MISTS!

Toxikologische Informationen

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 276(SRC), determined from a structure estimation method(2), indicates that 2,2,4-trimethyl-2-pentene is expected to have moderate mobility in soil(SRC). Volatilization of 2,2,4-trimethyl-2-pentene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.881 atm-cu m/mole(SRC), using a fragment constant estimation method(3). The potential for volatilization of 2,2,4-trimethyel-2-pentene from dry soil surfaces may exist(SRC) based upon a vapor pressure of 35.9 mm Hg(4). On exposure of 2,4,4-trimethyl-2-pentene to activated sludge in the Warburg respirometer test using oxygen uptake as a measure of oxidation, a theoretical oxygen demand for 6,12, and 24 hour exposures was 0.4%, 0.3%, and 0.7%, respectively suggesting that biodegradation in soil and water is expected to be slow(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 276(SRC), determined from a structure estimation method(2), indicates that 2,2,4-trimethyl-2-pentene is expected to slightly adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is expected to occur rapidly(3) based upon an estimated Henry's Law constant of 0.881 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Volatilization half-lives for a model river and model lake are 3.1 and 101 hrs, respectively(SRC), using an estimation method(3). On exposure of 2,4,4-trimethyl-2-pentene to activated sludge in the Warburg respirometer test using oxygen uptake as a measure of oxidation, a theoretical oxygen demand for 6,12, and 24 hour exposures was 0.4%, 0.3%, and 0.7%, respectively suggesting that biodegradation in soil and water is expected to be slow(5). According to a classification scheme(4), an estimated BCF of 240(3,SRC), from an estimated log Kow of 4.0(6,SRC), suggests the potential for bioconcentration in aquatic organisms is high.

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2,2,4-triemthyl-2-pentene, which has a vapor pressure of 35.9 mm Hg at 25 °C(2), is expected to exist solely in the vapor phase in the ambient atmosphere. Vapor-phase 2,2,4-triemthyl-2-pentene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 4.4 hrs(SRC), calculated from its estimated rate constant of 8.77X10-11 cu cm/molecule-sec at 25 °C(SRC)determined using a structure estimation method(3). The second-order rate constant for the vapor-phase reaction of 2,2,4-trimethyl-2-pentene with photochemically-produced ozone is 1.39X10-16 cu cm/molecule sec at 296.6 K; the half-life for this reaction is 2 hours(4). Reaction of vapor-phase 2,2,4-trimethyl-2-pentene with nitrate radical may be an important night-time loss process based on its molecular structure(5).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Exposure RoutesThe substance can be absorbed into the body by inhalation and by ingestion.
Signs and Symptoms · 3 Einträge

Drowsiness. Headache. Nausea.

Redness.

Abdominal pain. Vomiting.

Effluent Concentrations · 1 Eintrag

2,2,4-Trimethyl-2-pentene is reported to be 0.011% by composition of industrial average gasoline(1). In a study of alternative fuels, 2,4,4-trimethyl-2-pentene was detected at 88 ppm in undiluted exhaust samples from the use of 100% diisobutylene fuel(2). In a mixture of 19.7% diisobutylene and 80.3% gasoline fuel, 2,4,4-trimethyl-2-pentene was detected at 20 ppm in undiluted exhaust samples(2).

Soil Adsorption/Mobility · 1 Eintrag

Using a structure estimation method based on molecular connectivity indices(1), the Koc for 2,2,4-trimethyl-2-pentene can be estimated to be about 276(SRC). According to a classification scheme(2), this estimated Koc value suggests that 2,2,4-trimethyl-2-pentene is expected to have moderate mobility in soil.

Atmospheric ConcentrationsURBAN/SUBURBAN: 2,2,4-Trimethyl-2-pentene has been reported as emanating from motor vehicles in either exhaust, blowby or fuel evaporation, concentration not specified(1).
Human Toxicity ExcerptsIRRITANT & /CNS DEPRESSANT/ IN HIGH CONCN.
Artificial Pollution Sources2,2,4-Trimethyl-2-pentene's production and use in diisobutylene(1) and in gasoline products(2,3) may result in its release to the environment through various waste streams(SRC).
Environmental Biodegradation · 1 Eintrag

AEROBIC: On exposure of 2,4,4-trimethyl-2-pentene to activated sludge in the Warburg respirometer test using oxygen uptake as a measure of oxidation, a theoretical oxygen demand for 6,12, and 24 hour exposures was 0.4%, 0.3%, and 0.7%, respectively suggesting that biodegradation in soil and water is expected to be slow(1).

Environmental Bioconcentration · 1 Eintrag

An estimated BCF of 240 was calculated for 2,2,4-trimethyl-2-pentene(SRC), using an estimated log Kow of 4.0(1,SRC) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high.

Volatilization from Water/Soil · 1 Eintrag

The Henry's Law constant for 2,2,4-trimethyl-2-pentene is estimated as 0.881 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that 2,2,4-trimethyl-2-pentene is expected to volatilize rapidly from water surfaces(2). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(2) is estimated as 3.1 hrs(SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(2) is estimated as 101 hrs(SRC). 2,2,4-Trimethyl-2-pentene's Henry's Law constant(1) indicates that volatilization from moist soil surfaces may occur(SRC). The potential for volatilization of 2,2,4-trimethyl-2-pentene from dry soil surfaces may exist(SRC) based upon a vapor pressure of 35.9 mm Hg(3).

Sicherheitsdaten

Alarmwort
Achtung
Gefahrenhinweise
Code Gefahrenhinweise Gefahrenklasse Abteilung Alarmwort Symbol P-Code H225