StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → 4-(3-Butenyl)benzonitrile

HRID 1374086
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1374086
[Mg].Br[CH2:3][CH2:4][CH:5]=[CH2:6].Br[C:8]1[CH:15]=[CH:14][C:11]([C:12]#[N:13])=[CH:10][CH:9]=1.Cl>C1COCC1.[Zn+2].[Br-].[Br-].C1C=CC([P]([Pd]([P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)([P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)[P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.C1(C)C=CC=CC=1>[CH2:3]([C:8]1[CH:15]=[CH:14][C:11]([C:12]#[N:13])=[CH:10][CH:9]=1)[CH2:4][CH:5]=[CH2:6]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

9

Edukt 4

HCID 313Hydrochloric AcidHCID 12162Benzonitrile, 4-bromo-HCID 21241Homoallyl bromideHCID 5462224Magnesium

Produkt 1

HCID 117448814-(3-Butenyl)benzonitrileAusbeute 80,7 %

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 10421208
Zinc bromide
Katalysator
2×
HCID 178418397HCID 178418397, VerbindungKatalysator
HCID 1140TolueneLösungsmittel
HCID 8028TetrahydrofuranLösungsmittel3×

Reaktionsbedingungen

Temperatur
50 °C

Versuchsvorschrift

Magnesium (4.2 g, 173 mmol) was activated by washing with dilute HCl, water and acetone and was then dried in vacuo. ZnBr2 (37 g, 165 mmol) was sublimed under reduced pressure (approx. 5–20 mmHg) by gentle heating in a glovebox. The glovebox was used as it was extremely humid in the lab. Mg and ZnBr2 were mixed in a dry 3-necked flask under N2 and dry THF (30 mL) was added. 4-Bromo-1-butene (25.1 g, 186 mmol) dissolved in dry THF (175 mL) was added dropwise to the Mg/ZnBr2 slurry and, during the addition, the reaction mixture turned greyish and then black. Some heat was also evolved (>40° C.). After complete addition, the mixture was heated to 50° C. overnight. 4-Bromobenzonitrile (30.5 g, 167 mmol) was co-evaporated with toluene twice and was then dissolved in dry THF (250 ml) together with Pd(PPh3)4 (5 g, 4.3 mmol, 2.5 mole). The slurry was added to the Grignard reagent and the reaction mixture was stirred at room temperature overnight. HCl (500 mL, 3 M) was added dropwise to the reaction mixture, and the resulting solution was extracted with ether (1000+3×500 mL), the combined ether solutions were washed with NaHCO3 (satd. 3×250 mL), dried, filtered and evaporated. The crude product (29.7 g) was subjected to Dry-Flash chromatography (diameter 12 cm, height 5 cm, heptane:EtOAc (99:1 to 90:10)) to give 21.2 g of the sub-title compound contaminated with 4-bromobenzonitrile (about 20%). This material was used in the next step.

Aufarbeitung

  1. washby washing with dilute HCl, water and acetone
  2. customwas then dried in vacuo
  3. temperatureby gentle heating in a glovebox
  4. custom(>40° C.)
  5. additionAfter complete addition
  6. extractionthe resulting solution was extracted with ether (1000+3×500 mL)
  7. washthe combined ether solutions were washed with NaHCO3 (satd. 3×250 mL)
  8. customdried
  9. filtrationfiltered
  10. customevaporated

Quellen und Nachweise

ORD-Eintrag
ord-ae75eba0735c44c8a3412847469d498f
Quelldatensatz
uspto-grants-2007_01
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07164017B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion