StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Water → 1-[N-[(1,3-benzodioxol-5-yl)sulfonyl]-N-(2-methylpropyl)amino]-3(S)-amino-4-phenyl-2(R)-butanol.methanesulfonic acid

HRID 1391971
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1391971
[O:1]1[C:5]2[CH:6]=[CH:7][C:8]([S:10]([N:13]([CH2:18][C@@H:19]([OH:43])[C@@H:20]([N:28](CC3C=CC=CC=3)CC3C=CC=CC=3)[CH2:21][C:22]3[CH:27]=[CH:26][CH:25]=[CH:24][CH:23]=3)[CH2:14][CH:15]([CH3:17])[CH3:16])(=[O:12])=[O:11])=[CH:9][C:4]=2[O:3][CH2:2]1.O.[CH3:45][S:46]([OH:49])(=[O:48])=[O:47]>[OH-].[OH-].[Pd+2].C1COCC1>[CH3:45][S:46]([OH:49])(=[O:48])=[O:47].[O:1]1[C:5]2[CH:6]=[CH:7][C:8]([S:10]([N:13]([CH2:18][C@@H:19]([OH:43])[C@@H:20]([NH2:28])[CH2:21][C:22]3[CH:23]=[CH:24][CH:25]=[CH:26][CH:27]=3)[CH2:14][CH:15]([CH3:17])[CH3:16])(=[O:11])=[O:12])=[CH:9][C:4]=2[O:3][CH2:2]1
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 3

HCID 962Water2×HCID 6395Methanesulfonic AcidHCID 113878411[n-[(1,3-Benzodioxol-5-yl)sulfonyl]-n-(2-methylpropyl)amino]-3(s)-[bis(phenylmethyl)amino]-4-phenyl-2(r)-butanol

Produkt 1

HCID 866009761-[N-[(1,3-benzodioxol-5-yl)sulfonyl]-N-(2-methylpropyl)amino]-3(S)-amino-4-phenyl-2(R)-butanol.methanesulfonic acid

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 9942167
Palladium hydroxide
Katalysator
HCID 8028TetrahydrofuranLösungsmittel2×

Versuchsvorschrift

Part B: To the THF solution of crude 1-(N-[(1,3-benzodioxol-5-yl)sulfonyl]-N-(2-methylpropyl)amino]-3(S)-[bis(phenylmethyl)amino]-4-phenyl-2(R)-butanol was added water (500 mL) followed by methane sulfonic acid (531 g, 5.5 moles). The solution was stirred to insure complete mixing and added to a 5 gallon autoclave. Pearlman's catalyst (200 g of 20% Pd(OH)2 on C/50% water) was added to the autoclave with the aid of THF (500 mL). The reactor was purged four times with nitrogen and four times with hydrogen. The reactor was charged with 60 psig of hydrogen and stirring at 450 rpm started. After 16 hours, HPLC analysis indicated that a small amount of the mono-benzyl intermediate was still present. Additional catalyst (50 g) was added and the reaction was allowed to run overnight. The solution was then filtered through celite (500 g) to remove the catalyst and concentrated under vacuum in five portions. To each portion, toluene (500 mL) was added and removed under vacuum to allotropically removed residual water. The resulting solid was divided into three portions and each washed with methyl t-butyl ether (2 L) and filtered. The residual solvent was removed at room temperature in a vacuum oven at less than 1 torr to yield the 2714 g of the expected salt.

Aufarbeitung

  1. additionto insure complete mixing
  2. additionadded to a 5 gallon autoclave
  3. customThe reactor was purged four times with nitrogen and four times with hydrogen
  4. additionThe reactor was charged with 60 psig of hydrogen
  5. stirringstirring at 450 rpm
  6. additionAdditional catalyst (50 g) was added
  7. waitto run overnight
  8. filtrationThe solution was then filtered through celite (500 g)
  9. customto remove the catalyst
  10. concentrationconcentrated under vacuum in five portions
  11. additionTo each portion, toluene (500 mL) was added
  12. customremoved under vacuum to allotropically removed residual water
  13. washeach washed with methyl t-butyl ether (2 L)
  14. filtrationfiltered
  15. customThe residual solvent was removed at room temperature in a vacuum oven at less than 1 torr

Quellen und Nachweise

ORD-Eintrag
ord-13318ec3e7ef4de796ae4c8ba13f717e
Quelldatensatz
uspto-grants-2008_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07339078B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion