StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

2,4,4-Trimethyl-1-pentene → Octyldiphenylamine

HRID 1532802
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1532802
[C:1]1([NH:7][C:8]2[CH:13]=[CH:12][CH:11]=[CH:10][CH:9]=2)[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.C[C:15]([CH2:17][C:18]([CH3:21])(C)C)=[CH2:16].[CH3:22][C:23](=C)[CH3:24]>>[CH2:22]([N:7]([C:1]1[CH:2]=[CH:3][CH:4]=[CH:5][CH:6]=1)[C:8]1[CH:9]=[CH:10][CH:11]=[CH:12][CH:13]=1)[CH2:23][CH2:24][CH2:21][CH2:18][CH2:17][CH2:15][CH3:16]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 3

HCID 78682,4,4-Trimethyl-1-pentene3×HCID 8255Isobutylene2×HCID 11487Diphenylamine2×

Produkt 1

HCID 66575Octyldiphenylamine

Reaktionsbedingungen

Temperatur
160 °C

Versuchsvorschrift

In a 50 gallon (about 189 L) reactor, 144 pounds (about 65.5 kg) of diphenylamine and 5.9 pounds (about 2.7 kg) of Filtrol™ clay (Engelhard Corp., Iselin, N.J.) were mixed in a reactor and heated to 160° C. for 20 minutes to drive off moisture. About 124.3 pounds (about 56.5 kg) of diisobutylene at room temperature was then added to the reactor at a rate of about 60 pounds (about 27 kg) per minute. The reaction temperature dropped to 140° C. and then climbed back to an initial set point temperature of 160° C. Within about 10 minutes of first adding the diisobutylene, 37.4 pounds (about 17 kg) of isobutylene was charged in the reactor over one hour. The temperature during this period reached a maximum of about 190° C. due to the exothermic nature of the reaction. Based on experience and Examples illustrated in U.S. Pat. No. 5,750,787, it is believed that the initiation of the addition of isobutylene occurred before the reactive composition of diisobutylene and diphenylamine formed at least 50 wt. % monooctyldiphenylamine.

Aufarbeitung

  1. additionThe reaction temperature dropped to 140° C.
  2. customset point temperature of 160° C
  3. additionwas charged in the reactor over one hour
  4. waitThe temperature during this period reached
  5. customa maximum of about 190° C. due to the exothermic nature of the reaction

Quellen und Nachweise

ORD-Eintrag
ord-7ddc7457265546cf901158002619f0ca
Quelldatensatz
uspto-grants-2001_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US06204412B1

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion