StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

1,2-Dichloroethane → HCID 9794351, Verbindung

HRID 1636570
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 1636570
[CH3:1][C:2]1[S:3][C:4]([CH3:7])=[CH:5][CH:6]=1.ClC([CH:11]([CH2:16][CH3:17])[C:12]([O:14]C)=[O:13])=O.[Al+3].[Cl-].[Cl-].[Cl-].Cl.Cl[CH2:24]CCl>>[CH3:1][C:2]1[S:3][C:4]([CH3:7])=[CH:5][C:6]=1[CH2:24][CH2:17][CH2:16][CH2:11][C:12]([OH:14])=[O:13]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 5

HCID 111,2-DichloroethaneHCID 313Hydrochloric AcidHCID 125142,5-DimethylthiopheneHCID 6451240Aluminum(III) ChlorideHCID 19598050HCID 19598050, Verbindung

Produkt 1

HCID 9794351HCID 9794351, VerbindungAusbeute 86 %

Reaktionsbedingungen

Temperatur
-10 °C

Versuchsvorschrift

2,5-Dimethylthiophene (8 g, 71.4 mmol) and methyl chloroformylbutyrate (10 g, 65.8 mmol) are dissolved in 40 mL 1,2-dichloroethane. The reaction mixture is then cooled to -10° C. AlCl3 was added in portion in 15 min. The resulting mixture is stirred at 0° C. for another 1 hr., poured into ice and concentrated HCl (3:1), and extracted with dichloromethane. The organic layer is washed with 10% HCl, water and 5% sodium bicarbonate. It is then dried over sodium sulfate and the solvent evaporated under reduced pressure. The resulting yellow oil is redissolved in 60 mL triethyleneglycol with 20 mL 80% hydrazine and 20 g KOH. The reaction mixture is then heated to 140° C. for 10 min. and then to 180° C. to distill off the remaining hydrazine and water. The mixture is maintained at 205° C. overnight. After the reaction is cooled to room temperature, it is diluted with water, acidified with conc. HCl and extrated with ether. The ether layer is washed exaustively with water and dried over sodium sulfate. Evaporation of the solvent under reduced pressure yields 5-(2,5-dimethyl-3-thiophenyl)pentanoic acid as a brown oil (12 g, 86%) 1H NMR (CDCl3) 6.45 (s, 1 H), 2.50-2.10 (m, 10 H), 1.83-1.55 (m, 4 H).

Aufarbeitung

  1. extractionextracted with dichloromethane
  2. washThe organic layer is washed with 10% HCl, water and 5% sodium bicarbonate
  3. dry with materialIt is then dried over sodium sulfate
  4. customthe solvent evaporated under reduced pressure
  5. dissolutionThe resulting yellow oil is redissolved in 60 mL triethyleneglycol with 20 mL 80% hydrazine and 20 g KOH
  6. temperatureThe reaction mixture is then heated to 140° C. for 10 min.
  7. distillationto 180° C. to distill off the remaining hydrazine and water
  8. temperatureThe mixture is maintained at 205° C. overnight
  9. temperatureAfter the reaction is cooled to room temperature
  10. additionit is diluted with water
  11. washThe ether layer is washed exaustively with water
  12. dry with materialdried over sodium sulfate
  13. customEvaporation of the solvent under reduced pressure

Quellen und Nachweise

ORD-Eintrag
ord-bfaaf252542447e48f9e7599e4b39cb8
Quelldatensatz
uspto-grants-2000_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US06034252

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion