StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

1-Octene → Octene-1 7-methyl-1,6-octadiene

HRID 1707723
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1707723
[CH3:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8]CC.CCCCCCC=C.[CH3:19][C:20]([CH3:27])=[CH:21][CH2:22][CH2:23][CH2:24][CH:25]=[CH2:26].[H][H].C([Al](CC(C)C)CC(C)C)C(C)C.C[Si](C)(C)OCC>[Ti].CO.C(O)C(C)C>[CH3:8][CH2:7][CH2:6][CH2:5][CH2:4][CH2:3][CH:2]=[CH2:1].[CH3:19][C:20]([CH3:27])=[CH:21][CH2:22][CH2:23][CH2:24][CH:25]=[CH2:26]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

10

Edukt 6

HCID 81251-OcteneHCID 15600DecaneHCID 15772EthoxytrimethylsilaneHCID 5575797-Methyl-1,6-octadieneHCID 16682931TriisobutylaluminumHCID 178418361HCID 178418361, Verbindung

Produkt 1

HCID 131718731
Octene-1 7-methyl-1,6-octadiene

Reagenzien, Katalysatoren, Lösungsmittel 3

HCID 23963TitaniumKatalysatorHCID 887MethanolLösungsmittelHCID 6560IsobutanolLösungsmittel

Versuchsvorschrift

A 500 ml polymerizer equipped with an agitating element was charged with 142 ml of decane, 100 ml of octene-1 and 8 ml of 7-methyl-1,6-octadiene. Into this solution elevated in temperature to 50° C. were introduced continuously hydrogen and nitrogen at rates of 1 liter and 50 liters per hour, respectively. The polymerizer was then charged with 0.625 mmol of triisobutylaluminum, 0.21 mmol of trimethylethoxysilane and 0.0125 mmol, in terms of titanium atom, of the solid titanium catalyst component [A] to initiate polymerization. After a thirty-minute polymerization at 50° C., the polymerization was stopped by the addition of small amounts of isobutyl alcohol to the system, and the resulting polymer solution was then poured in large amounts of methanol to separate out a copolymer. The copolymer was recovered and dried at 120° C. under reduced pressure overnight to give 12.4 g of octene-1/7-methyl-1,6-octadiene copolymer. The intrinsic viscosity [η], as measured in decahydronaphthalene at 135° C., of the thus obtained copolymer was 6.4 dl/g, and the content of 7-methyl-1,6-octadiene in the copolymer was 6.6 mol %.

Aufarbeitung

  1. customA 500 ml polymerizer equipped with an agitating element
  2. customelevated in temperature to 50° C.
  3. custompolymerization
  4. customAfter a thirty-minute polymerization at 50° C.
  5. customto separate out a copolymer
  6. customThe copolymer was recovered
  7. customdried at 120° C. under reduced pressure overnight

Quellen und Nachweise

ORD-Eintrag
ord-8e0383bbbd9c4b2a96c22c1b03c389eb
Quelldatensatz
uspto-grants-1994_10
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05354828

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion