[C:1]([C:5]1[O:9][C:8]([C:10]2[C:11]([NH2:28])=[N:12][CH:13]=[C:14]([C:16]3[N:20]([CH3:21])[N:19]=[C:18]([CH:22]4[CH2:27][CH2:26][NH:25][CH2:24][CH2:23]4)[N:17]=3)[N:15]=2)=[N:7][N:6]=1)([CH3:4])([CH3:3])[CH3:2].C(N(C(C)C)C(C)C)C.[OH:38][C@H:39]([CH3:44])[CH2:40][C:41](O)=[O:42]>CN(C)C=O.C(#N)C>[NH2:28][C:11]1[N:12]=[CH:13][C:14]([C:16]2[N:20]([CH3:21])[N:19]=[C:18]([CH:22]3[CH2:23][CH2:24][N:25]([C:41](=[O:42])[CH2:40][C@H:39]([OH:38])[CH3:44])[CH2:26][CH2:27]3)[N:17]=2)=[N:15][C:10]=1[C:8]1[O:9][C:5]([C:1]([CH3:4])([CH3:2])[CH3:3])=[N:6][N:7]=12-(1H-Benzo[d][1,2,3]triazol-1-yl)-1,1,3,3-tetramethylisouronium tetrafluoroborate (201 mg, 0.63 mmol) was added to a stirred suspension of 3-(5-tert-butyl-1,3,4-oxadiazol-2-yl)-5-(1-methyl-3-(piperidin-4-yl)-1H-1,2,4-triazol-5-yl)pyrazin-2-amine (200 mg, 0.52 mmol, described in Example 1), N-ethyl-N-isopropylpropan-2-amine (0.273 mL, 1.56 mmol) and (R)-3-hydroxybutanoic acid (65.2 mg, 0.63 mmol) in N,N-dimethylformamide (3 mL). The resulting suspension was stirred at room temperature for 2 hours. The resulting mixture was purified by preparative HPLC using a Waters X-Bridge reverse-phase column (C-18, 5 microns silica, 30 mm diameter, 150 mm length, flow rate of 60 ml/minute) using an isocratic mixture of 31% acetonitrile in water (containing ammonium carbonate (2 g/L). The fractions containing the desired compound were evaporated to dryness to afford a pale yellow solid. This solid was stirred in acetonitrile (3 mL) at room temperature. The resulting solid was filtered, washed with cold acetonitrile and dried to afford the title compound (125 mg, 51.0%) as a pale yellow solid.