StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

N-Fluorobenzenesulfonimide → 2-(4-Ethyl-2-fluorophenyl)-4,4-dimethyl-4,5-dihydrooxazole

HRID 1774017
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1774017
[CH2:1]([C:3]1[CH:8]=[CH:7][C:6]([C:9]2[O:10][CH2:11][C:12]([CH3:15])([CH3:14])[N:13]=2)=[CH:5][CH:4]=1)[CH3:2].C([Li])CCC.C1C=CC(S(N(S(C2C=CC=CC=2)(=O)=O)[F:31])(=O)=O)=CC=1>C1COCC1.CCCCCC>[F:31][C:7]1[CH:8]=[C:3]([CH2:1][CH3:2])[CH:4]=[CH:5][C:6]=1[C:9]1[O:10][CH2:11][C:12]([CH3:14])([CH3:15])[N:13]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 3

HCID 588007N-FluorobenzenesulfonimideHCID 128725592-(4-Ethylphenyl)-4,4-dimethyl-2-oxazolineHCID 178418339Butyllithium

Produkt 1

HCID 450954212-(4-Ethyl-2-fluorophenyl)-4,4-dimethyl-4,5-dihydrooxazoleAusbeute 94.529,797 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 8058HexaneKatalysator
HCID 8028
Tetrahydrofuran
Lösungsmittel

Reaktionsbedingungen

Temperatur
-70 °C

Versuchsvorschrift

The 4-ethylphenyloxazoline (2.03 g, 10 mmol) was dried in a vacuum oven at 60° C. for 2-3 hours, dissolved in 50 mL of dry THF, and charged to a 300 mL round bottom flask equipped with a thermometer, nitrogen inlet, and magnetic stir bar. The mixture was cooled under nitrogen to −70° C. in a dry ice/acetone bath. Butyl lithium in hexane (7.5 mL, 0.012 mmol) was added in two portions and warmed to −25° C. over 2 hours. The mixture was cooled again to −65° C. and N-fluorobenzenesulfonimide (3.79 g, 0.012 mmol) was added in three portions. The mixture was allowed to warm to room temperature and was stirred overnight. The reaction mixture was quenched with 100 mL of saturated NH4Cl, and transferred to a separatory funnel with ethyl ether washes. 25% NaOH was added slowly and mixed until an aqueous phase with pH=10 was achieved. The aqueous phase was extracted with ether and the ether was washed with a small volume of water. The ether extracts were dried over MgSO4 and evaporated to give 2.51 g of 2-(2-fluoro-4-ethyl-phenyl)-4,4-dimethyl-4,5-dihydro-oxazole as a brown oil. In a second experiment, a rate of 70% fluorination was achieved (highest) with a reactant ratio of 1:1.5:1.5 oxazoline:BuLi:N-fluorobenzenesulfonimide. 1H NMR (300 MHz, CDCl3) δ (ppm): 7.0 (d, 2H), 7.78 (t, 1H), 4.1 (s, 2H), 2.7 (q, 2H), 1.39 (s, 6H), 1.2 (t, 3H).

Aufarbeitung

  1. additioncharged to a 300 mL round bottom flask
  2. customequipped with a thermometer, nitrogen inlet, and magnetic stir bar
  3. temperaturewarmed to −25° C. over 2 hours
  4. temperatureThe mixture was cooled again to −65° C.
  5. temperatureto warm to room temperature
  6. customThe reaction mixture was quenched with 100 mL of saturated NH4Cl
  7. customtransferred to a separatory funnel with ethyl ether washes
  8. addition25% NaOH was added slowly
  9. additionmixed until an aqueous phase with pH=10
  10. extractionThe aqueous phase was extracted with ether
  11. washthe ether was washed with a small volume of water
  12. dry with materialThe ether extracts were dried over MgSO4
  13. customevaporated

Quellen und Nachweise

ORD-Eintrag
ord-ac4f99c8bed341118d8a7f44d9d6202e
Quelldatensatz
uspto-grants-2016_02
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US09255273B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion