StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Ethyl 4-methylnicotinate → Ethyl 4-methylpiperidine-3-carboxylate

HRID 1808700
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1808700
[CH2:1]([O:3][C:4](=[O:12])[C:5]1[C:10]([CH3:11])=[CH:9][CH:8]=[N:7][CH:6]=1)[CH3:2].C(O)(=O)[C@@H]([C@H](C(O)=O)O)O>C(O)C.[Pt]=O>[CH2:1]([O:3][C:4]([CH:5]1[CH:10]([CH3:11])[CH2:9][CH2:8][NH:7][CH2:6]1)=[O:12])[CH3:2]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 2

HCID 409602Ethyl 4-methylnicotinateHCID 444305L-Tartaric acid

Produkt 1

HCID 13658603Ethyl 4-methylpiperidine-3-carboxylateAusbeute 90,5 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 82844Platinum oxide (PtO)KatalysatorHCID 702EthanolLösungsmittel

Versuchsvorschrift

A Parr bottle was charged with ethyl-4-methylnicotinoate (5.01 g, 30.32 mmol), L-(+)-tartaric acid (4.67 g, 31.2 mmoL) and platinum oxide (Adams catalyst, 827 mg). The material was taken up in absolute ethanol (100 mL) and shaken on the PARR overnight under hydrogen atmosphere (50 psi). The material was filtered through a plug of celite, and the filtrate was concentrated on the rotovap such that about 85% of the solvent was removed. The remainder was taken up in ethyl acetate (120 mL) and aqueous saturated sodium bicarbonate solution (120 mL) and shaken in a separatory funnel. The ethyl acetate phase was collected. The aqueous phase was treated with 2N sodium hydroxide solution (25 mL) and shaken with ethyl acetate (100 mL). The ethyl acetate phase was collected and the aqueous phase back extracted with ethyl acetate (100 mL). The organic phases were combined, dried (MgSO4), filtered and stripped to provide 4.7 g of (+/−)-4-methyl-piperidine-3-carboxylic acid ethyl ester as a mobile yellow oil. MS (M+H)+=172.

Aufarbeitung

  1. filtrationThe material was filtered through a plug of celite
  2. concentrationthe filtrate was concentrated on the rotovap such that about 85% of the solvent
  3. customwas removed
  4. stirringaqueous saturated sodium bicarbonate solution (120 mL) and shaken in a separatory funnel
  5. customThe ethyl acetate phase was collected
  6. additionThe aqueous phase was treated with 2N sodium hydroxide solution (25 mL)
  7. stirringshaken with ethyl acetate (100 mL)
  8. customThe ethyl acetate phase was collected
  9. extractionthe aqueous phase back extracted with ethyl acetate (100 mL)
  10. dry with materialdried (MgSO4)
  11. filtrationfiltered

Quellen und Nachweise

ORD-Eintrag
ord-5a05e3263f044802bd5214cfc29d7b3c
Quelldatensatz
uspto-grants-2013_01
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08361962B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion