StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → 2-Cyclopropyl-6-methylphenyl acetate

HRID 1866824
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 1866824
[Mg].C1COCC1.[C:7]([O:10][C:11]1[C:16]([CH3:17])=[CH:15][CH:14]=[CH:13][C:12]=1[CH:18](Br)[CH2:19][CH2:20]Br)(=[O:9])[CH3:8].Cl>O.II>[C:7]([O:10][C:11]1[C:16]([CH3:17])=[CH:15][CH:14]=[CH:13][C:12]=1[CH:18]1[CH2:20][CH2:19]1)(=[O:9])[CH3:8]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 313Hydrochloric AcidHCID 8028Tetrahydrofuran2×HCID 5462224MagnesiumHCID 119598052-(1,3-Dibromopropyl)-6-methylphenyl acetate

Produkt 1

HCID 119598072-Cyclopropyl-6-methylphenyl acetateAusbeute 113,5 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 807
Iodine
Katalysator
HCID 962WaterLösungsmittel

Versuchsvorschrift

A 500 ml four-necked round-bottomed flask was equipped with a magnetic stirrer bar, a thermometer, a reflux condenser and a drying tube. Magnesium (2.50 g, 102.8 mmol) and anhydrous THF (30 ml) were added thereto under a nitrogen atmosphere. Iodine (63 mg) was added to the mixture and the mixture was stirred at room temperature for 30 minutes. Subsequently, 2-(1,3-dibromopropyl)-6-methylphenyl acetate (30.0 g, 85.7 mmol) and anhydrous THF (90 ml) were added to the mixture at 80° C. over 15 minutes. After the mixture was stirred at 80° C. for 30 minutes, the mixture was further stirred at room temperature for 1.5 hours. 1M Hydrochloric acid (100 ml) was added dropwise to the reaction mixture such that the temperature of the reaction mixture did not exceed 40° C. The mixture was diluted with water (100 ml) and extracted with a 10% ethyl acetate-90% hexane (V/V) solvent mixture (3×200 ml). The organic layer was combined and it was successively washed with water (2×200 ml) and a saturated aqueous NaCl solution (50 ml), followed by drying with anhydrous sodium sulfate (100 g). After the solid was removed by filtration, the filtrate was concentrated to obtain 18.5 g of 2-cyclopropyl-6-methylphenyl acetate as a brown gum.

Aufarbeitung

  1. customA 500 ml four-necked round-bottomed flask was equipped with a magnetic stirrer bar
  2. stirringAfter the mixture was stirred at 80° C. for 30 minutes
  3. stirringthe mixture was further stirred at room temperature for 1.5 hours
  4. customdid not exceed 40° C
  5. extractionextracted with a 10% ethyl acetate-90% hexane (V/V) solvent mixture (3×200 ml)
  6. washit was successively washed with water (2×200 ml)
  7. dry with materialby drying with anhydrous sodium sulfate (100 g)
  8. customAfter the solid was removed by filtration
  9. concentrationthe filtrate was concentrated

Quellen und Nachweise

ORD-Eintrag
ord-2af1d2972b0447f9a79e8d1c12e8cb7a
Quelldatensatz
uspto-grants-2009_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07629494B2

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion