StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Ethyl cyanoacetate → 2-(2-Methylpropyl)butanedinitrile

HRID 1873446
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1873446
[C:1]([CH2:3][C:4](OCC)=O)#[N:2].C(=O)[CH2:10][CH:11]([CH3:13])[CH3:12].CCCCCC.[C-:21]#[N:22].[K+]>O.N1CCCCC1>[CH2:10]([CH:4]([CH2:3][C:1]#[N:2])[C:21]#[N:22])[CH:11]([CH3:13])[CH3:12]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 7764Ethyl cyanoacetateHCID 8058HexaneHCID 9032Potassium Cyanide2×HCID 115523-Methylbutanal

Produkt 1

HCID 161161282-(2-Methylpropyl)butanedinitrileAusbeute 99 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 8082
Piperidine
Katalysator
HCID 962WaterLösungsmittel2×

Versuchsvorschrift

A mixture of ethyl cyanoacetate (733 g, 6.48 mol), isovaleraldehyde (613.9 g, 7.13 mol), piperidine (5.5 g, 0.065 mol), and hexane (0.5 L) was placed under reflux with continuous removal of water. When no additional water was collected, the mixture was cooled and distilled under vacuum to remove solvent. Isopropanol (1 L) was added to the remaining oil, followed by a solution of potassium cyanide (422 g, 6.48 mol) in water (2 L). The reaction mixture was maintained below 35° C. during addition of the potassium cyanide solution and then held at approximately 35° C. for 4 h. The reaction mixture was distilled at atmospheric pressure until a temperature of 95° C. was reached and then refluxed at this temperature for 5 h. The reaction mixture was cooled, diluted with water (0.5 L) and extracted with 1 L methyl tert-butyl ether (MTBE). The MTBE extract was washed with water (0.5 L), dried over anhydrous magnesium sulfate, filtered, and concentrated under vacuum to give 873.4 g of 2-isobutyl-succinonitrile as an oil. Purified samples of 2-isobutyl-succinonitrile can be obtained by vacuum distillation (90° C. at 0.275 mm Hg).

Aufarbeitung

  1. customWhen no additional water was collected
  2. temperaturethe mixture was cooled
  3. distillationdistilled under vacuum
  4. customto remove solvent
  5. additionIsopropanol (1 L) was added to the remaining oil
  6. distillationThe reaction mixture was distilled at atmospheric pressure until a temperature of 95° C.
  7. temperaturerefluxed at this temperature for 5 h
  8. temperatureThe reaction mixture was cooled
  9. additiondiluted with water (0.5 L)
  10. extractionextracted with 1 L methyl tert-butyl ether (MTBE)
  11. extractionThe MTBE extract
  12. washwas washed with water (0.5 L)
  13. dry with materialdried over anhydrous magnesium sulfate
  14. filtrationfiltered
  15. concentrationconcentrated under vacuum

Quellen und Nachweise

ORD-Eintrag
ord-a7472d31f7fb498b997dcb8727b3fdb4
Quelldatensatz
uspto-grants-2012_11
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08304252B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion