StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Acrylic Acid → Butyl prop-2-enoate;styrene

HRID 1885022
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1885022
[Na+].[CH2:2]([C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][C:15]=1S([O-])(=O)=O)[CH2:3][CH2:4]CCCCCCCCC.[C:24]([OH:28])(=[O:27])[CH:25]=[CH2:26]>O>[CH2:3]=[CH:2][C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1.[C:24]([O:28][CH2:14][CH2:2][CH2:3][CH3:4])(=[O:27])[CH:25]=[CH2:26]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 2

HCID 6581Acrylic AcidHCID 23662403Sodium Dodecylbenzenesulfonate

Produkt 1

HCID 168422Butyl prop-2-enoate;styrene

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 962WaterLösungsmittel

Reaktionsbedingungen

Temperatur
135 °C

Versuchsvorschrift

An aqueous solution was prepared that contained dodecylbenzenesulfonic acid sodium salt (“SDBS”) (6 g), Na2S2O7 (1.42 g, 0.0059 mol), HOTEMPO (1.85 g, 0.0107 mol), acrylic acid (9 ml) and de-ionized water (1.2 L). To this was added 300 mL of the pre-polymer (prepared according to Example 1) and stirred for about 5 minutes. The mixture was then piston homogenized for one pass at about 700 BAR. The mini-emulsion was transferred to the 2 L PARR reactor and then deoxygenated by 10 pressurization/depressurization cycles with argon. The mini-emulsion was then heated to 135° C. After 1 hour at temperature, 8 ml of ascorbic acid (0.189 g/ml) was continuously added at a rate of 0.033 ml per minute over a 4-hour period. After a total of 6 hours at temperature the reaction was cooled to yield a poly(styrene/butyl acrylate) latex of Mn=13,000, Tg of ˜50C with a PD of 1.46 and particle size of ˜190 nm.

Aufarbeitung

  1. customAn aqueous solution was prepared
  2. stirringThe mixture was then piston homogenized for one pass at about 700 BAR
  3. customdeoxygenated by 10 pressurization/depressurization cycles with argon
  4. additionAfter 1 hour at temperature, 8 ml of ascorbic acid (0.189 g/ml) was continuously added at a rate of 0.033 ml per minute over a 4-hour period
  5. temperatureAfter a total of 6 hours at temperature the reaction was cooled

Quellen und Nachweise

ORD-Eintrag
ord-5240079623264951ae35b6169a21888e
Quelldatensatz
uspto-grants-2004_07
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US06767974B1

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion