C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.N(/C(OCC)=O)=N\C(OCC)=O.[Cl:32][C:33]1[C:34]([OH:40])=[CH:35][C:36](=[O:39])[NH:37][CH:38]=1.[F:41][C:42]([F:57])([F:56])[C:43]1[CH:44]=[N:45][C:46]([N:49]2[CH2:54][CH2:53][CH:52](O)[CH2:51][CH2:50]2)=[N:47][CH:48]=1>C(OCC)(=O)C.CN(C=O)C>[Cl:32][C:33]1[C:34]([O:40][CH:52]2[CH2:53][CH2:54][N:49]([C:46]3[N:45]=[CH:44][C:43]([C:42]([F:41])([F:56])[F:57])=[CH:48][N:47]=3)[CH2:50][CH2:51]2)=[CH:35][C:36](=[O:39])[NH:37][CH:38]=1To a 100 mL recovery flask under nitrogen was added triphenylphosphine (1285 mg, 4.90 mmol), DMF (10 mL), and then (E)-diethyl diazene-1,2-dicarboxylate (0.67 mL, 4.20 mmol). The mixture was stirred at room temperature for 5 minutes at which point 5-chloro-4-hydroxypyridin-2(1H)-one (509 mg, 3.50 mmol) was added. After stirring for an additional 5 minutes, 1-(5-(trifluoromethyl)pyrimidin-2-yl)piperidin-4-ol (1865 mg, 3.50 mmol) was added. The reaction was placed in a 100° C. oil bath under a nitrogen atmosphere with a vent line for two hours. The clear amber reaction mixture was cooled to room temperature and added to 600 mL of ethyl acetate. After washing the ethyl acetate with water (2×200 mL), the solvent was removed in vacuo from the slightly cloudy, pale pink solution to provide 3.06 g of a red, oily foam. This material was purified using a 65 mm id×120 mm silica gel column and eluting as follows: