StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Acrylic Acid → 3-[(alpha-Methyl-4-chlorobenzylidene amino)oxy] propionic acid

HRID 2049035
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 2049035
[OH-].[Na+].[Cl:3][C:4]1[CH:9]=[CH:8][C:7]([C:10](=[N:12][OH:13])[CH3:11])=[CH:6][CH:5]=1.[C:14]([OH:18])(=[O:17])[CH:15]=[CH2:16]>C(O)C.O>[CH3:11][C:10](=[N:12][O:13][CH2:16][CH2:15][C:14]([OH:18])=[O:17])[C:7]1[CH:6]=[CH:5][C:4]([Cl:3])=[CH:9][CH:8]=1
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 3

HCID 6581Acrylic AcidHCID 14798Sodium HydroxideHCID 96172p-Chloroacetophenone oxime

Produkt 1

HCID 544640573-[(alpha-Methyl-4-chlorobenzylidene amino)oxy] propionic acid

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 702EthanolLösungsmittelHCID 962
Water
Lösungsmittel

Versuchsvorschrift

A solution of 2.4 g of sodium hydroxide in 55 ml of 85% ethanol was mixed with 6,78 g of 4'-chloroacetophenone oxime and 2.88 g of acrylic acid. The mixture was then refluxed for 2.5 hours, subsequently diluted with 10 ml of water, and concentrated by evaporation in a vacuum after 2 hours. The residue was dissolved in 50 ml of ether and 50 ml of water, and the layers were separated. The water layer was extracted with 50 ml of ether and then acidified with 40 ml of 2 N hydrochloric acid. The acid solution was extracted with 100 ml of ether and the ethereal solution was dried over sodium sulfate. Then the solvent was distilled off and its last traces were removed together with higher boiling substances at a pressure of 0.01 mm and a temperature of 50° C. The residue was crystallized from petroleum ether. Melting point 80° C.-83° C.

Aufarbeitung

  1. temperatureThe mixture was then refluxed for 2.5 hours
  2. concentrationconcentrated by evaporation in a vacuum after 2 hours
  3. dissolutionThe residue was dissolved in 50 ml of ether
  4. custom50 ml of water, and the layers were separated
  5. extractionThe water layer was extracted with 50 ml of ether
  6. extractionThe acid solution was extracted with 100 ml of ether
  7. dry with materialthe ethereal solution was dried over sodium sulfate
  8. distillationThen the solvent was distilled off
  9. customits last traces were removed together with higher boiling substances at a pressure of 0.01 mm
  10. customa temperature of 50° C
  11. customThe residue was crystallized from petroleum ether

Quellen und Nachweise

ORD-Eintrag
ord-7b876a5a10b94343af915cc4c246854b
Quelldatensatz
uspto-grants-1980_04
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04196216

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion