[C:1]12(O)[CH2:10][CH:5]3[CH2:6][CH:7]([CH2:9][CH:3]([CH2:4]3)[CH2:2]1)[CH2:8]2.S(=O)(=O)(O)O.C(OC(=O)C)(=O)C.[F:24][C:25]1[CH:36]=[C:35]([OH:37])[CH:34]=[CH:33][C:26]=1[C:27]([O:29][CH2:30][CH:31]=[CH2:32])=[O:28]>ClCCl.CCCCCCC>[C:1]12([C:36]3[C:25]([F:24])=[C:26]([CH:33]=[CH:34][C:35]=3[OH:37])[C:27]([O:29][CH2:30][CH:31]=[CH2:32])=[O:28])[CH2:10][CH:5]3[CH2:6][CH:7]([CH2:9][CH:3]([CH2:4]3)[CH2:2]1)[CH2:8]2In a 250 ml three-necked flask, under nitrogen, one introduces 3.04 g 1-adamantanol, 10 ml of n-heptane and 63 μl concentrated sulfuric acid. Dropwise, 2.16 ml of acetic anhydride are added and stirring is conducted for 3 hours at room temperature. Dropwise, 540 μl concentrated sulfuric acid are added and one adds portionwise 3.92 g of allyl 2-fluoro-4-hydroxybenzoate. After this addition, one adds 25 ml of dichloromethane and agitates at room temperature for 24 hours. After vacuum drying, the solid is taken up in water, neutralized to pH 7 with sodium bicarbonate and extracted with ethyl ether. The organic layer is washed with water and then with a concentrated aqueous sodium chloride solution. After drying over magnesium sulfate, one filters and evaporates the filtrate to obtain 7 g of crude product which is chromatographed on a silica column and eluted with dichloromethane. After trituration with hexane, filtration and drying in an oven at 50° C. there were obtained 3.86 g of the desired product, melting at 219°-222° C.