[CH3:1][C@H:2]([NH:11][CH3:12])[C@@H:3]([OH:10])[C:4]1[CH:5]=[CH:6][CH:7]=[CH:8][CH:9]=1.Cl>O>[CH3:1][C@H:2]([NH:11][CH3:12])[C@@H:3]([OH:10])[C:4]1[CH:5]=[CH:6][CH:7]=[CH:8][CH:9]=1The Pseudoephedrine Resin Complex was prepared by first dissolving 857 g of pseudoephedrine HCl in 5 liter of purified water, and then slowly adding 1,589 g of AMBERLITE™ IRP-69 resin with continuous mixing. The dispersion was mixed for 4 hours and upon completion, allowed to settle before decanting the supernatant. The slurry was filtered and rinsed 3 times with sufficient amounts of purified water. The wet resin complex was then dried in a VWR™ convection oven maintained at 50° C. until moisture content was about 25%. KOLLICOAT™ SR-30D polymer (668 g) was then slowly added to the wet resin complex in a Hobart type mixer (Kitchen Aid) to form a uniform mass. The wet mass was again dried at 50° C. in a VWR™ convection oven to the moisture content around 30%. The semi-dried granules were then milled through a 40 mesh screen using CO-MIL™ brand mill and continued drying under 50° C. until the moisture content was between 4-6%. The dried granules were then milled through a 40 mesh screen using CO-MIL™ brand mill
Wird geladen…