StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Ammonium Chloride → ethyl 4-(4-amino-3-fluorophenyl)-5-cyano-1H-pyrrole-3-carboxylate

HRID 2197522
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 2197522
[Cl-].[NH4+].[C:3]([C:5]1[NH:9][CH:8]=[C:7]([C:10]([O:12][CH2:13][CH3:14])=[O:11])[C:6]=1[C:15]1[CH:20]=[CH:19][C:18]([N+:21]([O-])=O)=[C:17]([F:24])[CH:16]=1)#[N:4]>C(O)C.O.CO.[Fe]>[NH2:21][C:18]1[CH:19]=[CH:20][C:15]([C:6]2[C:7]([C:10]([O:12][CH2:13][CH3:14])=[O:11])=[CH:8][NH:9][C:5]=2[C:3]#[N:4])=[CH:16][C:17]=1[F:24]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 2

HCID 25517Ammonium ChlorideHCID 57758340ethyl 5-cyano-4-(3-fluoro-4-nitrophenyl)-1H-pyrrole-3-carboxylate

Produkt 1

HCID 66786676ethyl 4-(4-amino-3-fluorophenyl)-5-cyano-1H-pyrrole-3-carboxylateAusbeute 94 %

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 23925IronKatalysatorHCID 702Ethanol
Lösungsmittel
HCID 887MethanolLösungsmittel
HCID 962WaterLösungsmittel

Reaktionsbedingungen

Temperatur
70 °C

Versuchsvorschrift

Iron (Alrich cat#20930-9, 24.9 g, 445 mmol) and ammonium chloride (4.80 g, 89.7 mmol) were added to a suspension of ethyl 5-cyano-4-(3-fluoro-4-nitrophenyl)-1H-pyrrole-3-carboxylate (45.0 g, 148 mmol) in ethanol (540 mL) and water (180 mL) equipped with an overhead stirrer. The reaction was warmed (70° C.) for 2 h, and then cooled to rt. The mixture was diluted with methanol (500 mL) and then filtered through a well-packed pad of Celite®. The filter cake was thoroughly rinsed with methanol (1 L) and acetonitrile (2 L) and the combined filtrate was evaporated. The residue was dissolved in ethyl acetate (1.5 L) then washed with water (500 mL) and brine (500 mL). The organic layer was dried over sodium sulfate and evaporated under reduced pressure to afford the desired product (38.0 g, 94%) containing trace impurities (<5%). The material was used in the next step without further purification. 1H NMR (300 MHz, DMSO-d6) δ 13.36 (s, 1H), 8.25 (dd, J=12.8, 2.0 Hz, 1H), 6.92-6.97 (m, 1H), 6.72-6.79 (m, 1H), 5.35 (s, 2H), 4.10 (q, J=7.0 Hz, 2H), 1.16 (t, J=7.0 Hz, 3H); ES-MS m/z 274.3 (MH)+; HPLC RT (Method A) 2.62 min.

Aufarbeitung

  1. customequipped with an overhead stirrer
  2. temperaturecooled to rt
  3. filtrationfiltered through a well-packed pad of Celite®
  4. washThe filter cake was thoroughly rinsed with methanol (1 L) and acetonitrile (2 L)
  5. customthe combined filtrate was evaporated
  6. dissolutionThe residue was dissolved in ethyl acetate (1.5 L)
  7. washthen washed with water (500 mL) and brine (500 mL)
  8. dry with materialThe organic layer was dried over sodium sulfate
  9. customevaporated under reduced pressure

Quellen und Nachweise

ORD-Eintrag
ord-256947082bce40e29cb62ce43606d213
Quelldatensatz
uspto-grants-2012_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08338594B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion