StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Acetyl chloride → tert-Butyl 6a-isothiazol-5-yl-3,3a,4,6-tetrahydro-1H-pyrrolo[3,4-c]isoxazole-5-carboxylate

HRID 338110
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 338110
C(Cl)(=O)C.[S:5]1[C:9]([C:10]23[CH2:17][N:16]([C:18]([O:20][C:21]([CH3:24])([CH3:23])[CH3:22])=[O:19])[CH2:15][CH:14]2[CH2:13][O:12][N:11]3CC2C=CC(OC)=CC=2)=[CH:8][CH:7]=[N:6]1.FC(F)(F)C(O)=O.O(C(OC(C)(C)C)=O)C(OC(C)(C)C)=O.CCCC(C)C.C(OCC)(=O)C>Cl.O1CCCC1.CC(OC)(C)C.C(Cl)Cl.C(O)(C)C>[S:5]1[C:9]([C:10]23[CH2:17][N:16]([C:18]([O:20][C:21]([CH3:24])([CH3:23])[CH3:22])=[O:19])[CH2:15][CH:14]2[CH2:13][O:12][NH:11]3)=[CH:8][CH:7]=[N:6]1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

11

Edukt 5

HCID 6367Acetyl chlorideHCID 6422Trifluoroacetic acidHCID 90495Di-tert-butyl dicarbonateHCID 21882781Isohexane ethyl acetateHCID 86697924tert-Butyl 6a-isothiazol-5-yl-1-[(4-methoxyphenyl)methyl]-3,3a,4,6-tetrahydropyrrolo[3,4-c]isoxazole-5-carboxylate

Produkt 1

HCID 86697926
tert-Butyl 6a-isothiazol-5-yl-3,3a,4,6-tetrahydro-1H-pyrrolo[3,4-c]isoxazole-5-carboxylate
Ausbeute 89,1 %

Reagenzien, Katalysatoren, Lösungsmittel 5

HCID 313Hydrochloric AcidLösungsmittelHCID 3776IsopropanolLösungsmittelHCID 6344DichloromethaneLösungsmittelHCID 8028TetrahydrofuranLösungsmittelHCID 15413tert-Butyl methyl etherLösungsmittel

Reaktionsbedingungen

Temperatur
45 °C

Versuchsvorschrift

Isopropyl alcohol (5.66 L) is cooled to 5° C. and acetyl chloride (941.23 mL, 13.23 mol) is added drop wise (exothermic). The mixture is heated to 45° C., and tert-butyl 6a-isothiazol-5-yl-1-[(4-methoxyphenyl)methyl]-3,3a,4,6-tetrahydropyrrolo[3,4-c]isoxazole-5-carboxylate (460.17 g, 1.10 mol) is added to the reactor in portions. The resulting white suspension is stirred at 45° C. for 1 hour. Most of the solvent is evaporated to give a wet, off-white solid, which is dissolved in trifluoroacetic acid (2.76 L, 36.52 mol). The resulting dark solution is heated to 70° C. and stirred at this temperature for 1 hour. The reaction mixture is cooled to room temperature and concentrated under reduced pressure. The residue is azeotroped with toluene (2×2.5 L) to give a light brown solid. The residue is dissolved in 2 M aq. HCl solution (4.6 L) and DCM (4.6 L) and stirred vigorously at 40° C. for 30 minutes until full dissolution. The mixture is cooled to room temperature and separated. The aqueous layer is washed with DCM (2×500 mL). The acidic aqueous layer is cooled to 5° C. and the pH is adjusted to 10.5 by the addition of 50% wt/wt aq. NaOH solution. The mixture is cooled to 10° C. and a solution of BOC2O (252.57 g, 1.16 mol) in tetrahydrofuran (2.30 L) is added slowly. The mixture is stirred for 5 minutes and warmed to 25° C. and then stirred 1 hour longer. MTBE (2 L) is added and the resulting phases are separated. The aqueous layer is extracted with MTBE (2×1 L) and the combined organic layers are washed with brine solution (2 L), dried over MgSO4, filtered, and evaporated under reduced pressure to give the crude product as an off-white solid (347.2 g). The crude solid is dissolved in boiling 7:3 v/v isohexane/ethyl acetate (2.8 L) and the resulting clear solution is allowed to slowly cool to room temperature and then cooled in an ice-bath. The resulting white suspension is filtered and washed with cold 7:3 isohexane:ethyl acetate. The white solid is dried under vacuum and nitrogen for 2 days to give the title compound as a white solid (291.30 g, 88.9%). ES/MS (m/e): 298 (M+H).

Aufarbeitung

  1. customMost of the solvent is evaporated
  2. customto give a wet, off-white solid, which
  3. temperatureThe resulting dark solution is heated to 70° C.
  4. stirringstirred at this temperature for 1 hour
  5. temperatureThe reaction mixture is cooled to room temperature
  6. concentrationconcentrated under reduced pressure
  7. customThe residue is azeotroped with toluene (2×2.5 L)
  8. customto give a light brown solid
  9. temperatureThe mixture is cooled to room temperature
  10. customseparated
  11. washThe aqueous layer is washed with DCM (2×500 mL)
  12. temperatureThe acidic aqueous layer is cooled to 5° C.
  13. additionthe pH is adjusted to 10.5 by the addition of 50% wt/wt aq. NaOH solution
  14. temperatureThe mixture is cooled to 10° C.
  15. stirringThe mixture is stirred for 5 minutes
  16. temperaturewarmed to 25° C.
  17. stirringstirred 1 hour longer
  18. customthe resulting phases are separated
  19. extractionThe aqueous layer is extracted with MTBE (2×1 L)
  20. washthe combined organic layers are washed with brine solution (2 L)
  21. dry with materialdried over MgSO4
  22. filtrationfiltered
  23. customevaporated under reduced pressure
  24. customto give the crude product as an off-white solid (347.2 g)
  25. dissolutionThe crude solid is dissolved
  26. temperatureto slowly cool to room temperature
  27. temperaturecooled in an ice-bath
  28. filtrationThe resulting white suspension is filtered
  29. washwashed with cold 7:3 isohexane
  30. customThe white solid is dried under vacuum and nitrogen for 2 days

Quellen und Nachweise

ORD-Eintrag
ord-a15dd8db7f664c2fac134a36bc73ee73
Quelldatensatz
uspto-grants-2014_11
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08889856B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion