[Cl:1][C:2]1[CH:3]=[C:4]([NH:10][C:11]2[N:16]=[C:15](Cl)[N:14]=[C:13]([Cl:18])[N:12]=2)[CH:5]=[CH:6][C:7]=1[O:8][CH3:9].[CH:19]1([NH2:26])[CH2:25][CH2:24][CH2:23][CH2:22][CH2:21][CH2:20]1.O.[OH-].[Na+]>CC(C)=O.C(OCC)(=O)C>[Cl:18][C:13]1[N:12]=[C:11]([NH:10][C:4]2[CH:5]=[CH:6][C:7]([O:8][CH3:9])=[C:2]([Cl:1])[CH:3]=2)[N:16]=[C:15]([NH:26][CH:19]2[CH2:25][CH2:24][CH2:23][CH2:22][CH2:21][CH2:20]2)[N:14]=1To a sample of compound 101 (20.02 g, 65.6 mmol) in acetone (200 mL) was added cycloheptylamine (8.3 mL, 65.5 mmol) in acetone (55 mL) slowly by addition funnel at rt. Then water (66 mL) was added followed by aqueous sodium hydroxide (26.2 mL, 2.5 N, 65.5 mmol) by addition funnel. The reaction mixture was heated at reflux under a nitrogen atmosphere for approximately about 3 hours. The reaction was cooled, diluted with ethyl acetate, washed 1 time with water, and finally 1 time with brine. The organic layer was separated and dried over potassium carbonate/sodium sulfate. The organic layer was filtered and concentrated in vacuo. The product (24.13 g) was purified by flash column chromatography (silica gel, 1:4 ethyl acetate: hexanes). The fractions were combined and concentrated in vacuo to afford 133 as a pale yellow solid (17.66 g, 70.5%), mp 146° C.; HPLC: Inertsil ODS-3V C18, 40:10:50 [KH2PO4 (0.01M, pH 3.2): CH3OH: CH3CN], 264 nm, Rt 58.8 min, 99.9% purity); MS (ESI): m/z 382 (M+H, 100), 241 (2.8), 226 (8.4), 139 (43.5), 116 (6).