StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Formamide → 2,6-Naphthalenedicarboxamide

HRID 388184
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 388184
[CH:1]1[C:10]2[C:5](=[CH:6][C:7](C(OC)=O)=[CH:8][CH:9]=2)[CH:4]=[CH:3][C:2]=1[C:15]([O:17]C)=O.[CH:19]([NH2:21])=[O:20].C[N:23](C)C=O.C[O-].[Na+]>CO>[CH:1]1[C:10]2[C:5](=[CH:6][C:7]([C:19]([NH2:21])=[O:20])=[CH:8][CH:9]=2)[CH:4]=[CH:3][C:2]=1[C:15]([NH2:23])=[O:17]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 4

HCID 713FormamideHCID 6228DimethylformamideHCID 61225Dimethyl-2,6-naphthalenedicarboxylateHCID 10942334Sodium Methoxide

Produkt 1

HCID 4460272,6-Naphthalenedicarboxamide

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 887MethanolLösungsmittel
2×

Reaktionsbedingungen

Temperatur
100 °C

Versuchsvorschrift

2,6-Naphthalenedicarboxamide (CAS #46711-49-3) was prepared as follows. To a two liter three neck round-bottom flask fitted with a mechanical stirrer, addition funnel and condenser/Dean Stark apparatus, with a nitrogen inlet was charged 85.4 grams (0.35 mol) dimethyl 2,6-naphthalenedicarboxylate, 105.3 grams (2.34 mol) formamide, and 200 mls of anhydrous N,N-dimethylformamide. The flask contents were heated to 100 degrees C. under a nitrogen atmosphere and held for one hour. One hundred ml of a 25 wt. % solution of sodium methoxide in methanol was added through the addition funnel in four approximately equal portions. The flask contents were then heated for four hours at 100 degrees C. during which time methanol was being condensed and removed. The flask was cooled to room temperature and one liter of isopropyl alcohol was added in two 500 ml increments. After the resulting mixture was stirred for 15 minutes it was allowed to settle for one hour. Crystallized solid material was collected by filtration and air dried in the filter for 2 hours. The recovered off-white colored product weighed 112.7 grams. The solid was washed three times in deionized water and twice in methanol which yielded 71.4 grams of greater than 98% pure product. Melting point: 347-349 degrees C.; 1H NMR: This compound is insoluble in all common NMR solvents and only sparingly soluble in DMSO-d6. (DMSO-d6) δ 8.53 ppm (broad s), 8.21 ppm (broad s), 8.07 ppm (complex multi. from 8.09−8.00 ppm), 7.55 ppm (broad s), also 3.38 ppm (water), and 2.51 (DMSO); MS m/z 214 [M].

Aufarbeitung

  1. temperatureThe flask contents were then heated for four hours at 100 degrees C
  2. customcondensed
  3. customremoved
  4. temperatureThe flask was cooled to room temperature
  5. additionone liter of isopropyl alcohol was added in two 500 ml increments
  6. waitto settle for one hour
  7. customCrystallized solid material
  8. filtrationwas collected by filtration and air
  9. customdried in the
  10. filtrationfilter for 2 hours
  11. washThe solid was washed three times in deionized water

Quellen und Nachweise

ORD-Eintrag
ord-e100181f9f224e50ba86becbcccf6469
Quelldatensatz
uspto-grants-2013_02
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08377530B2

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion