StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Formaldehyde → 2-Methyl-2-(1-methylethyl)-1,3-propanediol

HRID 41229
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 41229
[CH3:1][CH:2]([CH:5](C)[CH3:6])[CH:3]=O.[CH2:8]=[O:9].[CH3:10][OH:11].[OH-].[Na+]>C(O)=O>[CH:2]([C:5]([CH3:6])([CH2:10][OH:11])[CH2:8][OH:9])([CH3:3])[CH3:1]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 4

HCID 712FormaldehydeHCID 887MethanolHCID 14798Sodium HydroxideHCID 1027522,3-Dimethylbutanal

Produkt 1

HCID 750222-Methyl-2-(1-methylethyl)-1,3-propanediolAusbeute 92 %

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 284
Formic Acid
Lösungsmittel

Reaktionsbedingungen

Temperatur
50 °C

Versuchsvorschrift

A 4 l stirring flask with condenser and nitrogen blanketing was charged with crude 2,3-dimethylbutanal product (250 g, 2.5 mol) (88% 2,3-dimethylbutanal and 11% 4-methylpentanal) and formaldehyde (30% in water, 750 g, 7.5 mol) with 120 g of methanol. Over the course of 1.5 h, sodium hydroxide (25% in water, 645 g, 4 mol) was added dropwise and the batch was heated at 50° C. Following the addition of the base, the batch was stirred at 50° C. for a further 30 min and then adjusted to a pH of 7 with formic acid at room temperature. The phases were separated. The aqueous phase contained diol (˜12%) and so was extracted with amyl alcohol. The combined organic phases were freed under reduced pressure from methanol and amyl alcohol. The crude distillation of the product took place via a distillation bridge (109-135° C. at 4 mbar). The final distillation was carried out in a packed column (108-106° C. at 4 mbar). The product was obtained in a yield of 92% as a solid with a purity of 98%.

Aufarbeitung

  1. additionthe addition of the base
  2. stirringthe batch was stirred at 50° C. for a further 30 min
  3. customThe phases were separated
  4. extractionso was extracted with amyl alcohol
  5. distillationThe crude distillation of the product
  6. customvia a distillation bridge (109-135° C. at 4 mbar)
  7. distillationThe final distillation
  8. customwas carried out in a packed column (108-106° C. at 4 mbar)
  9. customThe product was obtained in a yield of 92% as a solid with a purity of 98%

Quellen und Nachweise

ORD-Eintrag
ord-f085126624974ac7bdcecbde5164fb6b
Quelldatensatz
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08530570B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion