StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Dichloromethane → 1-(2,2,4-Trimethyl-3-cyclohexen-1-yl)ethan-1-one

HRID 42728
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 42728
[CH3:1]C(=O)C=C.[CH2:6]1[CH2:10][O:9][CH2:8][CH2:7]1.[CH3:11][C:12]([CH:14]=[C:15](C)[CH3:16])=[CH2:13].ClCCl>[Cl-].[Al+3].[Cl-].[Cl-].O>[CH3:11][C:12]1([CH3:13])[CH:14]=[C:15]([CH3:16])[CH2:10][CH2:6][CH:7]1[C:8](=[O:9])[CH3:1]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 6344DichloromethaneHCID 6570Methyl vinyl ketone2×HCID 8028TetrahydrofuranHCID 660802,4-Dimethylpenta-1,3-diene

Produkt 1

HCID 30169881-(2,2,4-Trimethyl-3-cyclohexen-1-yl)ethan-1-oneAusbeute 971,6 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 6451240
Aluminum(III) Chloride
Katalysator
HCID 962WaterLösungsmittel

Reaktionsbedingungen

Temperatur
5 °C

Versuchsvorschrift

In a 500 ml sulfonation flask with cooling funnel, dropping funnel and mechanical stirring under air (*) at 5° C. was added but-3-en-2-one (43 ml; 0.52 mol) then THF (4.2 ml; 52 mmol) followed by a careful portionwise addition of aluminum chloride (3.5 g; 26 mmol). White fumes and increase of temperature to 20° C. were observed. The mixture turned red. The temperature was decreased to 15° C. and 2,4-dimethyl-1,3-pentadiene (68 ml; 0.52 mol) was added dropwise (90 min). Exothermic reaction was observed. The reaction mixture was stirred for 8 hours at 25° C. and for 10 hours at 45° C. As the diene was still detected but-3-en-2-one was added dropwise (22 ml; 0.26 mol) (10 min) and the mixture was stirred for additional 48 hours at 25° C. Dichloromethane (200 ml) was added to the mixture which was stirred for 5 min and filtered over celite. The red solution obtained was poured into cold water (1 l) and extracted with dichloromethane (4×300 ml). Combined organic layers were washed with brine (500 ml) and water (500 ml), dried over sodium sulfate and filtered over silica. The solvent was removed in vacuo to afford 84 g (97% of theory) of 1-(2,2,4-trimethyl-cyclohex-3-enyl)-ethanone as a clear red oil.

Aufarbeitung

  1. temperatureIn a 500 ml sulfonation flask with cooling funnel
  2. temperatureWhite fumes and increase of temperature to 20° C.
  3. customwas decreased to 15° C.
  4. customExothermic reaction
  5. stirringThe reaction mixture was stirred for 8 hours at 25° C. and for 10 hours at 45° C
  6. additionwas added dropwise (22 ml; 0.26 mol) (10 min)
  7. stirringthe mixture was stirred for additional 48 hours at 25° C
  8. stirringwas stirred for 5 min
  9. filtrationfiltered over celite
  10. customThe red solution obtained
  11. extractionextracted with dichloromethane (4×300 ml)
  12. washCombined organic layers were washed with brine (500 ml) and water (500 ml)
  13. dry with materialdried over sodium sulfate
  14. filtrationfiltered over silica
  15. customThe solvent was removed in vacuo

Quellen und Nachweise

ORD-Eintrag
ord-e7df1f8a82a34de188cef0a297aaf5de
Quelldatensatz
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08536215B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion