Chlorine → Pyridine, 2,3,4,5-tetrachloro-6-(trichloromethyl)-

HRID 462819

Reaktionsgleichung

Reaktionsgleichung von HRID 462819
[Cl:1][C:2]1[C:3]([C:11]([Cl:14])([Cl:13])[Cl:12])=[N:4][C:5]([Cl:10])=[C:6]([Cl:9])[C:7]=1[Cl:8].ClCl>>[Cl:1][C:2]1[C:3]([C:11]([Cl:14])([Cl:12])[Cl:13])=[N:4][C:5]([Cl:10])=[C:6]([Cl:9])[C:7]=1[Cl:8].[Cl:1][C:2]1[C:3]([C:11]([Cl:14])([Cl:12])[Cl:13])=[N:4][CH:5]=[C:6]([Cl:9])[C:7]=1[Cl:8]

Komponenten

4

Edukt 2

HCID 24526ChlorineHCID 70811Pyridine, 2,3,4,5-tetrachloro-6-(trichloromethyl)-

Produkt 2

HCID 70811Pyridine, 2,3,4,5-tetrachloro-6-(trichloromethyl)-HCID 70990Pyridine, 3,4,5-trichloro-2-(trichloromethyl)-

Versuchsvorschrift

Fifty grams of a mixture respectively containing about 32% 3,4,5-trichloro and about 64% 3,4,5,6-tetrachloro-2-trichloromethyl pyridine on a molar basis were charged to an electrically heated 250 ml glass batch chlorination reactor. 11/2 grams of anhydrous ferric chloride powder was charged to the reactor and chlorine at 70 grams/hour was sparged into the reactor through a bottom discharging sparger and the temperature adjusted to 200° C. The flow of chlorine was controlled so that at least a 50% excess of chlorine was present in the vent from the reactor. The reaction was allowed to proceed for 5 hours at which time the optimum yield of 3,4,5,6-tetrachloro-2-trichloromethyl pyridine was obtained at about a 94 molar percent conversion of the 3,4,5-trichloro-2-trichloromethyl pyridine. The main other product produced was pentachloropyridine. The reactor contents were then transferred to a vacuum distillation product recovery section where the lower boiling chlorinated pyridine compounds such as pentachloropyridine were separated from the 3,4,5,6-tetrachloro-2-trichloromethyl pyridine. The molar yield of 3,4,5,6 -tetrachloro-2-trichloromethyl pyridine was greater than 65% based on the reacted 3,4,5-trichloro-2-trichloromethyl pyridine. Another separation method involved hydrolyzing the 3,4,5,6-tetrachloro-2-trichloromethyl pyridine resultant mixture in concentrated sulfuric acid, for example, then a chlorinated solvent such as methylene chloride, chloroform, or perchloroethylene can be used to separate the pentachloropyridine from the resultant product of the 3,4,5,6-tetrachloro-2-trichloromethyl pyridine hydrolysis, i.e. 3,4,5,6-tetrachloro picolinic acid

Aufarbeitung

  1. additionwere charged to an electrically heated 250 ml glass batch chlorination reactor
  2. customwas sparged into the reactor through a bottom discharging sparger
  3. customadjusted to 200° C

Quellen und Nachweise

ORD-Eintrag
ord-72359e552e1c4def856705d043aef2cb
Quelldatensatz
uspto-grants-1985_05
Patentnummer
US04517369

Verknüpfte Notizen

Wird geladen…