StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → 4,6-Diaminoresorcinol Dihydrochloride

HRID 488892
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 488892
[N+:1]([C:4]1[CH:10]=[C:9]([N+:11]([O-])=O)[C:7]([OH:8])=[CH:6][C:5]=1[OH:14])([O-])=O.CO.CC1C2COC(=O)C=2C(O[C@@H]2O[C@H](C(O)=O)[C@@H](O)[C@H](O)[C@H]2O)=C(C/C=C(/CCC(O)=O)\C)C=1OC.[ClH:52]>O.[C].[Pd]>[ClH:52].[ClH:52].[NH2:1][C:4]1[CH:10]=[C:9]([NH2:11])[C:7]([OH:8])=[CH:6][C:5]=1[OH:14]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 313Hydrochloric AcidHCID 887MethanolHCID 611584,6-DinitroresorcinolHCID 6442661Mycophenolic acid glucuronide

Produkt 1

HCID 27336484,6-Diaminoresorcinol DihydrochlorideAusbeute 46,4 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 178418390
HCID 178418390, Verbindung
Katalysator
HCID 962WaterLösungsmittel

Versuchsvorschrift

30 g of crude 4,6-dinitroresorcin were recrystallized in 1,500 g of ethanol to obtain 24.1 g of purified 4,6-dinitroresorcin. Next, 4.0 g of this purified 4,6-dinitroresorcin were added to methanol, and 0.0396 g of 5% palladium carbon (a 50% wet product) was then added thereto, followed by hydrogenation at 60° C. under an average hydrogen pressure of 0.8 MPaG. The reaction mass was poured into a 5% aqueous hydrochloric acid solution containing 6,000 ppm of stannous chloride, and then filtered to remove the catalyst. Afterward, analysis was carried out by HPLC, and it was confirmed that desired 4,6-diaminoresorcin was produced in a yield of 96.2 mol %. The solvent was removed from the filtrate by an evaporator to obtain the crystals of crude 4,6-dinitroresorcin. The crystals were dissolved in 21.3 g of water containing 0.32 g of stannous chloride, and 0.2 g of activated carbon was added to the solution. Thereafter, the solution was stirred for 30 minutes and then filtered to remove the activated carbon. When 16.0 g of 36% hydrochloric acid were gradually added dropwise to the filtrate, the gradual deposition of crystals was observed. The crystals were collected by filtration and then dried at 50° C. under reduced pressure to obtain 3.03 g (yield=46.4%) of 4,6-diaminoresorcin dihydrochloride.

Aufarbeitung

  1. additionwas then added
  2. customfollowed by hydrogenation at 60° C. under an average hydrogen
  3. filtrationfiltered
  4. customto remove the catalyst
  5. customwas produced in a yield of 96.2 mol %
  6. customThe solvent was removed from the filtrate by an evaporator
  7. customto obtain the crystals of crude 4,6-dinitroresorcin
  8. additionwas added to the solution
  9. filtrationfiltered
  10. customto remove the activated carbon
  11. additionWhen 16.0 g of 36% hydrochloric acid were gradually added dropwise to the filtrate
  12. filtrationThe crystals were collected by filtration
  13. customdried at 50° C. under reduced pressure

Quellen und Nachweise

ORD-Eintrag
ord-b906e51402764bcd9e6827cb433d7bad
Quelldatensatz
uspto-grants-2005_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US06974881B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion