StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Toluene → Hexylnorbornene

HRID 555210
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 555210
[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH3:6].[C:7]1([CH3:13])[CH:12]=[CH:11]C=[CH:9][CH:8]=1.F[C:15]1C([B-](C2C(F)=C(F)C(F)=C(F)C=2F)(C2C(F)=C(F)C(F)=C(F)C=2F)C2C(F)=C(F)C(F)=C(F)C=2F)=C(F)C(F)=C(F)C=1F.C[NH+](C)C1C=CC=CC=1.ClCCl>C1COCC1.C1(C)C=C(C)C=C(C)C=1>[CH2:2]([C:1]12[CH2:13][CH:7]([CH2:12][CH2:11]1)[CH:8]=[CH:9]2)[CH2:3][CH2:4][CH2:5][CH2:6][CH3:15]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 1140TolueneHCID 6344DichloromethaneHCID 115971-HexeneHCID 10996402N,N-dimethylanilinium tetrakis(pentafluorophenyl)borate

Produkt 1

HCID 21946566Hexylnorbornene

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 7947
Mesitylene
Lösungsmittel
HCID 8028TetrahydrofuranLösungsmittel

Reaktionsbedingungen

Temperatur
120 °C

Versuchsvorschrift

HxNB (8.94 g, 0.05 mol), diPhNB (16.1 g, 0.05 mol), 1-hexene (4.2 g, 0.05 mol) and toluene (142.0 g) were combined in a 250 mL serum bottle and heated to 120° C. in an oil bath to form a solution. To this solution were added [Pd(PCy3)2(O2CCH3)(NCCH3)]tetrakis(pentafluorophenyl)borate (Pd1446) (5.8E-3 g, 4.0E-6 mol) and N,N-dimethylanilinium tetrakis(pentafluorophenyl)borate (DANFABA) (3.2E-3 g, 4.0E-6 mol), each in the form of a concentrated dichloromethane solution. After addition, the resulting mixture was maintained at 120° C. for 6 hours. The copolymer was precipitated by adding methanol drop wise into the vigorously stirred reaction mixture. The precipitated copolymer was collected by filtration and dried in an oven at 80° C. under vacuum. After drying, 12.0 g was obtained (48%). The molecular weight of the copolymer was determined by GPC in THF solvent (polystyrene standard) to be Mw=16,196 and Mn=8,448. The composition of the copolymer was determined by 1H-NMR to be 54/46 HxNB/diPhNB. The refractive indices of this polymer were measured by prism coupling method and determined to be 1.5569 in TE mode and 1.5555 in TM mode at a wavelength of 633 nm. The dried copolymer was dissolved in sufficient mesitylene to result in a 10 wt % copolymer solution.

Aufarbeitung

  1. customto form a solution
  2. additionAfter addition
  3. temperaturethe resulting mixture was maintained at 120° C. for 6 hours
  4. customThe copolymer was precipitated
  5. additionby adding methanol
  6. customdrop wise into the vigorously stirred reaction mixture
  7. filtrationThe precipitated copolymer was collected by filtration
  8. customdried in an oven at 80° C. under vacuum
  9. customAfter drying
  10. custom12.0 g was obtained (48%)
  11. customto result in a 10 wt % copolymer solution

Quellen und Nachweise

ORD-Eintrag
ord-82de960078cb4a06a34ef9298f936faf
Quelldatensatz
uspto-grants-2011_11
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08053166B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion