[F:1][C:2]([F:12])([S:9]([O-:11])=[O:10])[C:3]([F:8])([F:7])[CH2:4][CH2:5][OH:6].[CH2:13]([NH+:15]([CH2:18][CH3:19])[CH2:16][CH3:17])[CH3:14].OO.S([O-])([O-])=[O:23].[Na+].[Na+]>O>[F:12][C:2]([F:1])([S:9]([O-:23])(=[O:11])=[O:10])[C:3]([F:7])([F:8])[CH2:4][CH2:5][OH:6].[CH2:13]([NH+:15]([CH2:18][CH3:19])[CH2:16][CH3:17])[CH3:14]A 500 mL reactor was charged with 112 g (46% purity, 0.17 moles) of triethylammonium 1,1,2,2-tetrafluoro-4-hydroxy-butane-1-sulfinate, 200 g of water and 41 g (0.36 mole) of 30% hydrogen peroxide, at room temperature, followed by 6 hours of stirring at 40° C. Upon confirming the termination of the reaction, a reaction liquid underwent cooling and 7.5 g of sodium sulfite was added to the reaction liquid, followed by stirring. Subsequently, a liquid obtained by distilling the solvent out of the reaction liquid was rinsed with 50 g of hexane, and then extracted with 100 g of chloroform. It was heated under a reduced pressure so as to distill a volatile component off and then dried, thereby obtaining 43 g of a target triethylammonium 1,1,2,2-tetrafluoro-4-hydroxy-butane-1-sulfonate. It exhibited a purity of 50% and a yield of 40% at this time. As a result of analysis, it was found that 4-bromo-3,3,4,4-tetrafluorobutan-1-ol which had been confirmed to disappear by the 1st step (sulfination step) was formed during this 2nd step (oxidation step) as a by-product in an amount of 9%.