StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Phosgene → 2-Tert-butoxycarbonyloxyimino-1-phenylbutane-1,3-dione

HRID 597680
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 597680
ON=C(C(=O)C)[C:4]([C:6]1[CH:11]=CC=C[CH:7]=1)=O.C(Cl)(Cl)=[O:16].Cl[C:20]([O:22][N:23]=[C:24]([C:33](=[O:35])[CH3:34])[C:25]([C:27]1[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=1)=[O:26])=[O:21]>C1C=CC=CC=1.O.N1C=CC=CC=1.C(O)(C)(C)C>[C:6]([O:21][C:20]([O:22][N:23]=[C:24]([C:33](=[O:35])[CH3:34])[C:25]([C:27]1[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=1)=[O:26])=[O:16])([CH3:11])([CH3:7])[CH3:4]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

8

Edukt 3

HCID 6371PhosgeneHCID 544603982-Chlorocarbonyloxyimino-1-phenylbutane-1,3-dioneHCID 178468376CID 6803989

Produkt 1

HCID 545674372-Tert-butoxycarbonyloxyimino-1-phenylbutane-1,3-dione

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 241BenzeneLösungsmittel3×
HCID 962
Water
Lösungsmittel
HCID 1049PyridineLösungsmittel2×
HCID 6386tert-ButanolLösungsmittel

Versuchsvorschrift

A solution of 2-hydroxyimino-1-phenylbutane-1,3-dione (3.82 g.) and pyridine (1.62 ml.) in benzene (30 ml.) was added dropwise to a solution of phosgene (1.98 g.) in benzene (25 ml.) for 40 minutes at 5° to 9° C. After stirring for 1 hour at the same temperature, the mixture was allowed to stand overnight. A solution of tert-butyl alcohol (2.96 g.) and pyridine (3.16 g.) in benzene (30 ml.) was added dropwise for 30 minutes at 5° C. to the resultant solution containing 2-chlorocarbonyloxyimino-1-phenylbutane-1,3-dione. After stirring for 1 hour at the same temperature, the mixture was stirred for 6 hours at room temperature, after which the mixture was allowed to stand overnight. Cooled water (100 ml.) was added to the reaction mixture and the organic layer was then washed with water, a 0.5M citric acid aqueous solution (20 ml.) (4 times) and a 5% sodium carbonate aqueous solution (20 ml.) (4 times) until the aqueous layer became almost colorless. The organic layer was further washed with a sodium chloride aqueous solution and then dried over magnesium sulfate. After drying, the solution was treated with activated charcoal and the solvent was distilled off to give an oil (3.48 g.). The oil was partly crystallized by allowing it to stand and ether was then added to the mixture to precipitate crystals. The precipitates were collected by filtration and recrystallized from a mixed solvent of carbon tetrachloride and petroleum ether to give 2-tert-butoxycarbonyloxyimino-1-phenylbutane-1,3-dione (350 mg.), mp 90° to 103° C (dec.).

Aufarbeitung

  1. waitto stand overnight
  2. stirringAfter stirring for 1 hour at the same temperature
  3. stirringthe mixture was stirred for 6 hours at room temperature
  4. waitto stand overnight
  5. washthe organic layer was then washed with water
  6. washThe organic layer was further washed with a sodium chloride aqueous solution
  7. dry with materialdried over magnesium sulfate
  8. customAfter drying
  9. additionthe solution was treated with activated charcoal
  10. distillationthe solvent was distilled off
  11. customto give an oil (3.48 g.)
  12. customThe oil was partly crystallized
  13. additionether was then added to the mixture
  14. customto precipitate crystals
  15. filtrationThe precipitates were collected by filtration
  16. customrecrystallized from a mixed solvent of carbon tetrachloride and petroleum ether

Quellen und Nachweise

ORD-Eintrag
ord-dc2208c0b8154cfc8b8e0db2e717af90
Quelldatensatz
uspto-grants-1977_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04014915

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion