StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

M-Cresol → 2-Hydroxy-6-methylbenzaldehyde

HRID 654255
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 654255
[CH:1]1[C:6]([OH:7])=[CH:5][CH:4]=[CH:3][C:2]=1[CH3:8].[OH:9][CH2:10]C1C(O)=C(CO)C=C(C)C=1.O.O.C(O)(=O)C(O)=O.CCOCCOC(C)=O.C=O>O>[C:1]1([CH:10]=[O:9])[C:2]([CH3:8])=[CH:3][CH:4]=[CH:5][C:6]=1[OH:7]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 5

HCID 342M-CresolHCID 712FormaldehydeHCID 70392,6-Dimethylol-p-cresolHCID 8095Glycol monoethyl ether acetateHCID 61373Oxalic acid dihydrate

Produkt 1

HCID 5851742-Hydroxy-6-methylbenzaldehyde

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 962WaterLösungsmittel

Reaktionsbedingungen

Temperatur
70 °C

Versuchsvorschrift

A phenolic resin rich in alternating phenolic copolymer block segments was formed by first reacting a mixture of 519.0 g of 99 percent pure m-cresol, 538.2 g 97 percent pure 2,6-bis(hydroxymethyl)-p-cresol and 20 g oxalic acid dihydrate in a solvent mixture of 40 ml deionized water and 200 ml ethyl cellosolve acetate. The reaction mixture was heated to about 70° C. to initiate the reaction forming the alternating copolymer. At 102° C., 32.6 g of 36.9 percent formaldehyde was added in 8 minutes to the reaction mixture to form substantially m-cresol-formaldehyde block segments and to chemically bond these segments to the previously formed alternating copolymer. After heating the mixture at reflux for three hours, the amount of heat was increased to remove the water and solvent by distillation. Partial vacuum was applied at about 220° C. and gradually increased to 4 mm Hg to remove the unreacted monomers. Maximum mixture temperature during vacuum stripping was about 226° C. The copolymer was poured from the reaction kettle and allowed to cool. About 840 g of a block copolymer resin having a number average molecular weight, Mn, of 1241 Daltons and a Tg of 112° C. were obtained.

Aufarbeitung

  1. customwas formed
  2. additionin a solvent mixture of 40 ml
  3. customforming the alternating copolymer

Quellen und Nachweise

ORD-Eintrag
ord-d7196dfa79ee47dd8dc4d11fe19bc97e
Quelldatensatz
uspto-grants-1992_07
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05130410

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion