StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → Ethyl 7-chloroimidazo[1,2-A]pyridine-3-carboxylate

HRID 706558
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 706558
Cl[C:2]([C:5]([O:7][CH2:8][CH3:9])=[O:6])=[CH:3][O-].[K+].Cl.[Cl:12][C:13]1[CH:18]=[CH:17][N:16]=[C:15]([NH2:19])[CH:14]=1.C(=O)([O-])[O-].[Na+].[Na+]>CCO.O>[Cl:12][C:13]1[CH:18]=[CH:17][N:16]2[C:2]([C:5]([O:7][CH2:8][CH3:9])=[O:6])=[CH:3][N:19]=[C:15]2[CH:14]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 313Hydrochloric Acid2×HCID 10340Sodium CarbonateHCID 5818662-Amino-4-chloropyridineHCID 74089075Potassium 2-chloro-3-ethoxy-3-oxoprop-1-en-1-olate2×

Produkt 1

HCID 67107280Ethyl 7-chloroimidazo[1,2-A]pyridine-3-carboxylateAusbeute 88,7 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 702EthanolLösungsmittel2×HCID 962WaterLösungsmittel

Reaktionsbedingungen

Temperatur
70 °C

Versuchsvorschrift

A flask equipped with a reflux condenser, mechanical stirring, and an internal temperature probe, was charged with potassium 2-chloro-3-ethoxy-3-oxoprop-1-en-1-olate (58.70 g, 311.1 mmol) followed by addition 200 mL of EtOH to form a slurry. Aqueous hydrogen chloride (4.862 mL, 15.56 mmol) in EtOH was then added to the slurry. The slurry was stirred for about 15 minutes, and then 4-chloropyridin-2-amine (20.00 g, 155.6 mmol) was added, and the mixture was warmed to 70° C. After about one hour, an additional 2 equivalents of 3.2 M aqueous HCl were added and the mixture stirred at 70° C. for 16 hours. At this point, an additional 30 g of potassium 2-chloro-3-ethoxy-3-oxoprop-1-en-1-olate were added and the mixture stirred at 70° C. for 2 hours to facilitate completion of the reaction. The mixture was cooled to ambient temperature and 500 mL of water were added, followed by adjustment of the pH to 11 with 10% aqueous sodium carbonate. After stirring for several hours, the precipitated solids were collected by filtration and dried under vacuum to give 31 g (88%) of the desired compound.

Aufarbeitung

  1. customA flask equipped with a reflux condenser
  2. customto form a slurry
  3. waitAfter about one hour
  4. stirringthe mixture stirred at 70° C. for 16 hours
  5. stirringthe mixture stirred at 70° C. for 2 hours
  6. customcompletion of the reaction
  7. temperatureThe mixture was cooled to ambient temperature
  8. stirringAfter stirring for several hours
  9. filtrationthe precipitated solids were collected by filtration
  10. customdried under vacuum

Quellen und Nachweise

ORD-Eintrag
ord-5ebfdb4a77444986bd5a376cf41849cd
Quelldatensatz
uspto-grants-2015_11
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US09174981B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion