StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Toluene → Hexylnorbornene

HRID 909980
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 909980
[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH3:6].[C:7]1([CH3:13])[CH:12]=[CH:11]C=[CH:9][CH:8]=1.Cl[CH2:15]Cl>C1COCC1.C1(C)C=C(C)C=C(C)C=1>[CH2:2]([C:1]12[CH2:13][CH:7]([CH2:12][CH2:11]1)[CH:8]=[CH:9]2)[CH2:3][CH2:4][CH2:5][CH2:6][CH3:15]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 3

HCID 1140TolueneHCID 6344DichloromethaneHCID 115971-Hexene

Produkt 1

HCID 21946566Hexylnorbornene

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 7947MesityleneLösungsmittelHCID 8028TetrahydrofuranLösungsmittel

Reaktionsbedingungen

Temperatur
80 °C

Versuchsvorschrift

HxNB, (10.0 g, 0.056 mol), 1-hexene (4.71 g, 0.056 mol) and toluene (56.7 g) were combined in a 250 mL serum bottle and heated to 80° C. in an oil bath to form a solution. To this solution were added Pd1446, (4.10E-4 g, 2.80E-7 mol) and DANFABA, (2.20E-4 g, 2.80E-7 mol), each in the form of a concentrated solution in dichloromethane. After addition, the resulting mixture was maintained at 80° C. for 40 minutes. The homopolymer was precipitated by adding methanol drop wise into the vigorously stirred reaction mixture. The precipitated copolymer was collected by filtration and dried in an oven at 60° C. under vacuum. After drying, 5.8 g was obtained (58%). The molecular weight of the copolymer, determined by GPC in THF solvent (polystyrene standard) provided Mw=121,541 and Mn=59,213. The refractive indices of this polymer were measured by prism coupling method and determined to be 1.5146 in TE mode and 1.5129 in TM mode at a wavelength of 633 nm. The Tg (based on thermomechanical analysis (TMA) measurement) of this polymer was 208° C. The dried homopolymer was dissolved in sufficient mesitylene to result in a 10 wt % homopolymer solution.

Aufarbeitung

  1. customto form a solution
  2. additionAfter addition
  3. temperaturethe resulting mixture was maintained at 80° C. for 40 minutes
  4. customThe homopolymer was precipitated
  5. additionby adding methanol
  6. customdrop wise into the vigorously stirred reaction mixture
  7. filtrationThe precipitated copolymer was collected by filtration
  8. customdried in an oven at 60° C. under vacuum
  9. customAfter drying
  10. custom5.8 g was obtained (58%)
  11. customprovided Mw=121,541 and Mn=59,213
  12. customwas 208° C
  13. customto result in a 10 wt % homopolymer solution

Quellen und Nachweise

ORD-Eintrag
ord-6803ea5cdee54608870d159d646fa15c
Quelldatensatz
uspto-grants-2011_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08021825B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion