StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Sulfuric Acid → 3-Hydroxy-2,6-naphthalenedisulfonic acid

HRID 916511
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 916511
[OH:1][C:2]1[CH:11]=[C:10]2[C:5]([CH:6]=[CH:7][C:8]([S:12]([OH:15])(=[O:14])=[O:13])=[CH:9]2)=[CH:4][CH:3]=1.[OH:16][S:17](O)(=[O:19])=[O:18]>O>[OH:1][C:2]1[C:3]([S:17]([OH:19])(=[O:18])=[O:16])=[CH:4][C:5]2[C:10]([CH:11]=1)=[CH:9][C:8]([S:12]([OH:15])(=[O:13])=[O:14])=[CH:7][CH:6]=2
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 2

HCID 1118Sulfuric AcidHCID 70897-Hydroxy-2-naphthalenesulfonic acid

Produkt 1

HCID 119707503-Hydroxy-2,6-naphthalenedisulfonic acidAusbeute 68 %

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 962WaterLösungsmittel2×

Reaktionsbedingungen

Temperatur
115 °C

Versuchsvorschrift

7-Hydroxynaphthalene-2-sulfonic acid (250 g, 1.16 mol) was added in portions to a mixture of concentrated H2SO4 (950 g) and water (50 g). The mixture was stirred at 110-120° C. for 3 hours, cooled to room temperature, added to a mixture of ice and water (5000 ml) and the product precipitated by the addition of sodium chloride. The resultant slurry was warmed to 90° C. to dissolve the product, stirred for 1 hour at this temperature and then allowed to cool. The product was filtered off and the damp product dissolved in water (3000 ml) at pH 10 by the addition of concentrated sodium hydroxide solution. The solution was then filtered to remove a small amount of insoluble material. The pH of the filtrate was lowered to 7 with concentrated HCl and the product precipitated by the addition sodium chloride. The product was filtered off and dried in a vacuum oven to give 117 g of a cream solid (68% yield).

Aufarbeitung

  1. temperaturecooled to room temperature
  2. customthe product precipitated by the addition of sodium chloride
  3. temperatureThe resultant slurry was warmed to 90° C.
  4. dissolutionto dissolve the product
  5. stirringstirred for 1 hour at this temperature
  6. temperatureto cool
  7. filtrationThe product was filtered off
  8. dissolutionthe damp product dissolved in water (3000 ml) at pH 10 by the addition of concentrated sodium hydroxide solution
  9. filtrationThe solution was then filtered
  10. customto remove a small amount of insoluble material
  11. customthe product precipitated by the addition sodium chloride
  12. filtrationThe product was filtered off
  13. customdried in a vacuum oven

Quellen und Nachweise

ORD-Eintrag
ord-b1ad8c55b0b9487bb11fc65b25bab200
Quelldatensatz
uspto-grants-2007_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07270406B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion