StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

2-Mercaptoethanol → Acrylic acid vinylpyrrolidone

HRID 931861
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 931861
[CH:1]([N:3]1[CH2:7][CH2:6][CH2:5][C:4]1=[O:8])=[CH2:2].[C:9]([OH:13])(=[O:12])[CH:10]=[CH2:11].N(C(C1NCCN=1)(C)C)=NC(C1NCCN=1)(C)C.SCCO>CC(C)=O.O.CS(C)=O>[CH:1]([N:3]1[CH2:7][CH2:6][CH2:5][C:4]1=[O:8])=[CH2:2].[C:9]([OH:13])(=[O:12])[CH:10]=[CH2:11]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

8

Edukt 4

HCID 15672-MercaptoethanolHCID 6581Acrylic AcidHCID 6917N-vinyl-2-pyrrolidoneHCID 887152,2'-Azobis(2-(2-imidazolin-2-yl)propane)

Produkt 1

HCID 197163Acrylic acid vinylpyrrolidone

Reagenzien, Katalysatoren, Lösungsmittel 3

HCID 180
Acetone
Lösungsmittel
2×
HCID 679Dimethyl SulfoxideLösungsmittel
HCID 962WaterLösungsmittel

Versuchsvorschrift

In a 500 mL three-necked flask, N-vinylpyrrolidone (66.68 g, 0.60 mol), acrylic acid (21.62 g, 0.30 mol), dimethyl sulfoxide (353.96 g), a polymerization initiator VA-061 (Wako Pure Chemical Industries, Ltd., 0.1408 g, 0.562 mmol) and 2-mercaptoethanol (43.8 μL, 0.63 mmol) were charged, and then equipped with a three-way stop-cock, a reflux condenser tube, a thermometer and a mechanical stirrer. The concentration of the monomer was 20% by weight. After degassing inside the three-necked flask using a vacuum pump and repeating replacement by argon three times, stirring was carried out at 50° C. for 0.5 hours, followed by temperature rise to 70° C. and further stirring for 6.5 hours. After completion of the polymerization, the polymerization reaction solution was cooled to room temperature and 100 mL of water was added, and then the solution was poured into 400 mL of acetone and the mixed solution was left to stand overnight. On the next day, 200 mL of acetone was further added and the solution was left to stand, and then the supernatant was removed by decantation. The obtained solid component was washed seven times with acetone/water (=400 mL/100 mL). The solid component was dried overnight by a vacuum drying oven at 60° C. Liquid nitrogen was charged and the solid component was crushed by a spatula, and then dried by a vacuum drying oven at 60° C. for 3 hours. The thus obtained copolymer had a molecular weight of Mn: 46 kD, Mw: 180 kD (Mw/Mn=3.9).

Aufarbeitung

  1. customequipped with a three-way
  2. customAfter degassing inside the three-necked flask
  3. customfollowed by temperature rise to 70° C.
  4. stirringfurther stirring for 6.5 hours
  5. customAfter completion of the polymerization
  6. customthe polymerization reaction solution
  7. waitthe mixed solution was left
  8. waitto stand overnight
  9. waitthe solution was left
  10. customthe supernatant was removed by decantation
  11. washThe obtained solid component was washed seven times with acetone/water (=400 mL/100 mL)
  12. customThe solid component was dried overnight by a vacuum
  13. customdrying oven at 60° C
  14. additionLiquid nitrogen was charged
  15. customthe solid component was crushed by a spatula
  16. customdried by a vacuum
  17. customdrying oven at 60° C. for 3 hours

Quellen und Nachweise

ORD-Eintrag
ord-18fb40fd1b7747328ff025a57bda5347
Quelldatensatz
uspto-grants-2016_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US09297930B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion