StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → 3-Hydroxymethyl-2,3'-bipyridyl

HRID 969739
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 969739
[N:1]1[CH:6]=[CH:5][CH:4]=[C:3]([C:7](O)=[O:8])[C:2]=1[C:10]1[CH:11]=[N:12][CH:13]=[CH:14][CH:15]=1.C(N(CC)CC)C.[BH4-].[Na+].CO.Cl>O1CCCC1>[OH:8][CH2:7][C:3]1[C:2]([C:10]2[CH:11]=[N:12][CH:13]=[CH:14][CH:15]=2)=[N:1][CH:6]=[CH:5][CH:4]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 5

HCID 313Hydrochloric AcidHCID 887MethanolHCID 8471TriethylamineHCID 4311764Sodium borohydrideHCID 23423222HCID 23423222, Verbindung

Produkt 1

HCID 160370823-Hydroxymethyl-2,3'-bipyridylAusbeute 84,4 %

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 8028TetrahydrofuranLösungsmittel

Reaktionsbedingungen

Temperatur
20 °C

Versuchsvorschrift

To a continually stirred, ice-cold solution of 2,3′-bipyridine-3-carboxylic acid (0.28 g, 1.40 mmole) in dry tetrahydrofuran (10 ml) and triethylamine (0.20 ml, 1.43 mmole) ethyl chloroformate (0.14 ml, 1.46 mmole) was added drop-by-drop over a 30 minute period. The precipitated product was then filtered and washed several times with tetrahyrofuran (3×2 ml). The THF phases were combined, cooled to +10° C., and while stirring under an argon atmosphere, sodium borohydride (0.185 g, 4.9 mmole) was added and then methanol (0.90 ml, 22.2 mmole) was added drop-by-drop over a 1 hour period during which time the temperature increased to 20° C. (Soai et al., 1987). The material was stirred for an additional 1 hour at room temperature. Then, 1N hydrochloric acid was carefully added, the solvent was evaporated under vacuum to 5 ml and washed with dichloromethane (3×5 ml). Sodium carbonate (0.85 g) was added to the aqueous phase, which was then extracted with dichloromethane. The combined fractions were dried with magnesium sulfate and evaporated under vacuum (2 Hg mm, 45° C.) giving a pure product (0.22 g, 84%). 1H-NMR, δ, ppm, 8.71 (1H, dd, J=2.1, 0.6 Hz, C2′-H), 8.55 (1H, dd, J==4.8, 1.5 Hz, C6-H), 8.52 (1H, dd, J=4.8, 1.8 Hz, C6′-H), 7.95 (1H, dd, J=7.8, 1.5 Hz, C4-H), 7.91 (1H, ddd, J=7.8, 2.1, 1.8 Hz, C4′-H), 7.35 (1H, ddd, J=7.8, 4.8, 0.6 Hz, C5′-H), 7.31 (1H, dd, J=7.8, 4.8 Hz, C5-H), 4.58 (2H, s, CH2-O).

Aufarbeitung

  1. filtrationThe precipitated product was then filtered
  2. washwashed several times with tetrahyrofuran (3×2 ml)
  3. temperaturecooled to +10° C.
  4. stirringwhile stirring under an argon atmosphere
  5. stirringThe material was stirred for an additional 1 hour at room temperature
  6. customthe solvent was evaporated under vacuum to 5 ml
  7. washwashed with dichloromethane (3×5 ml)
  8. additionSodium carbonate (0.85 g) was added to the aqueous phase, which
  9. extractionwas then extracted with dichloromethane
  10. dry with materialThe combined fractions were dried with magnesium sulfate
  11. customevaporated under vacuum (2 Hg mm, 45° C.)

Quellen und Nachweise

ORD-Eintrag
ord-8899560f29a0445c9127db4d09783294
Quelldatensatz
uspto-grants-2007_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07307171B2

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion