StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.1
  1. Startseite
  2. /Reaktion

Chlorotrimethylsilane → (S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester

HRID 992198
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 992198
Cl[Si](C)(C)C.[O:6]1[CH2:10][CH2:9][O:8][CH:7]1[CH2:11][CH2:12][CH2:13][C@H:14]([NH2:18])[C:15]([OH:17])=[O:16].S(OC)(O[CH3:22])=O.C[O-].[K+]>CO.C(OCC)(=O)C>[NH2:18][C@@H:14]([CH2:13][CH2:12][CH2:11][CH:7]([O:8][CH3:9])[O:6][CH3:10])[C:15]([O:17][CH3:22])=[O:16]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 6397ChlorotrimethylsilaneHCID 69223Dimethyl sulfiteHCID 11041524Allysine ethylene acetalHCID 23664618Potassium methoxide

Produkt 1

HCID 10130457(S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl esterAusbeute 80,2 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 887
Methanol
Lösungsmittel
HCID 8857Ethyl AcetateLösungsmittel

Reaktionsbedingungen

Temperatur
42.5 °C

Versuchsvorschrift

Under nitrogen, chlorotrimethyl silane (28.0 g) was added to a slurry of 5-(1,3-dioxolan-2-yl)-(S)-2-amino-pentanoic acid (20.0 g) and dimethyl sulfite (12.0 g) in methanol (240 mL) to afford a homogeneous solution. Following the observation of an exotherm to 29° C., the solution was heated to 40-45° C., stirred at that temperature for 8 h and at ˜22° C. for up to 72 hours. In-process HPLC analysis showed that the reaction was complete (˜93 M % conversion to product) and the resulting solution was cooled to −5 to −10° C. With stirring, the apparent pH of the mixture was adjusted to 11.7 to 11.9 by the slow careful addition of 32% (or 4.45 M) methanolic potassium methoxide solution (70 mL) maintaining the temperature in the range −5 to 0° C. Analysis of the product slurry (NMR) indicated that the neutralization was complete (chemical shift of the alpha proton of BMS-205787 was <3.36 ppm). The solvent of the product slurry was exchanged with ethyl acetate by first concentrating the thin slurry under vacuum at <30° C. to 300 mL volume followed by the addition of ethyl acetate until the removal of methanol was completed as judged by in-process GC analysis (<1 AP). Upon completion of the solvent exchange, the batch volume was adjusted to ˜400 mL with ethyl acetate and the resulting slurry was filtered. Poly(acrylic acid co-acrylamide), potassium salt (3.0 to 3.2 g) and water (30-32 mL) were added to the filtrate. The mixture was stirred for ˜35 minutes and filtered. Optionally, the Poly(acrylic acid co-acrylamide), potassium salt treatment can be repeated on the filtrate if the quantity of ethylene glycol exceeds 0.15 equivalents, as judged by in-process GC analysis. Following in-process HPLC analysis, (S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester (17.4 g) was obtained as an ethyl acetate solution in 80.8 M % yield.

Aufarbeitung

  1. customto afford a homogeneous solution
  2. customto 29° C.
  3. temperaturethe resulting solution was cooled to −5 to −10° C
  4. stirringWith stirring
  5. temperaturemaintaining the temperature in the range −5 to 0° C
  6. concentrationby first concentrating the thin slurry under vacuum at <30° C. to 300 mL volume
  7. additionfollowed by the addition of ethyl acetate until the removal of methanol
  8. filtrationthe resulting slurry was filtered
  9. additionPoly(acrylic acid co-acrylamide), potassium salt (3.0 to 3.2 g) and water (30-32 mL) were added to the filtrate
  10. stirringThe mixture was stirred for ˜35 minutes
  11. filtrationfiltered

Quellen und Nachweise

ORD-Eintrag
ord-4c59bf2615444abebac5fdf8901bcf1c
Quelldatensatz
uspto-grants-2002_10
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US06468781B1

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion