HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

2,4-Dichlorotoluene

HCID 7254
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
95-73-8
Standard SMILES
Cc1ccc(Cl)cc1Cl
InChIKey
FUNUTBJJKQIVSY-UHFFFAOYSA-N
Molecular formula
C7H6Cl2
Average molar mass
161.03 g/mol
Monoisotopic mass
159.9846556

Overview

2,4-dichlorotoluene is a clear colorless liquid. (NTP, 1992)

Names & identifiers

Preferred name
2,4-Dichlorotoluene
IUPAC
2,4-dichloro-1-methylbenzene
English name
2,4-Dichlorotoluene
Molecular formula
C7H6Cl2
Molecular weight
161.03

Names & synonyms

2,4-DICHLOROTOLUENE95-73-82,4-Dichloro-1-methylbenzeneBenzene, 2,4-dichloro-1-methyl-Toluene, 2,4-dichloro-DTXSID50407023S32N6LG3XNSC-8764DTXCID3020702RefChem:82400202-445-82,4-dichloro-1-methyl-benzene
Show more names
2,4-DCT2,4-Dichlortoluol4-DCT2.4-Dichloroto2,4-Dichlorotoluol2,4-Dichlortoluene2,4-DICHLORO TOLUNE2,4-dichloro-toluen
2,4-dichloromethylbenzene2,4-Diclorotoluene4,6-dichlorotolueneMFCD00000583Benzene,4-dichloro-1-methyl-2,4-Dichlorotoluene Solution in Methanol, 1000ug/mLHSDB 2567NSC 8764

Database identifiers

CAS
95-73-8
PubChem CID
7254
DTXSID
DTXSID5040702
ChEBI
CHEBI:81651
UNII
3S32N6LG3X
EC Number
202-445-8
Nikkaji
J3.568H

Properties

Computed structural properties

XLogP
4.2
Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
0
Heavy atoms
9
Formal charge
0
Complexity
92.9

Experimental & physicochemical properties

SolventsSolvents -> Chlorinated Aromatics
SpringerMaterials PropertiesAngular frequency
LogP · 3 items

Log Kow= 4.24

4.24

4.09

Density · 4 items

1.2498 (NTP, 1992) - Denser than water; will sink

1.2476 @ 20 °C/20 °C

1.25 g/cm³

Relative density of the vapour/air-mixture at 20 °C (air = 1): 1.02

Color/FormColorless liquid
Solubility · 2 items

INSOL IN WATER

Solubility in water, g/100ml at 20 °C: (very poor)

Flash Point · 3 items

93 °C

199 °F, open cup

87 °C c.c.

Boiling Point · 3 items

385 to 387 °F at 760 mmHg (NTP, 1992)

201 °C @ 760 mm Hg

at 101.3kPa: 200 °C

Melting Point · 3 items

7.7 °F (NTP, 1992)

-13.5 °C

-13.5 °C

Vapor DensityRelative vapor density (air = 1): 5.56
Vapor Pressure · 3 items

0.45 [mmHg]

0.458 mm Hg at 25 °C

Vapor pressure, kPa at 50 °C: 0.4

Surface Tension38.29 dynes/cm @ 25 °C

Physicochemical properties

Melting point
-14 °C · -14 °C
Boiling point
198 °C · 198 °C
Density
1.25 · 1.25
vapor pressure
4 hPa · 4 hPa (50 °C)
refractive index
1.55 · 1.55
Flash point
102 °C · 102 °C
storage temp.
30 °C · Store below +30°C.
form
clear liquid
color
Colorless to Almost colorless
Water Solubility
immiscible
BRN
1931691 · 1931691
Henry's Law Constant
2.7 · 2.7×10-3 mol/(m3Pa) at 25℃, Schwardt et al. (2021)
InChI
1S/C7H6Cl2/c1-5-2-3-6(8)4-7(5)9/h2-4H,1H3
InChIKey
FUNUTBJJKQIVSY-UHFFFAOYSA-N
SMILES
Cc1ccc(Cl)cc1Cl
CAS DataBase Reference
95 · 95-73-8(CAS DataBase Reference)
EWG's Food Scores
2 · 2
FDA UNII
3 S32N6LG3X · 3S32N6LG3X
NIST Chemistry Reference
2 · Benzene, 2,4-dichloro-1-methyl-(95-73-8)
EPA Substance Registry System
2 · 2,4-Dichlorotoluene (95-73-8)
UNSPSC Code
12352100 · 12352100
NACRES
22 · NA.22
Symbol(GHS)
7 · GHS07,GHS08,GHS09
Signal word
Warning
Hazard statements
303 · H303-H315-H361-H373-H336-H411
Precautionary statements
501 · P501-P273-P202-P260-P201-P271-P264-P280-P302+P352-P312-P391-P362+P364-P332+P313-P304+P340+P312-P403+P233-P405
PPE
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
Hazard Codes
Xi
Risk Statements
36 · 36/37/38
Safety Statements
23 · 23-24/25
RIDADR
2810 · UN 2810
WGK Germany
2 · 2
RTECS
730000 · XT0730000
Autoignition Temperature
450 °C · >450 °C
Hazard Note
Harmful
TSCA
TSCA listed
HazardClass
9 · 9
PackingGroup
III
HS Code
2903999090 · 2903999090
Storage Class
10 · 10 - Combustible liquids
Hazard Classifications
2 · Aquatic Chronic 2
Hazardous Substances Data
95 · 95-73-8(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in Rabbit: 2400 mg/kg
REACH Registrations
Active

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 5.8% (4 of 69) of reports.

Warning

H315 (27.5%): Causes skin irritation [Warning Skin corrosion/irritation]

P203, P261, P264, P271, P273, P280, P302+P352, P304+P340, P318, P319, P321, P332+P317, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 69 reports by companies from 10 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Warning

Hazard information

Regulatory Information · 2 items

Chemical: Benzene, 2,4-dichloro-1-methyl-

REACH registered substance: 2,4-dichlorotoluene (EC: 202-445-8)

DOT LabelPoison
Fire Hazards · 2 items

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:

Combustible. Gives off irritating or toxic fumes (or gases) in a fire. Above 87 °C explosive vapour/air mixtures may be formed.

Fire Potential · 2 items

COMBUSTIBLE /DICHLOROTOLUENE/

Fire point: 383 °F, open cup

Health HazardsExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
Hazards Summary · 2 items

May be a strong irritant; [HSDB] In high-dose animal studies, causes somnolence, elevation of liver enzymes, fatty liver degeneration, and acute tubular necrosis; [RTECS]

The major hazards encountered in the use and handling of 2,4-dichlorotoluene stem from its toxicologic properties and flammability. Exposure to 2,4-dichlorotoluene may occur via inhalation or dermal routes, primarily resulting from occupational activities including those associated with its use as a high boiling solvent and as an intermediate in organic synthesis. Because it is a strong irritant, personnel involved with 2,4-dichlorotoluene should wear boots, protective gloves, and goggles, at a minimum. Avoid breathing vapor or, to enter a contaminated area freely, wear full face mask self-contained breathing apparatus which provides eye protection. Broken packages containing 2,4-dichlorotoluene should not be handled without protective equipment. Any of this material which contacts the body must be washed away with copious amounts of water. While substance must be moderately heated before ignition occurs (flashpoint: 199 °F, open cup), 2,4-dichlorotoluene is, nevertheless, considered a combustion hazard. Normal fire fighting procedures may be employed, which includes the use of "alcohol" foam, or dry chemical extinguishing agents. Water also may be used in flooding quantities as a fog or spray (solid streams may be ineffective) to extinguish the fire or cool containers. Application of water should be from as far a distance as possible. This substance is considered to be normally stable, even under fire exposure conditions. Nonetheless, it should be stored away from sparks, flames, or other sources ignition. Shipping regulations and other DOT regulatory requirements should be consulted before transport. If 2,4-dichlorotoluene spills, keep material out of water sources and sewers; building dikes to contain the flow as necessary. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance.

Reactive GroupAryl Halides
UN ClassificationUN Hazard Class: 9; UN Pack Group: III
Special Reports · 2 items

Shafer KH et al; Anal Chem 56 (2): 237-40 (1984). Detection of aromatic hydrocarbons in hazardous waste, by gas chromatography-Fourier transform IR spectometry and by gas chromatography-mass spectometry.

Sixt S et al; Chemosphere 30 (12): 2397-414 (1995). The acute toxicity to Photobacterium phosphoreum (Microtox test) of a set of 80 chlorinated compounds, containing aliphatics, benzenes, toluenes, phenols and anilines, was investigated using 'Theoretical Linear Solvation Energy Relationship' parameters. Quantitative Structure Activity Relationships were developed for chemical and toxicological subsets. Molecular volume revealed to be the most important Theoretical Linear Solvation Energy Relationship descriptor. For the complete data set and for the phenols the Theoretical Linear Solvation Energy Relationship descriptors are superior to log P alone. In the case of the phenols this is related to electronic information being inherent in the electrostatic parameter q-, which is correlated to the pKa of the compounds. For the benzenes a quadratic term in Vmc was very useful for the description of the toxicity, Many of the chlorinated aliphatics do not fit the narcosis II Quantitative Structural Activity Relationship. Enhanced chemical reactivity due to the chlorine substitution may lead to activation or biodegradation of these compounds. The attempt to establish narcosis II Quantitative Structural Activity Relationships for the polar narcotic chloroanilines and -phenols was unsuccessful. It seems that some chloroanilines interact directly with the bioluminescence system of P. phosphoreum. The authors emphasize that the concept of baseline narcosis implies that the pure narcosis II mechanism decreases with increasing log P. The site of toxic action for narcosis II is therefore thought to be hydrophilic. Uncoupling of oxidative phosphorylation seems to play a minor role in the photobacterium than it does in fish. Reasons for this may be the ability of bacteria to crack and detoxify aromatic rings or the relative robustness of oxidative phosphorylation in bacteria.

Reactivity Profile · 1 item

Simple aromatic halogenated organic compounds, such as 2,4-DICHLOROTOLUENE, are very unreactive. Halogenated organics generally become less reactive as more of their hydrogen atoms are replaced with halogen atoms. Materials in this group may be incompatible with strong oxidizing and reducing agents. Also, they may be incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.

Chemical DangersDecomposes on heating. This produces carbon monoxide and vinyl chloride. Reacts violently with strong oxidants and strong bases.
Physical DangersAs a result of flow, agitation, etc., electrostatic charges can be generated.

Safety & protection

Fire Fighting · 2 items

To extinguish a fire involving this chemical you may use a dry chemical, carbon dioxide, foam or halon extinguisher; a water spray may also be used. (NTP, 1992)

Use carbon dioxide, powder, water spray.

First Aid Measures · 4 items

Fresh air, rest.

Rinse and then wash skin with water and soap.

Rinse with plenty of water (remove contact lenses if easily possible).

Rinse mouth.

First Aid · 1 item

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Safe StorageProvision to contain effluent from fire extinguishing. Separated from strong bases and strong oxidants. Cool. Keep in a well-ventilated room. Store in an area without drain or sewer access.
Fire Fighting Procedures · 1 item

If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped or safely confined. Use water in flooding quantities as fog. Solid streams of water may spread fire. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbon dioxide. /Chlorotoluenes/

Nonfire Spill Response · 1 item

SMALL SPILLS AND LEAKAGE: If you spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Disposal Methods · 1 item

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Spillage Disposal · 1 item

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Remove vapour with fine water spray.

Preventive Measures · 3 items

AVOID PROLONGED BREATHING OF VAPOR. USE WITH ADEQUATE VENTILATION. /4-Chlorotoluene/

If material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Use water spray to knock-down vapors. /Chlorotoluenes/

Personnel protection: Avoid breathing vapors. Keep upwind. ... Do not handle broken packages unless wearing appropriate personal protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water. /Chlorotoluenes/

Isolation and EvacuationExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
Eye PreventionWear safety goggles.
Fire PreventionNO open flames. Above 87 °C use a closed system and ventilation.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 4,800(SRC), determined from a measured log Kow(2) and a recommended regression-derived equation(3), indicates that 2,4-dichlorotoluene will have only slight mobility in soil(SRC). 2,4-Dichlorotoluene was found to be susceptible to anaerobic biodegradation in soil slurry microcosms under methanogenic conditions; complete degradation required 130 days(4). The predominant product of this reaction was 4-chlorotoluene, a small amount of 2-chlorotoluene was also produced(4). Volatilization of 2,4-dichlorotoluene may be important from moist soil surfaces(SRC) given an estimated Henry's Law constant of 4.2X10-3 atm-cu m/mole(SRC), using a recommended regression equation(5) and from dry soil surfaces(SRC) based on a measured vapor pressure of 0.458 mm Hg(6).

AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 4,800(SRC), determined from a measured log Kow(2) and a recommended regression-derived equation(1), indicates that 2,4-dichlorotoluene may adsorb to suspended solids and sediment in water(SRC). Based on limited data, this compound may biodegrade under anaerobic conditions(SRC). 2,4-Dichlorotoluene was found to be susceptible to anaerobic biodegradation in soil slurry microcosms under methanogenic conditions; complete degradation required 130 days(3). The predominant product of this reaction was 4-chlorotoluene, a small amount of 2-chlorotoluene was also produced(3). 2,4-Dichlorotoluene may volatilize from water surfaces based on an estimated Henry's Law constant of 4.2X10-3 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Estimated half-lives for a model river and model lake are 4 hours and 5 days, respectively(1,SRC), although adsorption to sediment or suspended material in water may attenuate this process(SRC). An estimated BCF value of 1000(1,SRC), from a measured log Kow(2), suggests that 2,4-dichlorotoluene will bioconcentrate in aquatic organisms(SRC), according to a recommended classification scheme(5). The half-life of 2,4-dichlorotoluene in the Rhine River in The Netherlands is 1 day as determined by measuring concentration differences over a reach of the river(6,SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2,4-dichlorotoluene, which has a measured vapor pressure of 0.458 mm Hg at 25 °C(2), should exist solely as a vapor in the ambient atmosphere. Vapor-phase 2,4-dichlorotoluene is degraded in the atmosphere by reaction with photochemically produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 12 days(3,SRC).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Signs and SymptomsRedness.
Effluent Concentrations · 1 item

In a comprehensive survey of wastewater from 4000 industrial and publicly owned treatment works (POTWs) sponsored by the Effluent Guidelines Division of the U.S. EPA, 2,4-dichlorotoluene was identified in discharges of the following industrial categories (frequency of occurrence, median concn in ppb): rubber processing (1; 314.9), organic chemicals (11; 20.9), publicly owned treatment works (5; 40.4)(1). The highest effluent concn was 1424 ppb in the paint and ink industry(1). 2,4-Dichlorotoluene has been detected, but not quantified, in water samples at the Love Canal(2).

ICSC Environmental DataThe substance is toxic to aquatic organisms. It is strongly advised not to let the chemical enter into the environment.
Soil Adsorption/Mobility · 1 item

The Koc of 2,4-dichlorotoluene is estimated as approximately 4,800(SRC), using a measured log Kow of 4.24(1) and a regression-derived equation(2,SRC). According to a recommended classification scheme(3), this estimated Koc value suggests that 2,4-dichlorotoluene will have only slight mobility in soil(SRC).

TSCA Test Submissions · 1 item

2,4-Dichlorotoluene (CAS # 95-73-8) was evaluated for acute oral toxicity. The test substance was administered by oral intubation to male albino rats (2/group) at dosage levels of 100, 215, 464, 1000, 2150, and 4640 mg/kg of body weight. No mortality occurred. At 4640 mg/kg, toxic effects included prostration and tremors followed by depression, ataxia, labored respiration, blood-like crust around nostril, urine stains, and rough haircoat at 24- hours. Toxic effects gradually subsided, but rough coat persisted until termination.

Atmospheric ConcentrationsSOURCE AREAS: 2,4-Dichlorotoluene has been detected but not quantified in air samples at the Love Canal(1).
Human Toxicity ExcerptsMAY BE TOXIC & IRRITANT /DICHLOROTOLUENE/
Artificial Pollution Sources · 1 item

2,4-Dichlorotoluene's production and use as an intermediate in the manufacture of fungicides, dyes, pharmaceuticals, preservatives, and peroxides(1) or for the manufacture of 2,4-dichlorobenzyl chloride and 2,4-dichlorobenzoyl chloride(2) may result in its release to the environment through various waste streams(SRC).

Environmental Biodegradation · 1 item

2,4-Dichlorotoluene was found to be susceptible to anaerobic metabolism in soil slurry microcosms under methanogenic conditions. 2,4-Dichlorotoluene, at an initial concentration of 800 uM was completely degraded after 130 days; 50% degradation required about 90 days. The predominant product of this reaction was 4-chlorotoluene, a small amount of 2-chlorotoluene was also produced(1).

Sediment/Soil Concentrations2,4-Dichlorotoluene has been detected, but not quantified, in soil/sediment samples at the Love Canal(1).

Safety data

PPE
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
wgk
2
tsca
TSCA listed
rtecs
XT0730000
ridadr
UN 2810
hs_code
2903999090
Toxicity
LD50 orally in Rabbit: 2400 mg/kg
risk_code
36/37/38
Signal word
Warning
Symbol(GHS)
GHS07,GHS08,GHS09
hazard_code
Xi
hazard_note
Harmful
safety_code
23-24/25
hazard_class
9
Storage Class
10 - Combustible liquids
packing_group
III
Hazard statements
H303-H315-H361-H373-H336-H411
REACH Registrations
Active
Hazard Classifications
Aquatic Chronic 2
Autoignition Temperature
>450 °C
Precautionary statements
P501-P273-P202-P260-P201-P271-P264-P280-P302+P352-P312-P391-P362+P364-P332+P313-P304+P340+P312-P403+P233-P405
Hazardous Substances Data
95-73-8(Hazardous Substances Data)

Chemistry & industry

Uses & manufacturing

Uses · 4 items

Used as a high-boiling solvent and an intermediate (pesticides, fungicides, dyes, pharmaceuticals, preservatives, and peroxides); [HSDB]

HIGH BOILING SOLVENT; INTERMEDIATE FOR ORG SYNTHESIS /DICHLOROTOLUENE/

2,4-Dichlorotoluene is used as a herbicide intermediate & for the manufacture of 2,4-dichlorobenzyl chloride and 2,4-dichlorobenzoyl chloride.

2,4-Dichlorotoluene is used via its side-chain-chlorinated intermediates to produce fungicides, dyes, pharmaceuticals, preservatives, and peroxides (curing agents for silicones and polyesters).

ImpuritiesTypical analysis for 2,4-dichlorotoluene is >99% 2,4-dichlorotoluene, <0.2% 4-chlorotoluene, <0.3% 2,5-dichlorotoluene, <0.1% 2,6-dichlorotoluene, <0.4% 3,4-dichlorotoluene.
Methods of Manufacturing · 2 items

2,4-Dichlorotoluene represents 80-85% of the dichlorotoluene fraction in chlorination of p-chlorotoluene with antimony trichloride or zirconium tetrachloride catalysts. It is separated from 3,4-dichlorotoluene by fractional distillation.

Chlorination of 4-chlorotoluene in the presence of ring chlorination catalysts (eg chlorides of iron, antimony, or zirconium) leads to 2,4- and 3,4-dichlorotoluene in a ratio of ca. 4:1; the two can be separated by fractional distillation. Only traces of other dichlorotoluenes are formed. ... 2-Chlorotoluene is converted primarily into 2,4-dichlorotoluene when sulfuryl chloride is used as the chlorinating agent.

Formulations/PreparationsPurity: 99.0%
General Manufacturing InformationBenzene, 2,4-dichloro-1-methyl-: ACTIVE
Applications · 2 items

Uses2,4-Dichlorotoluene was used as an oxidant and a solvent during anaerobic catalytic oxidation of secondary alcohols by using an in situ (N-heterocyclic carbene)-Ni(0) system. It was used as growth supplement in the culture media of Ralstonia sp. strain PS12. It was used to develop a sensitive method based on solid-phase microextraction followed by gas chromatography-tandem mass spectrometry for the analysis of chlorotoluenes in water samples.

General DescriptionClear colorless liquid.

Preparation methods · 1 item

Preparation2,4-Dichlorotoluene is synthesized by diazotization and chlorination with 2,4-diaminotoluene as raw material. First, hydrochloric acid and water into the reaction pot, heated to 50°C, stirring under the dissolution of 2,4-diaminotoluene, then hydrochloric acid and cuprous chloride into the pot, the 1% sodium nitrite solution evenly added, the temperature is maintained at about 60°C, resting stratification, the lower layer of crude product washed with water to neutral, add alkali to alkaline, and then water to remove the alkali, divided 2,4-dichlorotoluene crude product, water distillation of finished products.

Upstream & downstream products

Upstream raw materials

2-Nitrotoluene2-(5-methyl-2-propan-2-yl-phenoxy)ethanamine2-Chloro-6-nitrotoluene2,3-Dichlorotoluene2,4-DiaminotolueneSulfuryl chlorideCopper(I) chloride5-Chloro-2-methylaniline3,4-Dichlorotoluene3-chloro-4-toluidine2-Chlorotoluene4-Chloro-2-nitrotoluene4-Chlorotoluene

Downstream products

alpha,alpha,2,4-Tetrachlorotoluene6,9-Dichloro-2-methoxyacridineCiprofloxacin4-Chloro-2-(4-methoxy-phenylamino)-benzoic acid2,4-Dichlorobenzoic acid2,4-Dichlorobenzaldehyde2,4-Dichlorobenzyl chloride2,4-Dichlorobenzoyl chloride2,4-Dichlorophenylacetonitrile2,4,5-Trichlorotoluene2,5-Dichlorotoluene

Additional notes

DefinitionChEBI: 2,4-Dichlorotoluene is a dichlorobenzene.

Related reactions

14 records
New reaction record
HRID 231410 reaction equation
HRID 231410As reactant
HRID 326178 reaction equation
HRID 326178As reactant
HRID 579888 reaction equation
HRID 579888As reactant
HRID 648988 reaction equation
HRID 648988As reactant
HRID 689245 reaction equation
HRID 689245As reactant
HRID 750793 reaction equation
HRID 750793As reactant
HRID 952533 reaction equation
HRID 952533As reactant
HRID 1116740 reaction equation
HRID 1116740As reactant
PreviousPage 1 of 2

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes