HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

2,4-Dichlorotoluene → Toluene chlorotoluene

HRID 579888
Print

Reaction equation

HRID 579888 reaction equation
[Cl:1][C:2]1[CH:7]=[C:6](Cl)[CH:5]=[CH:4][C:3]=1[CH3:9]>[Pd].C1(C)C=CC=CC=1>[C:3]1([CH3:9])[CH:4]=[CH:5][CH:6]=[CH:7][CH:2]=1.[Cl:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][C:3]=1[CH3:9]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

4

Reactant 1

HCID 72542,4-Dichlorotoluene

Product 1

HCID 19853488Toluene chlorotoluene

Reagents, catalysts & solvents 2

HCID 23938PalladiumCatalyst2×HCID 1140TolueneSolvent

Procedure

This example shows the utility of sulfided noble metals as a dehalogenation catalyst for substituted chlorobenzenes. The catalyst used was 0.5% palladium on 1/8" alumina. 2,4-Dichlorotoluene was used as the feed and the feed rate was maintained at about 1.25 g/min. The dehalogenation reaction catalysed by non-sulfided palladium at a temperature of 300° C. was found to be very vigorous. Up to 81% toluene was formed during such dehalogenation, yielding a mole ratio of toluene-chlorotoluene of 4.24. When the dehalogenation was catalysed by a sulfided palladium, the reaction rate was reduced considerably and the selectivity to chlorotoluene was improved. Only 41% toluene was found in the dehalogenated product which corresponded to a toluene/chlorotoluene mole ratio of 1.19. Thus sulfided palladium was found to be effective in improving selectivity to substituted chlorobenzene.

Workup

  1. temperaturethe feed rate was maintained at about 1.25 g/min

Sources & evidence

ORD record
ord-7ab1cedbc4f348f9bafae577506e4754
Source dataset
uspto-grants-1988_06
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US04749817

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes