HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Triethylamine

HCID 8471
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
121-44-8
Standard SMILES
CCN(CC)CC
InChIKey
ZMANZCXQSJIPKH-UHFFFAOYSA-N
Molecular formula
C6H15N
Average molar mass
101.19 g/mol
Monoisotopic mass
101.12044948

Overview

Triethylamine appears as a clear colorless liquid with a strong ammonia to fish-like odor. Flash point 20 °F. Vapors irritate the eyes and mucous membranes. Less dense (6.1 lb / gal) than water. Vapors heavier than air. Produces toxic oxides of nitrogen when burned.

Names & identifiers

Preferred name
Triethylamine
IUPAC
N,N-diethylethanamine
English name
Triethylamine
Molecular formula
C6H15N
Molecular weight
101.19

Names & synonyms

TRIETHYLAMINE121-44-8N,N-Diethylethanamine(Diethylamino)ethaneEthanamine, N,N-diethyl-TriaethylaminTrietilaminaDTXSID3024366VOU728O6AYFEMA NO. 4246TEN (Base)TEN [Base]
Show more names
TEAEt3NTEN(C2H5)3NTRIETHYLAMINE ANHYDROUSTETN
DTXCID204366CHEBI:35026RefChem:899489204-469-4Triethylamintriethyl amineN,N,N-TriethylamineNEt3

Database identifiers

CAS
121-44-8
PubChem CID
8471
DTXSID
DTXSID3024366
ChEMBL
CHEMBL284057
ChEBI
CHEBI:35026
UNII
VOU728O6AY
EC Number
204-469-4
Nikkaji
J2.485F

Properties

Computed structural properties

XLogP
1.4
Topological polar surface area
3.2 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
1
Rotatable bonds
3
Heavy atoms
7
Formal charge
0
Complexity
25.7

Experimental & physicochemical properties

Chemical Classes · 3 items

Hazardous Air Pollutants (HAPs)

Nitrogen Compounds -> Amines, Aliphatic

Flammable agents - 3rd degree

PFASPFAS -> Other/unspecified
SpringerMaterials Properties15N nuclear magnetic resonance spectrum
PesticidesPesticide -> EPA IRIS
LogP · 4 items

log Kow = 1.45

1.45

1.45

1.36

Odor · 2 items

Strong, ammoniacal ordor

Fishy

Food AdditivesFLAVORING AGENT OR ADJUVANT -> FDA Substance added to food
Density · 6 items

0.729 at 68 °F (USCG, 1999) - Less dense than water; will float

0.7275 g/cu cm at 20 °C

Bulk density: 6.1 lb/gal

Saturated liquid density: 45.420 lb/cu ft; liquid heat capacity: 0.556 Btu/lb °F; saturated vapor pressure: 1.084 lb/sq in; saturated vapor density: 0.01930 lb/cu ft (all at 70 °F)

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H225: Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P260, P261, P262, P264, P264+P265, P270, P271, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P317, P321, P330, P361+P364, P363, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

This chemical does not meet GHS hazard criteria for < 0.1% (2 of 5716) of reports.

Danger

H225 (> 99.9%): Highly Flammable liquid and vapor [Danger Flammable liquids]

Hazard information

Regulatory Information · 6 items

Chemical: Ethanamine, N,N-diethyl-

Hazard Traits - Neurotoxicity; Ocular Toxicity; Respiratory Toxicity

Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)

Ethanamine, N,N-diethyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Ethanamine, N,N-diethyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Triethylamine (EC: 204-469-4)

Ethanamine, N,N-diethyl-: HSNO Approval: HSR001228 Approved with controls

Other Safety InformationIMAP assessments - Short chain (C2-3) alkyl amines: Human health tier II assessment
DOT LabelFlammable Liquid Corrosive
Fire Hazards · 3 items

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:

· Flammable/combustible material.

Highly flammable. Gives off irritating or toxic fumes (or gases) in a fire. Vapour/air mixtures are explosive.

Chemistry & industry

Pharmacology

Biological Half-Life · 3 items

After oral dose of triethylamine to four men, triethylamine in plasma had a half-life of about 3 hr (range, 2.4-3.5 hr).

Plasma half-life after inhalation exposure to five volunteers was 3.2 hr.

In 20 workers studied before, during, and after exposure to triethylamine (TEA) in a polyurethane-foam producing plant the amount of TEA and its metabolite triethylamine-N-oxide (TEAO) excreted in urine corresponded to an average of 80% of the inhaled amount. ... The data indicate half-lives for TEA and TEAO excretion in urine of about 3 hr.

Metabolism/Metabolites · 3 items

There have been few studies on the metabolism of industrially important aliphatic amines such as triethylamine. It is generally assumed that amines not normally present in the body are metabolized by monoamine oxidase and diamine oxidase (histaminase). Monoamine oxidase catalyzes the deamination of primary, secondary, and tertiary amines. ... Ultimately ammonia is formed and will be converted to urea. The hydrogen peroxide formed is acted upon by catalase and the aldehyde formed is thought to be converted to the corresponding carboxylic acid by the action of aldehyde oxidase.

Five healthy volunteers were exposed by inhalation to triethylamine (TEA; four or eight hours at about 10, 20, 35, and 50 mg/cu m), a compound widely used as a curing agent in polyurethane systems. Analysis of plasma and urine showed that an average of 24% of the TEA was biotransformed into triethylamine-N-oxide (TEAO) but with a wide interindividual variation (15-36%). The TEA and TEAO were quantitatively eliminated in the urine. The plasma and urinary concentrations of TEA and TEAO decreased rapidly after the end of exposure (average half time of TEA was 3.2 hr).

In 20 workers studied before, during, and after exposure to triethylamine (TEA) in a polyurethane-foam producing plant the amount of TEA and its metabolite triethylamine-N-oxide (TEAO) excreted in urine corresponded to an average of 80% of the inhaled amount. An average of 27% was TEAO, but with a pronounced interindividual variation. Older subjects excreted more than younger ones; less than 0.3% was excreted as diethylamine.

Absorption, Distribution and Excretion · 3 items

The pharmacokinetics of the industrially important compound triethylamine (TEA) and its metabolite triethylamine-N-oxide (TEAO) were studied in four volunteers after oral and intravenous administration. TEA was efficiently absorbed from the gastrointestinal (GI) tract, rapidly distributed, and in part metabolized into TEAO. There was no significant first pass metabolism. TEAO was also well absorbed from the GI tract. Within the GI tract, TEAO was reduced into TEA (19%) and dealkylated into diethylamine (DEA; 10%). The apparent volumes of distribution during the elimination phase were 192 liters for TEA and 103 liters for TEAO. Gastric intubation showed that there was a close association between levels of TEA in plasma and gastric juice, the latter levels being 30 times higher. The TEA and TEAO in plasma had half-lives of about 3 and 4 hr, respectively. Exhalation of TEA was minimal. More than 90% of the dose was recovered in the urine as TEA and TEAO. The urinary clearances of TEA and TEAO indicated that in addition to glomerular filtration, tubular secretion takes place. For TEAO at high levels, the secretion appears to be saturable. The present data, in combination with those of earlier studies, indicate that the sum of TEA and TEAO in urine may be used for biological monitoring of exposure to TEA.

Related reactions

161,230 records
New reaction record
HRID 302 reaction equation
HRID 302As reagent
HRID 766 reaction equation
HRID 766As solvent
HRID 771 reaction equation
HRID 771As reactant
HRID 772 reaction equation
HRID 772As reactant
HRID 849 reaction equation
HRID 849As reactant
HRID 856 reaction equation
HRID 856As reactant
HRID 863 reaction equation
HRID 863As reactant
HRID 876 reaction equation
HRID 876As reactant
PreviousPage 1 of 20154

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

Relative density (water = 1): 0.7

0.724-0.730

Flavoring AgentsEU Flavoring substances
Viscosity0.347 mPa.s at 25 °C
Color/FormColorless liquid
Solubility · 6 items

Soluble (NTP, 1992)

In water, 6.86X10+4 mg/L at 25 °C

Miscible with water below 18.7 °C

Soluble in ethanol, carbon tetrachloride, ethyl ether; very soluble in acetone, benzene, chloroform

Soluble in fixed oils, mineral oil, oleic and stearic acids and in hot carnauba and paraffin waxes.

For more Solubility (Complete) data for TRIETHYLAMINE (6 total), please visit the HSDB record page.

Physicochemical properties

Melting point
114.7 °C; · −114.70 °C; −174.46 °F; 158.45 K
Boiling point
88.6 to · 88.6 to 89.8 °C; 191.4 to 193.5 °F; 361.7 to 362.9 K
Density
0.7255 g · 0.7255 g mL−1
vapor density
3.5 · 3.5 (vs air)
vapor pressure
51.75 mm · 51.75 mm Hg ( 20 °C)
FEMA
4246 · 4246 | TRIETHYLAMINE
refractive index
1.401 · 1.401
FLAVIS Number
11.023 · 11.023 | Triethylamine
Flash point
15 °C · −15 °C (5 °F; 258 K)
storage temp.
30 °C · Store below +30°C.
solubility
112 g/L · water: soluble112g/L at 20°C
pka
10.75 · 10.75(at 25℃)
form
liquid
color
Colourless
Specific Gravity
0.725 · 0.725 (20/4℃)
Relative polarity
1.8 · 1.8
PH
12.7 · 12.7 (100g/l, H2O, 15℃)(IUCLID)
Odor
Strong ammonia-like odor
Odor Type
fishy
Odor Threshold
0.0054 ppm · 0.0054ppm
explosive limit
1.2 · 1.2-9.3%(V)
Evaporation Rate
5.6 · 5.6
Water Solubility
133 g/L · 133 g/L (20 ºC)
Thermal Conductivity
0.117 W/ · 0.117 W/(m·K) at 25 ℃
Specific Heat Capacity
2.17 J/ · Cp(liquid): 2.17 J/(g·K), at 25℃
JECFA Number
1611 · 1611
Merck
14 · 14,9666
BRN
1843166 · 1843166
Henry's Law Constant
1.79 at · 1.79 at 25 °C (Christie and Crisp, 1967)
Dielectric constant
5 · 5.0(Ambient)
Exposure limits
0.5 ppm · ACGIH TLV-TWA:0.5 ppm (2.07 mg/m3);TLV-STEL:1 ppm (4.14 mg/m3)OSHA PEL-TWA:25 ppm (100 mg/m³)NIOSH IDLH:200 ppm
Stability
Stable. Extremely flammable. Readily forms explosive mixtures with air. Note low flash point. Incompatible with strong oxidizing agents, strong acids, ketones, aldehydes, halogenated hydrocarbons.
Cosmetics Ingredients Functions
EMULSION STABILISING
InChI
1S/C6H15N/c1-4-7(5-2)6-3/h4-6H2,1-3H3
InChIKey
ZMANZCXQSJIPKH-UHFFFAOYSA-N
SMILES
CCN(CC)CC
LogP
1.65 · 1.65
CAS DataBase Reference
121 · 121-44-8(CAS DataBase Reference)
Substances Added to Food (formerly EAFUS)
TRIETHYLAMINE
FDA 21 CFR
175.105 · 175.105; 177.1580; 177.1585
EWG's Food Scores
5 · 5-6
FDA UNII
728 O6AY · VOU728O6AY
NIST Chemistry Reference
Triethylamine(121-44-8)
EPA Substance Registry System
Triethylamine (121-44-8)
Absorption
278 nm · cut-off at 278nm
UNSPSC Code
85151701 · 85151701
NACRES
21 · NB.21
Symbol(GHS)
2 · GHS02,GHS05,GHS06,GHS08
Signal word
Danger
Hazard statements
301 · H301+H311+H331-H314-H370-H373-H335-H401-H412-H225
Precautionary statements
501 · P501-P273-P270-P240-P260-P210-P233-P243-P241-P242-P271-P264-P280-P370+P378-P308+P311-P361+P364-P303+P361+P353-P301+P330+P331-P301+P310+P330-P304+P340+P310-P305+P351+P338+P310-P403+P233-P403+P235-P405
target organs
Respiratory system
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Hazard Codes
F,C
Risk Statements
11 · 11-20/21/22-35
Safety Statements
3 · 3-16-26-29-36/37/39-45-61
RIDADR
1296 · UN 1296
WGK Germany
1 · 1
RTECS
175000 · YE0175000
F
34 · 34
Autoignition Temperature
593 °F · 593 °F
Hazard Note
Highly Flammable/Corrosive
TSCA
TSCA listed
HazardClass
3 · 3
PackingGroup
II
HS Code
2921199011 · 2921199011
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
3 DermalAcute · Acute Tox. 3 DermalAcute Tox. 3 InhalationAcute Tox. 3 OralEye Dam. 1Flam. Liq. 2Skin Corr. 1ASTOT SE 3
Hazardous Substances Data
121 · 121-44-8(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in rats: 0.46 g/kg (Smyth)
IDLA
200 ppm · 200 ppm
REACH Registrations
Active
Limited Quantities
1 L · 1.0 L (0.3 gallon) (liquid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
Fire Potential · 2 items

A very dangerous fire hazard when exposed to heat, flame, or oxidizers.

Contact with strong oxidizers may cause fires ... .

Health Hazards · 2 items

Vapors irritate nose, throat, and lungs, causing coughing, choking, and difficult breathing. Contact with eyes causes severe burns. Clothing wet with chemical causes skin burns. (USCG, 1999)

· May cause toxic effects if inhaled or ingested.

Hazards Summary · 2 items

Acute (short-term) exposure of humans to triethylamine vapor causes eye irritation, corneal swelling, and halo vision. People have complained of seeing "blue haze" or having "smoky vision." These effects have been reversible upon cessation of exposure. Acute exposure can irritate the skin and mucous membranes in humans. Chronic (long-term) exposure of workers to triethylamine vapor has been observed to cause reversible corneal edema. Chronic inhalation exposure has resulted in respiratory and hematological effects and eye lesions in rats and rabbits. No information is available on the reproductive, developmental, or carcinogenic effects of triethylamine in humans. EPA has not classified triethylamine with respect to potential carcinogenicity.

TLV Basis is visual impairment and upper respiratory tract irritation; Transient visual disturbances with blurring and halo vision are reported to occur at 3 to 4 ppm but not at 1 to 1.25 ppm. Mice that inhaled lethal concentrations had respiratory irritation, tremors, and convulsions. [ACGIH] Liquid causes first degree burns on short exposure; [CHRIS] Corrosive to skin; [Quick CPC] Short-term exposure at high concentrations may cause pulmonary edema. [ICSC] May cause permanent eye injury; Transient visual effects (blue haze or halo vision) occur at low concentrations; [CHEMINFO] Experimental animals exposed repeatedly to 100 ppm show evidence of liver, kidney, lung, and heart damage. [HSDB] A corrosive substance that can cause pulmonary edema; [ICSC]

DOT ID and Guide · 2 items

1296 132

1296 132

Reactive GroupAmines, Phosphines, and Pyridines
EC ClassificationSymbol: F, C; R: 11-20/21/22-35; S: (1/2)-3-16-26-29-36/37/39-45
UN ClassificationUN Hazard Class: 3; UN Subsidiary Risks: 8; UN Pack Group: II
RCRA Requirements · 2 items

U404; As stipulated in 40 CFR 261.33, when triethylamine, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).

D001; A solid waste containing triethylamine may become characterized as a hazardous waste when subjected to testing for ignitability as stipulated in 40 CFR 261.21, and if so characterized, must be managed as a hazardous waste.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:

Use alcohol-resistant foam, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.

First Aid Measures · 4 items

Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention .

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 3 items

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

General First Aid:

(General first aid procedures)

Safe StorageFireproof. Separated from incompatible materials and food and feedstuffs. See Chemical Dangers.
Firefighting HazardsVapors are heavier than air and may travel to a source of ignition and flash back.
Exposure Control and Personal Protection · 3 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

184.0 [ppm]

1.0 [ppm]

Fire Fighting Procedures · 5 items

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.

Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.

Use water spray to cool unopened containers.

Use water spray to keep fire-exposed containers cool. Use water spray, dry chemical, "alcohol resistant" foam, or carbon dioxide.

For more Fire Fighting Procedures (Complete) data for TRIETHYLAMINE (6 total), please visit the HSDB record page.

Storage Conditions · 2 items

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Storage class (TRGS 510): Flammable liquids.

Avoid oxidizing materials, acids, and sources of halogens. Store in cool, dry, well-ventilated location.

Cleanup Methods · 5 items

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up: Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations.

1. Remove all ignition sources. 2. Ventilate area of spill or leak. For small quantities, absorb on paper towels. Evaporate in a safe place (such as a fume hood). Allow sufficient time for evaporating vapors to completely clear the hood ductwork. Burn the paper in a suitable location away from combustible materials. Large quantities can be collected and atomized in a suitable combustion chamber equipped with an appropriate effluent gas cleaning device.

Environmental considerations-land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Apply "universal" gelling agent to immobilize spill. Neutralize with sodium bisulfate (NaHSO4).

Environmental considerations-water spill: Add sodium bisulfate (NaHSO4). If dissolved, in region of 10 ppm or greater concentration, apply activated carbon at ten times the spilled amount. Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.

Environmental considerations-air spill: Apply water spray or mist to knock down vapors. Vapor knockdown water is corrosive or toxic and should be diked for containment.

Nonfire Spill ResponseExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
Disposal Methods · 5 items

Generators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number U404 and D001, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste.

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Product: Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material; Contaminated packaging: Dispose of as unused product.

Deodorization by catalytic combustion of triethylamine was studied.

/Absorb small spills with paper and/ burn the paper in a suitable location away from combustible materials. Large quantities can be reclaimed or collected & atomized in suitable combustion chamber equipped with appropriate effluent gas cleaning device.

Toxicology

Body BurdenTriethylamine was detected in the plasma of patients with gastroesophageal reflux disease and esophageal adenocarcinoma(1).
Target Organs · 2 items

Respiratory

Eyes, skin, respiratory system, cardiovascular system, liver, kidneys

Ecotoxicity Values · 5 items

LC50; Species: Primephales promelas (fathead minnow); Concentration: 44 mg/L for 96 hr /conditions of bioassay not specified/

LC50; Species: Oryzias latipes /Medaka/; Concentration: 720 mg/L for 48 hr /conditions of bioassay not specified/

EC50; Species: Danio rerio (Zebra danio) fertilized egg; Conditions: freshwater, renewal, 25 °C, pH 8.4, dissolved oxygen 8.1 mg/L; Concentration: 53000 ug/L for 7 days (95% confidence interval: 39000-73000 ug/L); Effect: teratogenic measurements /> or =99% purity/

EC50; Species: Oncorhynchus mykiss (Rainbow trout) fertilized egg; Conditions: freshwater, renewal, 10 °C; Concentration: 130000 ug/L for 60 days (95% confidence interval: 96000-176000 ug/L); Effect: teratogenic measurements /> or =99% purity/

For more Ecotoxicity Values (Complete) data for TRIETHYLAMINE (8 total), please visit the HSDB record page.

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 51(SRC), determined from a structure estimation method(2), indicates that triethylamine is expected to have high mobility in soil(SRC). The pKa of triethylamine is 10.78(3), indicating that this compound will exist almost entirely in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of the cation from moist soil is not expected because cations do not volatilize(SRC). Triethylamine is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 57.07 mm Hg at 25 °C(3). A 28% of Theoretical BOD using activated sludge in the Japanese MITI test(5) suggests that biodegradation may be an important environmental fate process in soil(SRC).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 51(SRC), determined from a structure estimation method(2), indicates that triethylamine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected based upon a pKa of 10.78(3), indicating that triethylamine will exist almost entirely in the cation form and cations do not volatilize(SRC). Triethylamine is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(4). According to a classification scheme(5), BCFs of <4.9(6), suggest bioconcentration in aquatic organisms is low. Triethylamine present at 100 mg/L, reached 28% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(6).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), triethylamine, which has a vapor pressure of 57.07 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase triethylamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 4.2 hours(SRC), calculated from its rate constant of 9.3X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Triethylamine does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC).

Food Survey ValuesTriethylamine has been identified as a volatile component of boiled beef(1).
Adverse EffectsOccupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.
Exposure Routes · 2 items

The substance can be absorbed into the body by inhalation, through the skin and by ingestion.

inhalation, skin absorption, ingestion, skin and/or eye contact

Toxicity Summary · 1 item

IDENTIFICATION AND USE: Triethylamine (TEA) is a colorless liquid. It is used as catalytic solvent in chemical synthesis; accelerator activators for rubber; wetting, penetrating, and waterproofing agents of quaternary ammonium types; curing and hardening of polymers; corrosion inhibitor; propellant. HUMAN EXPOSURE AND TOXICITY: Aside from irritation of the eyes and respiratory tract, triethylamine also stimulates the central nervous system, because it inhibits monamine oxidase. Experimental studies were conducted in four healthy men on the metabolism of inhaled TEA (20 mg/cu m) with and without ethanol ingestion. Three subjects displayed visual disturbances in the experiments without ethanol. These same subjects did not experience any visual disturbances in those experiments containing ethanol. In another study, four hour exposure to a TEA concentration of 3.0 mg/cu m seemed to cause no effects, whereas exposure to 6.5 mg/cu m for the same period caused blurred vision and a decrease in contrast sensitivity. Two volunteers were exposed to various airborne concentrations of triethylamine. Levels of 18 mg/cu m for eight hours caused subjective visual disturbances (haze and halos) and objective corneal edema. The effects faded within hours after the end of exposure. A cross-sectional study of visual disturbances was conducted in 19 workers (13 men, 6 women, mean age 45) employed in a polyurethane foam production plant. Visual disturbances (foggy vision, blue haze, and sometimes halo phemomena) were reported by 5 workers. Symptoms were associated with work operations with the highest exposure to triethylamine (TWA= 12-13 mg/cu m). ANIMAL STUDIES: TEA irritates the mucous membranes and the respiratory tract. In concentrations of 156 ppm a 50% decrease of the respiratory rate in rats was found. A 70% solution applied on the skin of guinea pigs caused prompt skin burns leading to necrosis; when held in contact with guinea pig skin for 2 hr, there was severe skin irritation with extensive necrosis and deep scarring. Five cat eyes and 1 monkey eye were exposed to triethylamine. Animals were exposed to triethylamine at rates of 0.45-0.85 mmol triethylamine/5 min for periods ranging from 1 to 5 min. Corneal epithelial damage occurred at all doses and was severe at higher concentrations. In all cases the epithelium was healed by day 4. Optical discontinuities of the stroma similar to those seen in human patients were observed at all dose levels. Convulsions observed in all rats given oral dosages of 50 mg or more. Triethylamine was tested on 3 day old chicken embryos. Malformations observed were: small eye cup 31%, defects of lids and cornea 73%, defects of beak 4%, encephalocoele or skin pimple in head 23%, open coelom 35%, short back or neck 42%, defects of wings 38%, and edema and lymph blebs 4%. Triethylamine was tested for mutagenicity in the Salmonella/microsome preincubation assay. Triethylamine was tested at doses of 0, 100, 333, 1000, 3333, and 10,000 ug/plate in four Salmonella typhimurium strains (TA98, TA100, TA1535, and TA1537) in the presence and absence of metabolic activation. Triethylamine was negative in these tests.

Signs and Symptoms · 5 items

Cough. Sore throat. Shortness of breath. Laboured breathing. Headache. Dizziness. Weakness. Nausea. Symptoms may be delayed.

Redness. Skin burns. Pain.

Pain. Redness. Blurred vision. Blue haze and halo. Loss of vision. Severe deep burns.

Abdominal pain. Burning sensation. Shock or collapse.

irritation eyes, skin, respiratory system; In Animals: myocardial, kidney, liver damage

Ongoing Test Status · 2 items

EPA has released the Interactive Chemical Safety for Sustainability (iCSS) Dashboard. The iCSS Dashboard provides an interactive tool to explore rapid, automated (or in vitro high-throughput) chemical screening data generated by the Toxicity Forecaster (ToxCast) project and the federal Toxicity Testing in the 21st century (Tox21) collaboration. /The title compound was tested by ToxCast and/or Tox21 assays/[USEPA; ICSS Dashboard Application; Available from, as of July 7, 2016: http://actor.epa.gov/dashboard/]

The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Short-Term Toxicity Studies" and "Genetic Toxicology Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical.[Available from, as of July 28, 2016: http://ntp.niehs.nih.gov/testing/status/agents/ts-11038-a.html]

Effluent Concentrations · 1 item

Triethylamine has been reported in an effluent sample from the plastics and synthetics industry at 356.5 mg/L(1). It is emitted from sewage treatment plants(2). Anthropogenic releases of triethylamine by industry in the US to the atmosphere, surface water, underwater injections, land, and off-site were 2.3X10+5, 2299, 1.3X10+5, 10, and 2961 lbs, respectively, for the year 2014(3).

ICSC Environmental DataThe substance is harmful to aquatic organisms.

Regulatory information

RCRA Requirements · 2 items

U404; As stipulated in 40 CFR 261.33, when triethylamine, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).

D001; A solid waste containing triethylamine may become characterized as a hazardous waste when subjected to testing for ignitability as stipulated in 40 CFR 261.21, and if so characterized, must be managed as a hazardous waste.

TSCA Requirements · 1 item

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Ethanamine, N,N-diethyl- is included on this list. Effective date: 1/13/84; Sunset date: 1/13/94.

Atmospheric Standards · 2 items

This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Triethylamine is produced, as an intermediate or a final product, by process units covered under this subpart.

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Triethylamine is included on this list.

CERCLA Reportable Quantities · 1 item

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 5000 lb or 2270 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

Clean Water Act Requirements · 1 item

Triethylamine is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

Safety data

F
34
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
wgk
1
IDLA
200 ppm
tsca
TSCA listed
rtecs
YE0175000
ridadr
UN 1296
hs_code
2921199011
Toxicity
LD50 orally in rats: 0.46 g/kg (Smyth)
risk_code
11-20/21/22-35
Signal word
Danger
Symbol(GHS)
GHS02,GHS05,GHS06,GHS08
hazard_code
F,C
hazard_note
Highly Flammable/Corrosive
safety_code
3-16-26-29-36/37/39-45-61
hazard_class
3
Storage Class
3 - Flammable liquids
packing_group
II
target organs
Respiratory system
Hazard statements
H301+H311+H331-H314-H370-H373-H335-H401-H412-H225
Limited Quantities
1.0 L (0.3 gallon) (liquid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
REACH Registrations
Active
Hazard Classifications
Acute Tox. 3 DermalAcute Tox. 3 InhalationAcute Tox. 3 OralEye Dam. 1Flam. Liq. 2Skin Corr. 1ASTOT SE 3
Autoignition Temperature
593 °F
Precautionary statements
P501-P273-P270-P240-P260-P210-P233-P243-P241-P242-P271-P264-P280-P370+P378-P308+P311-P361+P364-P303+P361+P353-P301+P330+P331-P301+P310+P330-P304+P340+P310-P305+P351+P338+P310-P403+P233-P403+P235-P405
Hazardous Substances Data
121-44-8(Hazardous Substances Data)

The objectives of the study were to assess triethylamine (TEA) exposure in cold-box core making and to study the applicability of urinary TEA measurement in exposure evaluation. Air samples were collected by pumping of air through activated-charcoal-filled glass tubes, and pre- and postshift urine samples were collected. The TEA concentrations were determined by gas chromatography. TEA was measured in air and urine samples from the same shift. Breathing-zone measurements of 19 workers in 3 foundries were included in the study, and stationary and continuous air measurements were also made in the same foundries. Pre- and postshift urine samples were analyzed for their TEA and triethylamine-N-oxide (TEAO) concentrations. The TEA concentration range was 0.3-23 mg/cu m in the breathing zone of the core makers. The mean 8-hr time-weighted average exposure levels were 1.3, 4.0, and 13 mg/cu m for the three foundries. Most of the preshift urinary TEA concentrations were under the detection limit, whereas the postshift urinary TEA concentrations ranged between 5.6 and 171 mmol/mol creatinine. The TEAO concentrations were 4-34% (mean 19%) of the summed TEA + TEAO concentrations. The correlation between air and urine measurements was high (r=0.96, p<0.001). A TEA air concentration of 4.1 mg/cu m (the current ACGIH 8-hr time-weighted average threshold limit value) corresponded to a urinary concentration of 36 mmol/mol creatinine.

In 20 workers studied before, during, and after exposure to triethylamine (TEA) in a polyurethane-foam producing plant the amount of TEA and its metabolite triethylamine-N-oxide (TEAO) excreted in urine corresponded to an average of 80% of the inhaled amount. An average of 27% was TEAO, but with a pronounced interindividual variation. Older subjects excreted more than younger ones; less than 0.3% was excreted as diethylamine.

Cellular LocationsCytoplasm

Uses & manufacturing

Uses · 6 items

Triethylamine is used as a catalytic solvent in chemical syntheses; as an accelerator activator for rubber; as a corrosion inhibitor; as a curing and hardening agent for polymers; as a propellant; in the manufacture of wetting, penetrating, and waterproofing agents of quaternary ammonium compounds; and for the desalination of seawater.

Used as a catalyst for polyurethane foams, an accelerator for rubber, and a curing agent for amino and epoxy resins; (HSDB) Used as an accelerator in photography development; [ILO Encyclo: Amines, Aliphatic] Used to make quaternary ammonium compounds and as a catalyst to make sand-based cores and molds; [ACGIH]

Molding and Core Making [Category: Foundry]

CHEMICAL INTERMEDIATE; ANTI-LIVERING AGENT FOR UREA & MELAMINE BASED ENAMELS; RECOVERY OF GELLED PAINT VEHICLES; CATALYST FOR POLYURETHANE FOAMS; FLUX FOR COPPER SOLDERING

Catalytic solvent in chemical synthesis; accelerator activators for rubber; wetting, penetrating, and waterproofing agents of quaternary ammonium types; curing and hardening of polymers (e.g., core-binding resins); corrosion inhibitor; propellant.

Catalyst for epoxy resins

ImpuritiesACS Standards: Ammonia: not more than 0.2% by wt of soln; formaldehyde: not more than 0.3% by wt of soln
U.S. Production · 6 items

2023: 10,000,000 - <50,000,000 lb

(1972) 2.02X10+10 G (MONO & TRIETHYLAMINE)

(1975) PROBABLY GREATER THAN 9.08X10+5 G

(1981) 16,084X10+3 lb

(1984) 19,359X10+3 lb

For more U.S. Production (Complete) data for TRIETHYLAMINE (8 total), please visit the HSDB record page.

Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesSolvent
Methods of Manufacturing · 3 items

Prep by reaction of N,N-diethylacetamide with lithium aluminum hydride ... Manufactured by vapor phase alkylation of ammonia with ethanol ... .

Derivation: From ethyl chloride and ammonia with heat and pressure.

... Triethylamine can be produced from acetaldehyde, ammonia, and hydrogen in the presence of a hydrogenation catalyst.

Formulations/PreparationsPurity: 98.5% min
Household ProductsInformation on 11 consumer products that contain Triethylamine in the following categories is provided:
Use Classification · 2 items

Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes

Flavoring Agents -> JECFA Flavorings Index

General Manufacturing Information · 2 items

Pesticide, Fertilizer, and Other Agricultural Chemical Manufacturing

Ethanamine, N,N-diethyl-: ACTIVE

Applications · 3 items

UsesTriethylamine is a clear, colorless liquid with an Ammonia or fish-like odor. It is used in making waterproofing agents, and as a catalyst, corrosion inhibitor and propellant. It is mainly used as base, catalyst, solvent and raw material in organic synthesis and is generally abbreviated as Et3N, NEt3 or TEA. It can be used to prepare phosgene polycarbonate catalyst, polymerization inhibitor of tetrafluoroethylene, rubber vulcanization accelerator, special solvent in paint remover, enamel anti-hardener, surfactant, antiseptic, wetting agent, bactericides, ion exchange resins, dyes, fragrances, pharmaceuticals, high-energy fuels, and liquid rocket propellants, as a curing and hardening agent for polymers and for the desalination of seawater. Consumption Quota of in medical industry: Medicine Consumption Quota(Unit: t/t) Ampicillin sodium 0.465 Amoxicillin 0.391 Cefazolin sodium 2.442 Cefazolin organism 1.093 Oxygen piperazine penicillin 0.584 Ketoconazole 8.00 Vitamin B6 0.502 Fluorine organism acid 10.00 Praziquantel 0.667 Thiotepa 1.970 Penicillamine 1.290 Berberine hydrochloride 0.030 Verapamil 0.540 Alprazolam 3.950 Adjacent benzene acetic acid 0.010

UsesTriethylamine is a base used to prepare esters and amides from acyl chlorides as well as in the synthesis of quaternary ammonium compounds. It acts as a catalyst in the formation of urethane foams and epoxy resins, dehydrohalogeantion reactions, acid neutralizers for condensation reactions and Swern oxidations. It finds application in reverse phase high-performance liquid chromatography (HPLC) as a mobile-phase modifier. It is also used as an accelerator activator for rubber, as a propellant, as a corrosion inhibitor, as a curing and hardening agent for polymers and for the desalination of seawater. Furthermore, it is used in the automotive casting industry and the textile industry.

General DescriptionTriethylamine appears as a clear colorless liquid with a strong ammonia to fish-like odor. Flash point 20°F. Vapors irritate the eyes and mucous membranes. Less dense (6.1 lb / gal) than water. Vapors heavier than air. Produces toxic oxides of nitrogen when burned.

Upstream & downstream products

Upstream raw materials

EthanolDiethylamineKAOLINEthanol 95%HydrogenTriethanolamineAmmonia

Downstream products

Di-2-pyridyl thionocarbonateindomethacin farnesilMethyl 2-aminothiophene-3-carboxylatepolyurethane water-based emulsion finishes PU-II series4-Cyanophenyl isocyanateMethyl trans-2-nonenoate2-Cyano-4-pyridine carboxylic acid2-amino-5-chloro-diphenyl methanol2-Mercaptobenzothiazolyl-(Z)-(2-aminothiazol-4-yl)-2-(tert-butoxycarbonyl) isopropoxyiminoacetate2-Thienyl isocyanateN,N-DiethylhydroxylamineTri-tert-butyl 1 4 7 10-tetraazacyclodod(R)-Glycidyl butyrate3-[(N-(tert-Butyloxycarbonyl)amino)methyl]pyridineTetraethylammonium bromide2-Methoxyphenyl isocyanate2-Chlorophenyl isocyanateMetazachlor1-(4-Nitrobenzenesulfonyl)-1H-1,2,4-triazoleEthyl 2-phenyl-3-(trifluoromethyl)pyrazole-4-carboxylateCamostatS-2-Benzothiazolyl 2-amino-alpha-(methoxyimino)-4-thiazolethiolacetatePyridat4-Methoxyphenyl isocyanateAmpicillin trihydrate2-Fluorophenyl isocyanateDichlormid3-Cyanophenyl isocyanate5-tert-Butoxycarbonylamino-pyridine-3-carboxylic acid6-Fluoro-4-hydroxy-2-(trifluoromethyl)quinolineTriisopropyl phosphiteTert-butyl bis(2-chloroethyl)carbamate4-(Boc-aminomethyl)pyridine4-Fluorophenyl isocyanate3-Hydroxy-6-methyl-2-pyridinemethanolMethyl 3-[(2-bromoacetyl)amino]thiophene-2-carboxylatefluorocarbon sulfactant 62015-Chloro-2-(methylthio)pyrimidine-4-carboxylic acid3-Fluorophenyl isocyanate3,4-(Methylenedioxy)phenyl isocyanate

Additional notes

DefinitionChEBI: Triethylamine is a tertiary amine that is ammonia in which each hydrogen atom is substituted by an ethyl group.