HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Octanoyl chloride → Bromoxynil octanoate

HRID 1111480
Print

Reaction equation

HRID 1111480 reaction equation
[OH-].[Na+].[OH:3][C:4]1[CH:11]=[CH:10][C:7]([C:8]#[N:9])=[CH:6][CH:5]=1.O.[Br-:13].[Ca+2].[Br-:15].ClCl.BrBr.[C:20](Cl)(=[O:28])[CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27]>C1(C)C=CC=CC=1.O>[C:20]([O:3][C:4]1[C:11]([Br:13])=[CH:10][C:7]([C:8]#[N:9])=[CH:6][C:5]=1[Br:15])(=[O:28])[CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

9

Reactant 6

HCID 8124Octanoyl chlorideHCID 130194-CyanophenolHCID 14798Sodium Hydroxide2×HCID 24408BromineHCID 24526Chlorine2×HCID 17749113Calcium bromide hydrate

Product 1

HCID 15533
Bromoxynil octanoate
Yield 155.9%

Reagents, catalysts & solvents 2

HCID 962WaterSolventHCID 1140TolueneSolvent

Procedure

To a 1 L flask fitted with a condenser, mechanical stirrer, condenser, gas inlet port, and a sodium hydroxide scrubber was charged 4-hydroxybenzonitrile (62.5 g, 525 mmol), calcium bromide monohydrate (125.9 g, 577 mmol), and water (350 mls). To the resulting suspension was slowly added a 46% w/w sodium hydroxide solution (160 g, 1838 mmol) such that the temperature did not rise above 30° C. Chlorine gas (85 g, 1197 mmol) was bubbled into the suspension at such a rate that the temperature did not rise above 50° C. and that the bromine fumes were not visible. When the chlorine addition was complete, the suspension was stirred for one hour. To the suspension was charged toluene (300 mls), and octanoyl chloride (89.6 g, 551 mmol) was then added to the rapidly-stirred solution over half an hour, while the temperature was kept below 30° C. When addition was complete, stirring was continued for an hour. Stirring was stopped, the phases were separated and the toluene layer was washed with 15% brine solution (200 mls). The toluene layer was dried by azeotropic distillation of water to give 330 g of a brick red solution of bromoxynil octanoate.

Workup

  1. customTo a 1 L flask fitted with a condenser, mechanical stirrer, condenser, gas inlet port
  2. customdid not rise above 30° C
  3. additionwas then added to the rapidly-stirred solution over half an hour, while the temperature
  4. customwas kept below 30° C
  5. additionWhen addition
  6. stirringstirring
  7. waitwas continued for an hour
  8. stirringStirring
  9. customthe phases were separated
  10. washthe toluene layer was washed with 15% brine solution (200 mls)
  11. dry with materialThe toluene layer was dried by azeotropic distillation of water

Sources & evidence

ORD record
ord-1bbc612d29844e458279efa31040388d
Source dataset
uspto-grants-1990_12
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US04980493

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes