HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Cyclohexanone → Cyclohexanone, 2-[(4-methoxyphenyl)methylene]-

HRID 1158271
Print

Reaction equation

HRID 1158271 reaction equation
[CH:1](=O)[C:2]1[CH:7]=[CH:6][C:5]([O:8][CH3:9])=[CH:4][CH:3]=1.[C:11]1(=[O:17])[CH2:16][CH2:15][CH2:14][CH2:13][CH2:12]1.[OH-].[Na+]>CCCCCC.C1(C)C=CC=CC=1.O>[CH3:9][O:8][C:5]1[CH:6]=[CH:7][C:2]([CH:1]=[C:12]2[CH2:13][CH2:14][CH2:15][CH2:16][C:11]2=[O:17])=[CH:3][CH:4]=1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

7

Reactant 3

HCID 7967CyclohexanoneHCID 14798Sodium HydroxideHCID 312444-Methoxybenzaldehyde

Product 1

HCID 364010Cyclohexanone, 2-[(4-methoxyphenyl)methylene]-Yield 74.3%

Reagents, catalysts & solvents 3

HCID 962WaterSolvent3×
HCID 1140
Toluene
Solvent
2×
HCID 8058HexaneSolvent

Conditions

Temperature
65 °C

Procedure

In a 1,000-ml, four-necked flask equipped with a mechanical stirrer, a reflux condenser and a thermometer were placed 68 g (0.5 mole) of p-anisaldehyde, 147 g (1.5 moles) of cyclohexanone and then 200 ml of water slowly. Thereto was slowly added, in a water bath, an aqueous solution obtained by diluting 80 g (0.5 mole) of a 25% aqueous sodium hydroxide solution, with 300 ml of water. The system was stirred at 65° C. for 48 hours and cooled to room temperature. To the system were added 400 ml of toluene and 100 ml of water for phase separation. The aqueous layer was re-extracted with 100 ml of toluene. The toluene layers were combined and washed with water and a saturated aqueous sodium chloride solution in this order. The resulting toluene layer was dried over anhydrous sodium sulfate and subjected to vacuum distillation to remove toluene and the excessive (remaining) cyclohexanone. To the crude oil obtained were added 80 ml of toluene and 80 ml of n-hexane for recrystallization, to obtain 80.4 g of yellow crystals. Yield: 74% The purity of the intended product in the crystals was 88% as measured by high performance liquid chromatography.

Workup

  1. customIn a 1,000-ml, four-necked flask equipped with a mechanical stirrer, a reflux condenser
  2. additionThereto was slowly added, in a water bath
  3. customan aqueous solution obtained
  4. temperaturecooled to room temperature
  5. customfor phase separation
  6. extractionThe aqueous layer was re-extracted with 100 ml of toluene
  7. washwashed with water
  8. dry with materialThe resulting toluene layer was dried over anhydrous sodium sulfate
  9. distillationsubjected to vacuum distillation
  10. customto remove toluene
  11. customTo the crude oil obtained
  12. customfor recrystallization

Sources & evidence

ORD record
ord-1a100f660b95437fb00b7c94b235feda
Source dataset
uspto-grants-2010_10
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US07807856B2

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes