HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Sulfuric Acid → 5-(4-Chlorophenyl-phenylmethyl)-2-pyridone

HRID 1390328
Print

Reaction equation

HRID 1390328 reaction equation
[Cl:1][C:2]1[CH:15]=[CH:14][C:5]([CH:6](O)[C:7]2[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=2)=[CH:4][CH:3]=1.[OH:16][C:17]1[CH:22]=[CH:21][CH:20]=[CH:19][N:18]=1.S(=O)(=O)(O)O.C(OCC)(=O)C>O>[Cl:1][C:2]1[CH:15]=[CH:14][C:5]([CH:6]([C:7]2[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=2)[C:20]2[CH:21]=[CH:22][C:17](=[O:16])[NH:18][CH:19]=2)=[CH:4][CH:3]=1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

6

Reactant 4

HCID 1118Sulfuric AcidHCID 84014-ChlorobenzhydrolHCID 8857Ethyl AcetateHCID 178516071HCID 178516071, compound

Product 1

HCID 227487995-(4-Chlorophenyl-phenylmethyl)-2-pyridone

Reagents, catalysts & solvents 1

HCID 962Water
Solvent

Conditions

Temperature
25 °C

Procedure

Combine 109.3 g. (0.5 mole) of 4-chlorobenzhydrol with 142.7 g. (1.5 mole) of 2-hydroxypyridine and heat at 150° C. with stirring until molten. Add about 2 ml. of concentrated sulfuric acid and continue heating to 240°-250° C. while removing water from the reaction mixture. Permit the reaction to continue for about 2 hours, then cool the reaction mixture to about 25° C. Treat the resulting solid with ethyl acetate and water and filter to remove the undesired 3-(4-chlorophenyl-phenylmethyl)-2-pyridone. The organic layer is separated and washed with water several times and dried over potassium carbonate and filtered. Concentrate the filtrate to half volume and filter to remove the remaining 3-substituted-2-pyridone. Evaporate the filtrate and dissolve the residue in ethyl ether. Upon standing overnight the 5-(4-chlorophenyl-phenylmethyl)-2-pyridone crystallizes, yield 60 g., m.p. 164°-169° C.

Workup

  1. additionAdd about 2 ml
  2. customwhile removing water from the reaction mixture
  3. customthe reaction
  4. filtrationfilter
  5. customto remove the undesired 3-(4-chlorophenyl-phenylmethyl)-2-pyridone
  6. customThe organic layer is separated
  7. washwashed with water several times
  8. dry with materialdried over potassium carbonate
  9. filtrationfiltered
  10. concentrationConcentrate the filtrate to half volume
  11. filtrationfilter
  12. customto remove the remaining 3-substituted-2-pyridone
  13. customEvaporate the filtrate
  14. dissolutiondissolve the residue in ethyl ether
  15. waitUpon standing overnight
  16. customthe 5-(4-chlorophenyl-phenylmethyl)-2-pyridone crystallizes

Sources & evidence

ORD record
ord-072bd13939bc4688af71208be225f59c
Source dataset
uspto-grants-1979_02
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US04138488

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes