HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.0
  1. Home
  2. /Reaction

Acetic Acid → (E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbaldehyde

HRID 1615211
Notes
Print preview

Reaction equation

HRID 1615211 reaction equation
N1[CH:6]=[CH:5][C:4](/[CH:7]=[CH:8]/[C:9]2[C:17]3[C:12](=[CH:13][C:14]([C:18]#N)=[CH:15][CH:16]=3)[NH:11][N:10]=2)=[CH:3]C=1.CC(O)=O.[CH3:24][N:25](C=O)C.[PH2]([O-])=[O:30].[Na+]>N1C=CC=CC=1.O.[Ni]>[N:25]1[CH:24]=[CH:6][CH:5]=[C:4](/[CH:7]=[CH:8]/[C:9]2[C:17]3[C:12](=[CH:13][C:14]([CH:18]=[O:30])=[CH:15][CH:16]=3)[NH:11][N:10]=2)[CH:3]=1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

8

Reactant 4

HCID 176Acetic AcidHCID 6228DimethylformamideHCID 66734432(E)-3-(2-(pyridin-4-yl)vinyl)-1H-indazole-6-carbonitrileHCID 178527019HCID 178527019, compound

Product 1

HCID 86651944(E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbaldehydeYield 50%

Reagents, catalysts & solvents 3

HCID 935
Nickel
Catalyst
HCID 962WaterSolvent3×
HCID 1049PyridineSolvent

Conditions

Temperature
0 °C

Procedure

To a suspension of (E)-3-(2-(pyridin-4-yl)vinyl)-1H-indazole-6-carbonitrile (984 mg, 3 mmol) in pyridine (30 mL) was added HOAc (8 mL), followed by DMF (30 mL). The resulting mixture was heated and sonicated to make a clear solution. After cooling to 0° C., a solution of sodium hypophosphite (1.408 g, 16 mmol) in H2O (8 mL) was added, followed by Raney-Nickel 2400 (slurry in H2O, 0.8 mL). The resulting mixture was heated at 60° C. (oil temp.) for 1 h before cooling to rt. H2O (50 mL) was added and the mixture was extracted with EtOAc (100 mL+50 mL×2). The combined extracts were dried (Na2SO4). Removal of low boiling point solvents gave a yellow solution in DMF (about 30 mL); H2O (500 mL) was added with swirling and a yellow precipitate formed. After standing 10 min, the resulting precipitate was collected by suction filtration, rinsed with H2O and dried under high vacuum to give the title compound (500 mg, 50%) as a yellow solid. 1H NMR (400 MHz, DMSO-d6) δ 13.79 (s, 1H, NH), 10.14 (s, 1H, CHO), 8.90 (s, 1H), 8.48 (d, J=4.8 Hz, 1H), 8.39 (d, J=8.0 Hz, 1H), 8.19 (d, J=9.2 Hz, 1H, partially overlapping with the singlet at 8.18 ppm), 8.18 (s, 1H, partially overlapping with the doublet at 8.19 ppm), 7.75 (d, J=16.4 Hz, 1H), 7.69 (d, J=8.4 Hz, 1H), 7.59 (d, J=16.8 Hz, 1H), 7.43 (dd, J=8.0 Hz, 5.2 Hz, 1H); MS ESI 250.0 [M+H]+, calcd for [C15H11N3O+H]+ 250.1.

Workup

  1. temperatureThe resulting mixture was heated
  2. customsonicated
  3. temperatureThe resulting mixture was heated at 60° C. (oil temp.) for 1 h
  4. temperaturebefore cooling to rt
  5. extractionthe mixture was extracted with EtOAc (100 mL+50 mL×2)
  6. dry with materialThe combined extracts were dried (Na2SO4)
  7. customRemoval of low boiling point solvents
  8. customgave a yellow solution in DMF (about 30 mL)
  9. customa yellow precipitate formed
  10. filtrationthe resulting precipitate was collected by suction filtration
  11. washrinsed with H2O
  12. customdried under high vacuum

Sources & evidence

ORD record
ord-3d120fe0883e43a79b40c716f5812568
Source dataset
uspto-grants-2014_07
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US08765748B2

Reaction notes

Loading…

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes