[CH:1]([C:9]1=[CH:10][C:11]([O:13][C:14]1=[O:15])=O)=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.C=CC1C=CC=CC=1.C1C(=O)OC(=O)C=1.[CH3:31][N:32]([CH3:37])[CH2:33][CH2:34][CH2:35][NH2:36]>CN(C)C=O>[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[CH3:31][N:32]([CH3:37])[CH2:33][CH2:34][CH2:35][N:36]1[C:14](=[O:15])[CH:9]=[CH:10][C:11]1=[O:13]A solution of 250 g of copoly(styrene-maleic anhydride (commercially available from the Monsanto Chemical Company under the tradename of Lytron 810) in 2500 ml of dry dimethylformamide is made by stirring in a 5-liter flask, containing a reflux condenser, thermometer, stirrer, and dropping funnel. The mixture is heated to 110°C and 230 g of N,N-dimethyl-1,3-propanediamine is added slowly at a rate to keep the mixture boiling slightly. Polymer precipitates as a gummy mass at first but goes back into solution after about half of the amine is added. The condenser is replaced by a distillation column and about 500 ml of material is removed by distillation with stirring. The residue is cooled, precipitated in water, collected by filtration and air-dried at room temperature for 2 days. The solid is dissolved in acetone, and again precipitated in water and air-dried. Yield = 260 g of off-white, friable solid.