HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Ethyl 4-methylnicotinate → Ethyl 4-methylpiperidine-3-carboxylate

HRID 1808700
Print

Reaction equation

HRID 1808700 reaction equation
[CH2:1]([O:3][C:4](=[O:12])[C:5]1[C:10]([CH3:11])=[CH:9][CH:8]=[N:7][CH:6]=1)[CH3:2].C(O)(=O)[C@@H]([C@H](C(O)=O)O)O>C(O)C.[Pt]=O>[CH2:1]([O:3][C:4]([CH:5]1[CH:10]([CH3:11])[CH2:9][CH2:8][NH:7][CH2:6]1)=[O:12])[CH3:2]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

5

Reactant 2

HCID 409602Ethyl 4-methylnicotinateHCID 444305L-Tartaric acid

Product 1

HCID 13658603Ethyl 4-methylpiperidine-3-carboxylateYield 90.5%

Reagents, catalysts & solvents 2

HCID 82844Platinum oxide (PtO)CatalystHCID 702EthanolSolvent

Procedure

A Parr bottle was charged with ethyl-4-methylnicotinoate (5.01 g, 30.32 mmol), L-(+)-tartaric acid (4.67 g, 31.2 mmoL) and platinum oxide (Adams catalyst, 827 mg). The material was taken up in absolute ethanol (100 mL) and shaken on the PARR overnight under hydrogen atmosphere (50 psi). The material was filtered through a plug of celite, and the filtrate was concentrated on the rotovap such that about 85% of the solvent was removed. The remainder was taken up in ethyl acetate (120 mL) and aqueous saturated sodium bicarbonate solution (120 mL) and shaken in a separatory funnel. The ethyl acetate phase was collected. The aqueous phase was treated with 2N sodium hydroxide solution (25 mL) and shaken with ethyl acetate (100 mL). The ethyl acetate phase was collected and the aqueous phase back extracted with ethyl acetate (100 mL). The organic phases were combined, dried (MgSO4), filtered and stripped to provide 4.7 g of (+/−)-4-methyl-piperidine-3-carboxylic acid ethyl ester as a mobile yellow oil. MS (M+H)+=172.

Workup

  1. filtrationThe material was filtered through a plug of celite
  2. concentrationthe filtrate was concentrated on the rotovap such that about 85% of the solvent
  3. customwas removed
  4. stirringaqueous saturated sodium bicarbonate solution (120 mL) and shaken in a separatory funnel
  5. customThe ethyl acetate phase was collected
  6. additionThe aqueous phase was treated with 2N sodium hydroxide solution (25 mL)
  7. stirringshaken with ethyl acetate (100 mL)
  8. customThe ethyl acetate phase was collected
  9. extractionthe aqueous phase back extracted with ethyl acetate (100 mL)
  10. dry with materialdried (MgSO4)
  11. filtrationfiltered

Sources & evidence

ORD record
ord-5a05e3263f044802bd5214cfc29d7b3c
Source dataset
uspto-grants-2013_01
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US08361962B2

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes