HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

2-Mercaptoethanol → Acrylic acid vinylpyrrolidone

HRID 2169658
Print

Reaction equation

HRID 2169658 reaction equation
[CH:1]([N:3]1[CH2:7][CH2:6][CH2:5][C:4]1=[O:8])=[CH2:2].[C:9]([OH:13])(=[O:12])[CH:10]=[CH2:11].N(C(C1NCCN=1)(C)C)=NC(C1NCCN=1)(C)C.SCCO>CC(C)=O.O.CS(C)=O>[CH:1]([N:3]1[CH2:7][CH2:6][CH2:5][C:4]1=[O:8])=[CH2:2].[C:9]([OH:13])(=[O:12])[CH:10]=[CH2:11]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

8

Reactant 4

HCID 15672-MercaptoethanolHCID 6581Acrylic AcidHCID 6917N-vinyl-2-pyrrolidoneHCID 887152,2'-Azobis(2-(2-imidazolin-2-yl)propane)

Product 1

HCID 197163Acrylic acid vinylpyrrolidone

Reagents, catalysts & solvents 3

HCID 180Acetone
Solvent
2×
HCID 679Dimethyl SulfoxideSolvent
HCID 962WaterSolvent

Procedure

In a 500 mL three-necked flask, N-vinylpyrrolidone (66.68 g, 0.60 mol), acrylic acid (21.62 g, 0.30 mol), dimethyl sulfoxide (353.96 g), a polymerization initiator VA-061 (Wako Pure Chemical Industries, Ltd., 0.1408 g, 0.562 mmol) and 2-mercaptoethanol (43.8 μL, 0.63 mmol) were charged, and then equipped with a three-way stop-cock, a reflux condenser tube, a thermometer and a mechanical stirrer. The concentration of the monomer was 20% by weight. After degassing inside the three-necked flask using a vacuum pump and repeating replacement by argon three times, stirring was carried out at 50° C. for 0.5 hours, followed by temperature rise to 70° C. and further stirring for 6.5 hours. After completion of the polymerization, the polymerization reaction solution was cooled to room temperature and 100 mL of water was added, and then the solution was poured into 400 mL of acetone and the mixed solution was left to stand overnight. On the next day, 200 mL of acetone was further added and the solution was left to stand, and then the supernatant was removed by decantation. The obtained solid component was washed seven times with acetone/water (=400 mL/100 mL). The solid component was dried overnight by a vacuum drying oven at 60° C. Liquid nitrogen was charged and the solid component was crushed by a spatula, and then dried by a vacuum drying oven at 60° C. for 3 hours. The thus obtained copolymer had a molecular weight of Mn: 46 kD, Mw: 180 kD (Mw/Mn=3.9).

Workup

  1. customequipped with a three-way
  2. customAfter degassing inside the three-necked flask
  3. customfollowed by temperature rise to 70° C.
  4. stirringfurther stirring for 6.5 hours
  5. customAfter completion of the polymerization
  6. customthe polymerization reaction solution
  7. waitthe mixed solution was left
  8. waitto stand overnight
  9. waitthe solution was left
  10. customthe supernatant was removed by decantation
  11. washThe obtained solid component was washed seven times with acetone/water (=400 mL/100 mL)
  12. customThe solid component was dried overnight by a vacuum
  13. customdrying oven at 60° C
  14. additionLiquid nitrogen was charged
  15. customthe solid component was crushed by a spatula
  16. customdried by a vacuum
  17. customdrying oven at 60° C. for 3 hours

Sources & evidence

ORD record
ord-1f6d9e0b9f7a427b8db95018e01e74c5
Source dataset
uspto-grants-2015_06
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US09046644B2

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes