HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

1-Butanol → Dibutyl carbonate

HRID 257234
Print

Reaction equation

HRID 257234 reaction equation
[CH2:1]([OH:5])[CH2:2][CH2:3][CH3:4].[C:6](=[O:8])=[O:7].[CH2:9](Cl)[CH2:10][CH2:11][CH3:12].C(=O)([O-])N>CC#N.C(OCC)C>[C:6](=[O:8])([O:7][CH2:9][CH2:10][CH2:11][CH3:12])[O:5][CH2:1][CH2:2][CH2:3][CH3:4]
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

7

Reactant 4

HCID 2631-ButanolHCID 276CarbamateHCID 280Carbon Dioxide5×HCID 8005Butyl Chloride2×

Product 1

HCID 68333Dibutyl carbonateYield 73%

Reagents, catalysts & solvents 2

HCID 3283Diethyl Ether
Solvent
HCID 6342AcetonitrileSolvent2×

Conditions

Temperature
85 °C

Procedure

A 160 cc Parr autoclave was charged with 2.22 g (0.03 mol) butanol, 6.9 g (0.035 mol) N-cyclohexyl-N',N',N",N"-tetramethylguanidine and 30 mL CH3CN. The autoclave was attached to a pressure head and at room temperature with stirring was added 160 psig carbon dioxide. Addition of CO2 resulted in an exothermic reaction with a rise in temperature to ca. 40° C. Into a Fischer-Porter bottle was added 8.33 g (0.09 mol) butyl chloride in 10 mL CH3CN. This mixture was attached to a pressure head and 80 psig carbon dioxide was added above the solution. After 1 h the butyl chloride solution was added all at once under 80 psig CO2 to the pre-formed carbamate anion solution generated in the autoclave. After addition the pressure was raised to 160 psig with carbon dioxide and the reaction mixture was warmed to 85° C. for 16 h. After this time the reaction mixture was allowed to cool to room temperature and then the pressure was released. An aliquot was taken, diluted with diethyl ether, Cl-+HCyTMG filtered off and by G.C. analysis a 73% yield of dibutyl carbonate was calculated. Oil 1H NMR (CDCl3) 4.14(t, J=6.6 Hz, 4H), 1.66 (m, 4H), 1.41 (m, 4H), 0.94 (t, J=7.3 Hz, 6H). 13C{1H} NMR (CDCl3) 155.9, 68.2, 31.2, 19.4, 14.1. IR (film) 1746, 1260; MS (FAB) m/z=175 (MH+).

Workup

  1. customwas attached to a pressure head and at room temperature
  2. customresulted in an exothermic reaction with a rise in temperature to ca. 40° C
  3. additionwas added above the solution
  4. additionAfter addition the pressure
  5. temperatureto cool to room temperature
  6. filtrationfiltered off and by G.C

Sources & evidence

ORD record
ord-a6c135bcc66647b79dc329f9be6e90db
Source dataset
uspto-grants-1993_11
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US05260473

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes